I am trying to import video and the audio doesn't upload with the video. Help.

I am trying to import video and the audio doesn't upload with the video. Help.
I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB).  The video imports but not the audio, what do I do?

What are you capturing from?  You may not hear the auido as it's captured but it will be there.  After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip?  If so then go to "View" then "Audio Playback"  and set it to 'Built-in Output" if you're monitoring audio through the computer.

Similar Messages

  • The Audio Doesn't Sync with the video

    Hi
    I'm a complete novice to captivate and I'm trying to capture
    an area within a IE web browser. I choose to add the audio at the
    same time as doing the video.
    What I get however is the audio does not seem to keep up very
    well with the video capture.
    In addition and perhaps this may be connected, if I click on
    a link on the webpage I am viewing and scroll up/down the page,
    captivate doesn't seem to be able to cope with it.
    When I play back the movie, I will see mouse hovering over
    and clicking where the relevant button would be had the video
    caught up, it's a couple of second behind.
    So I guess I have two problems.
    I apologise if I'm not providing all the correct information
    I would also be happy to create a captivate file and upload it to
    explain more clearly what the problem is.
    Regards
    Simon H

    Well I seem to be able to solve the video not keeping up with
    the scrolling by opting for the "record at high full motion "
    option
    I still seem to have the audio problem but what I also can't
    solve is that the mouse movement on the screen only shows when you
    actually click on a button, I want the mouse to move around so I
    can point to certain areas on the screen but without actually
    clicking on the links and taking the user away from the current
    view.
    Is that possible or does activate only allow the mouse to be
    showing moving around the screen if your clicking on an
    object

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

    Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
    Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
    The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
    Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
    I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
    Any way to fix it?

    only $99, i thought it was closer to $175.

  • IPhoto crasht when importing photos and now it doesn't open anymore. Please help!

    I was importing photos in iPhoto, when the program crasht. I tried to restart it, but it never opend. I installed it again and again and made a software update - still doesn't work. What can I do? Please help!

    What version of iPhoto? Assuming 09 or later
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • When importing a Quicktime file into iMovie the audio is inconsistently synchronised with the video. Any ideas?

    I record using Quicktime and the built in webcam on my MacBook Pro. When importing the file to iMovie the audio is inconsistent in its syncronisation with the video. Any ideas?

    This is probably caused by the internal webcam on Apple devices being optimized for FaceTime rather than for movie making. In FaceTime, the goal is to transmit the information using a little bandwidth as possible, so the video will be recorded at a variable frame rate. The frame rate will get low if you are still, and will speed up if there is a lot of motion.
    To fix, I would suggest that you use a free app like MPEG Streamclip. Drag the clip into MPEG Streamclip and export it out at a constant framerate.
    If it is an HD movie, I suggest exporting it from MPEG Streamclip using FILE/EXPORT TO QUICKTIME. Choose Apple Intermediate Codec as your video compression. For sound, choose uncompressed 48khz. That should work, but I can't test it right now. If MPEG Streamclip does not work for you, let me know and I can recommend another free tool.

  • Audio doesn't export with the video.

    I am using Premiere CS4 to edit a group of clips together (a couple of them with audio.) I can hear the sound when I play them on the premiere file but not once it is exported.
    My audio settings are: AAC, mono, 48khz, high, and the export audio checkbox turned on. I also tried with AAC version 1 and 2 but got the same results.
    The video codec I'm using is H.264, if that matters at all, but I tried quicktime too and it didn't work either.
    Any ideas what might be the problem or what am I missing?

    I thought I recalled reading something when CS4 was first released that indicated that its codecs process files differently than in the past and therefore it would be more critical in CS4 to keep all of your presets and sources matching more closely.  That in combination with Bill's comments got me thinking that there was probably something to it.  It prompted me to run some quick :30 tests on new projects with the same issues.
    I used both 48 & 44.1 project presets, 44.1 .mp3 and .wav source files, and 48 & 44.1 export presets.  I also threw a video track on there for comparison sake.  I expected the mixed source/presets to fail and the uniform source/presets to succeed.  Wrong.  End result was that everything exported as one would hope, error free and all without pre-rendering the timeline.
    So, go figure.  I guess I can only assume that there was some kind of hiccup/corruption in my original project file that prevented the audio from exporting like it should.  I am never comfortable with that answer though.  I need everything to make sense if I am going to sleep at night.
    -gcs01

  • CANopen: the PC doesn't communicate with the motor controller

    Hi there,
    I'm new with both Labview and CANopen and I'm trying to write a RXPDO on my Linmot motor controller(VI attached). I'm using a PCI CAN Series 2 card. 
    My VI worked just once ; I was able for example to move the motor with the JOG commands. 
    Now the VI runs without errors but any control word is not really sent to the controller.
    Sometimes (don't know why!!) after the CANopen create interface.vi, the interface object results "Not executed" but even when it is regularly executed, the motor doesn't receive the command.
    Can anyone help me to solve this problem? 
    Regards
    Alessandra
    NOTE: the linmot controllers need the count nibble to be incremented for each new command; I've set the auto-increment using the linmot software. 
    Attachments:
    ControlWord send.vi ‏26 KB

