I am trying to get sound drivers onto Windows 7 part of my Mac

Ok, so I have my hardrive split up. Half Mac OS X, half Windows 7. The Windows 7 part, doesn't have the drivers I need. I can't use the same scroll techniques as on OS X or anything, but my main problem is the sound drivers. I CAN'T GET SOUND! GRR!!! I had a friend tell me to use the utility disk that came with my Mac while I'm on Windows and that should give me all the drivers I need. But I don't even know what the utility disk is or what it looks like! I NEED HELP!!!!! :'(

If you used Boot Camp Assistant to partition the drive and install Windows you should visit the Boot Camp forum. Driver installation questions and answers are posted regularly.
https://discussions.apple.com/community/windows_software/boot_camp
If you are running Snow Leopard the drivers are on your Snow Leopard install disk. If you are running Lion, you download the drivers from within Boot Camp Assistant.
Read the Boot Camp Install and Help guides. http://www.apple.com/support/bootcamp/
If you did not use Boot Camp Assistant I can't help you. Someone else will be along.

Similar Messages

HT1373 i have a broken desktop which had my itunes account on it. I am trying to get the information onto a new laptop and itunes programme but cannot. I also cannot get my iphone 5 to be recognized on the new itunes. HELP

i have a broken desktop which had my itunes account on it.
I am trying to get the information onto a new laptop and itunes programme but cannot. I have only managed to copy over some of my music as i had it on an external drive.
I also cannot get my iphone 5 to be recognized on the new itunes.
HELP

iTunes as you see it in the application window uses a series of files and folders contained in the iTunes folder. Some people make the mistake of only backing up their media in which case all you have is a bunch of media files without the iTunes structure. In that case you have to build a new library yourself.
What exactly do you mean "not recognized"? The phone does not show up on the computer at all, or it does but it says it will wipe the phone? The wipe the phone stuff is again because it cannot find the original library to which it was synced. You need to transfer the entire iTunes folder from the old computer or the backup you made of it.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

Error 0xE0000235 when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.

Unfortunately, Error 0xE0000235 occurs when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.
I am installing the GV 800 GeoVision 32/64Bit 16CH Video Capture Card onto the server.
Please urgently assist.
Answer in clear English. Cryptic answers not welcome. Yes...I know you are an intelligent, highly valuable expert on the world's leading edge technology.

Hi, I'd like to inform you that the error code 0xE0000235 refers to "Error in WOW64". This can be caused by corrupted or incompatible driver of the Video Capture Card. Similar issue may also occur on other driver on other operating system and I don't think
this can be caused by SBS2008 blocking the driver.
I suggest you contact with GeoVision Technical Support (http://www.geovision.com.tw/english/4_0.asp) and see if their driver should work on SBS2008 and make sure that you have downloaded
latest driver from their site:
http://www.geovision.com.tw/english/5_2.asp
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope this helps!
Sean Zhu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT201335 why can't i get sound when I mirror from the latest mac mini?

why can't i get sound when I mirror from the latest mac mini?

if you have sound icon on your menu bar: press alt on your keyboard and click mouse on sound icon - check is the correct audio output is selected.
If you do not have this icon: System preferences > Sound > Output and check audio output

HT1727 I purchased an iPad. I also have and existing iPhone. I'm trying to get app purchases onto my iPad. I downloaded the apps from iTunes to the iPad. The apps are on my iPad but are faded with "waiting" below. Nothing is happening.

I purchased an iPad. I also have an existing iPhone. I'm trying to get my purchased apps from my phone to my pad. I used iTunes and downloaded the apps to my iPad. The apps icon is dim and the word "waiting" or something like that is below. It's like the screen is frozen now. Help!! I can get out of the screen and start over but it leads me to this same point.
Thanks!!
MagiciansNephew

Welcome to the Apple community.
Try tapping the app again to restart the download. Downloading from the iTunes Store has been a little problematic of late, but if you keep trying they do eventually download.

Sound drivers for windows 7

i need sound drivers and the icamera driver for windows 7 32bit software.

They are on the OSx install disk. Assuming you installed Windows using Boot Camp Assistant, boot into Windows and install the drivers from the OSx disk.
You might want to head over to the Boot Camp Forum where the Boot Camp gurus hang out. Your question has been asked and answered many times over there. https://discussions.apple.com/community/windows_software/boot_camp

Trying to get sound from my X-FI Fatal1ty Titanium Pro. to Home Theatre via Optical Ca

Hi wondering if anyone has done this but I can't seem to get it to work. I have a X-Fi Fatalty Titanium Pro(w/o the Li've Dri've) on Vista 32-bit. Anywho it has the Optical I/O on the card itself and I am trying to hook this up to my Home Theater system. I have the optical already hooked up to the output on the card, and into my DVD input on my Yamaha receiver but am not getting any sound. So far that's all I have done, is there settings I am more than likely missing either in the Vista sound, creative console, etc....
Note:? I had this working before on my onboard sound and on XP, but since with the onboard I could only get some sounds playing through my home theater I decided to get this Fatalty Titanium card and the sound settings in Vista seems really vague not a lot of options.
Any help would be much appreciated.
Thanks,
Andy

I have a Yamaha RX-V3800, it's fairly new and supports just about every thing except true THX.
Not sure what DDL means, it just seems to me I am having a lot harder time with Vista setting than with XP. I had a X-Fi XtremeGamer installed but because it didn't have any Digital out so I had to use my onboard sound which has digital out in conjunction with my XtremeGamer. At least with XP you can choose say all my wave, payback sounds, etc.... to go through one device or the other, in my case either through the Realtek HD or the CL X-Fi XtremeGamer.
Now that I have the Fatalty and Vista and onboard sound disabled, I have a hard time seeing any options and settings if any at all that Vista has. ? Oh yes also with my old setup with the two sound devies, the only problem I had was that if I di'vert all the sound to my Home Theatre I would lose the sound in my Headset which I didn't want and had to change back and forth the audio devices to what I wanted.
I hope this helps answer your questions a little, and maybe help me answer mine.
Thanks for the reply.
Andy

Trying to get my photos onto new iphone 6

i got a new iphone 6 and need to get my photos off my ihone 6 but for some reason they wouldnt download from icloud like my apps and contacts how can i get them onto my new phone?