    Hi Loura,
    thank you for your suggestion. Unfortunately I already know those labview VIs, they are well developed but they don't run over the CANopen protocol.
    I think the problems I'm having in using my controllers with Labivew and CANopen could depend on the fact that the LV canopen library are not intended for use with the latest version of Labivew (which is the version I'm actually using).
    (It's the only explanation I have for strange behaviours dealing with open / close / reset can objects)
    Bye
    Alessandra

  • The sync doesn't work with the new version

    Hi, I have a Macbook version 10.4.11 I just to work with the  pocketmac for blackberry former version and It use to work great but since I did upgrade to the new version they system doesn't sync any contact, meeting....
    The system recognize my Blackberry  PIN and the status is "available" but nothing happens.
    Any suggestion?
    Thanks 

    I tried a whole slew of things and did manage to get it to sync by syncing each component one by one just to see if there was a problem area such as tasks or notes. That went fine but when I tried to do a full sync will all the components I need the sync would run and then then PocketMac would freeze and crash. Yesterday I decided I had spent more than enough time on this and bought MissingSync. So far it's great.

  • When I open Outlook the window doesn't open with the program

    When I click on the Outlook icon the program opens at the top of the screen, but the window showing my messages, inbox, etc is not opening up automatically and when I open it up using the MESSAGE VIEWER option under the Window option it lists all my inbox contents but I can not click on an email and open it up or view it in the window at the right of my screen.  When I double click it a new window opens but no message.

    Do you have a case on it?
    If so, remove and see if it helps.

  • How do I get the audio track to stick with the video track?

    Whenever I move or cut the video track I want it's audio track to move or cut with it, how do I get them to stay together so I don't have to do double work?
    This should be an easy one...Let's see who can answer first.....ready, set, GO!

    Sounds like Linked Selection is switched off. Check the button in the upper right of the timeline window. Shift-L will toggle it off and on.

  • I accidentally uninstalled the audio program that came with the computer many years ago. Now I have no sound at all on the computer and can't get it back without a CD apparently - but I have none.

    Can I reinstall an audio program that I accidentally removed? Does Firefox have an audio program I can use instead?

    VLC is a great, Free, player -> http://www.videolan.org/vlc/
    But changes are if you have no sound, you did more than uninstall a player, you uninstalled the driver....

  • Saved project only produces video and no audio

    I created a simple project with ony one AVI file.  I applied a single effect -- rotating the video from the portrait mode in which it was shot to landscape mode.  When I play the project in Premiere Elements v. 9 there is audio as well as video.  But when I export the project to an MPG or AVI file there is only video and no audio.  What could be the problem?

    P-Elements 9 http://help.adobe.com/en_US/premiereelements/using/index.html
    >should not require its users to dig into the esoterica of codecs
    Just as soon as you convince every camera vendor in the world to create video that uses only one codec, at only one set of parameters, you will be able to use software that works exactly the same for all files
    Until then... you really do need to know what you have so you may tell the software what to do with what you have
    You can't shove a slice of bread into a DVD player, and you can't put a DVD in a toaster (unless you want a mess in either case)
    >Multiplexing was already set for DVD
    In that case, you are getting exactly what you requested... a video file with no audio, and a separate audio file

  • Apex report result doesn't agree with the result of sql developer

    Hello guys,
    at the moment I try to create a standard report which takes his content from several spreadsheets. Because of some problems with the searchbar I'm not able to use an interactive report. The sql query contains a function, which sets some space characters into the content of a column. But there is a big problem. When I call my sql query in apex from the spreadsheets the result doesn't agree with the result which affords the sql developer.
    I know that the sql developer affords the right result.
    best regards
    wderr
    Edited by: user9072567 on 07.02.2010 12:57

    thats the query:
    select "TWORKITEM"."WORKITEMKEY",
    "TWORKITEM"."PROJCATKEY",
    "TPROJECT"."LABEL",
    "TWORKITEM"."PACKAGESYNOPSYS",
    replace(replace("TWORKITEM"."PACKAGEDESCRIPTION", chr(10), '<br>'),'<td></td>','&lt;td&gt;&lt;/td&gt;') packagedesc,
    suche_ohne_ti_be("TWORKITEM"."WORKITEMKEY") "CHANGEDESCRIPTION"
    from "TWORKITEM" "TWORKITEM", "TPROJECT" "TPROJECT", "TPROJCAT" "TPROJCAT"
    where "TWORKITEM"."PROJCATKEY" = "TPROJCAT"."PKEY"
    and "TPROJCAT"."PROJKEY" = "TPROJECT"."PKEY"
    and (instr(upper("TWORKITEM"."WORKITEMKEY"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."WORKITEMKEY"))) > 0
    or instr(upper("TPROJECT"."LABEL"), upper(nvl(:P10_SEARCHTEXT, "TPROJECT"."LABEL"))) > 0
    or instr(upper("TWORKITEM"."PACKAGESYNOPSYS"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."PACKAGESYNOPSYS"))) > 0
    or instr(upper("TWORKITEM"."PACKAGEDESCRIPTION"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."PACKAGEDESCRIPTION"))) > 0
    or instr(upper(suche_ohne_ti_be("TWORKITEM"."WORKITEMKEY")), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."WORKITEMKEY")))>0
    I mean with spreadsheets some tables/charts. And I take those informations from 3 of them.
    regards
    wderr

  • I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

    I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

    Hi
    I use
    • DV-PAL or DV-NTSC - or -
    • AIC
    Yours Bengt W

Maybe you are looking for