First, you have to back up all the available data on your existing iPhone, either via iCloud, using iTunes or FonePaw iOS Transfer on a Mac or Windows computer.
Then,You can use iCloud or iTunes to transfer your entire mobile system/data from your old iPhone to your new one. But it’s a clumsy, one-way process can be time consuming.
Get more information on Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support
Hope it is helpful for you.

I'm trying to download Firefox 4 onto Windows 7 platform. I keep getting an error message that says Java script has an error in Chrome ? Unable to complete download. Constant ahngs & freezes

I am running on Windows 7 platform. I tired to download the latest Firefox 4 release. Each time, I get the message that "there is an error on line 20 in Java script Chrome that is preventing the download from continuing. I've run Fox in safe mode & still get the same message.

Your More system details list shows that you use Firefox 4:
*Mozilla/5.0 (Windows NT 6.1; rv:2.0) Gecko/20100101 Firefox/4.0
Are you trying to (re)install Firefox 4 or do you get that error if you start Firefox?
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
If that still doesn't work then create a new profile as well.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

-50 error when trying to get Album Artwork onto iPod

Has anyone had the issue of getting an "unknown error" -50 when trying to sync Album Artwork? I have searched for a similar problem and have found nothing. The art work used to work on my old machine. I have recent change computers, but I moved all my music over to the new machine without any issues. Any insight would be helpful. Thanks.
DP

http://docs.info.apple.com/article.html?artnum=304996

I am trying to get sound from the MIDI output from an analogue synth (Prophet 08) as an External MIDI track in Logic Pro 8

I route the signal via an Edirol UA-25. I open a new project, new track and specify it as an External MIDI track. While the indicator light next to the Mute button blinks when I press a key, there is no sound.
Can you help me, please. I have read the manuals, to no avail...

David,
Learning is not a bad thing, I'm just saying what you thought MIDI did is in error, you're not the first.
Here's an article explaining what MIDI is and how it works, it probably seems less than you thought it capable of but the fact is, since it's standardization in 1983 it completely revolutionized electronic music. By the Way, the designers of the Prophet 8 (Dave Smith & Sequential Circuits) had a lot of input into the MIDI protocol, in fact, if you had to say one company/person came up with the basics of MIDI it was Sequential Circuits. They also came up with the first polyphonic, fully programmable analog synth. I had a very basic MIDI studio at the end of 1984.
http://entertainment.howstuffworks.com/midi1.htm

Trying to get sound back. Did everything. What do I do?

I have an Ipod touch(4th) and my sound doesn't work. I looked at a conversation and the apple people say to press the home and the power button at te same time. I did it, but it did not work what do I do?

Do you have any sound at all? Do the headphones produce sound but not the speaker? Or is the sound completely gone nothing from either the speaker or the headphones?
If headphones work but not the speaker, more than likely the switch inside the headphone port is stuck open. Try looking for foreign objects in the port, like lint or dirt, if something is there, try removing it by blowing it out.
If port appears to be clear try plugging / unplugging the jack quickly several times (10 to 12 times) to free the switch.
If no sound at all try going into Settings, Music, Volume Limit and make sure it is turned off.
If still no joy, try Reset All Settings. If that does not fix sound, make sure you backup your iPod to your computer first, then Restore from Backup, last resort; Restore to New. If that does not work you may have a hardware issue, contact Apple and have your iPod evaluated. Good luck, Cheers.

[915 Series] 915P Combo2 v3.2 sound drivers for Windows 7

Hey i'm having a problem trying to find a driver for my sound card there are no windows 7 updates for the 915p combo2 v3.2 and i was wondering if i could get some help getting one.

Holy thread from the dead Batman!
I'll split off your post from the 5 year dead thread.

Can't find sound drivers for windows xp

So I have a Satellite c655-s5061 which usually runs windows 7. I added a dual boot so now I have windows xp and windows 7. I did this because a game wasn't saving correctly in windows 7 and I figured I could play them better on xp anways with lower system requirements. The only sound I ever really hear is a beep. My problem is I can't find any drivers that work with windows xp to get my speakers to work. Any solution?

Satellite C655-S5542
Try this one from HP.
   Conexant High Definition Audio Driver
But the best way to get Windows XP on that machine is to upgrade to Windows 7 Professional (very simple) and add the free XP Mode.
   Windows Anytime Upgrade
   Windows XP Mode and Windows Virtual PC
If Toshiba does not enable hardware virtualization in that BIOS, there's a workaround.
   Error message about hardware-assisted virtualization for Windows XP Mode in Windows Virtual PC on a ...
-Jerry

I am trying to get sound drivers onto Windows 7 part of my Mac

Similar Messages

Maybe you are looking for