I am trying to install a memorex DVD Writer to my MAC AIR. Nothing happens. what do I do next? The instructions are to open My Computer and double click. Where is that on the Apple? I am used to a PC and I am completely lost.
How do I install an externql DVD player to my N
Mac Air?
Ok...
Try this - connect your dvd writer to your macbook air's usb port. insert any dvd in your external dvd.
click anywhere in your desktop until you see the words finder beside your apple logo - see image below.
from there click on finder - prefernces - general and put at checkmark on CDs, DVDs, and iPods.
exit that one and you should see your DVD ROM drive in your right top side on your screen - if it works that is.
Similar Messages
-
In Aperture album about 16 photos would show on screen and double clicking on one would enlarge it for adjustments. Now one larger image shows with about 7 photos at bottom. Options for controlling this no longer appear at top right. How do I correct this?
Do you mean the "View" controls are missing in your Toolbar?
To add these controls back to the Toolbar, use the View menu and select "Customize Toolbar". Drag the View Controls back to the Toolbar. -
dear all,
appreciate any help with the new iyune install.
get a message that itune.exe set to run in compatabilty mode for an older version of windows. i use windows7.
tried to follow the apple support instructions but found them misleading as couldn find compatability tab under (right click) prperties...
any other idea??
many thanksAmazing that someone noticed this post and took a stab at it after over a year... Actually, I found my answer long ago, and have tried to go back and post?it'son several boards where I had been looking for the answer. It seems to be such a common problem that I figure someone else can surely use this solution as I did. I would suggest that anyone?who is experiencing the frustration of not?getting their computer to recognize their device?read the very enlightening and helpful page that I am linking to here:
http://www.misticri'ver.net/forums/showthread.php?t=30939? (this is from a forum for iRi'ver, but the info and fix are uni'versal)
This simple solution involves correcting the ENUM keys in the Registry (not as scary as you might think) and deleting all instances of your player from the Device Manager and then reinstalling so that Windows and other applications will all recognize your player again. It's so simple, and once I tried it, I was amazed that's all it took to fix the problem.
?I?suggest you read the whole page and follow the instructions as they are given. I deleted and re-installed my player several times and then rebooted a couple of times before it took effect, but then it did, and I was able to download the Firmware and have had continued success with my original player that I posted about as well as others I have acquired since I first posted that message in 2006. For reasons I have not yet identified, this problem still happens every now and again, sometimes when I switch between players to synchronize. It may well be that when I use my registry cleaner or some other utility that "fixes" my registry, that it resets this particular key - but as long as it's easy to fix, it's not a problem. Hope this helps others who may stumble upon this odd little problem with the Zen Xtra.Message Edited by TrixieInDixie on -05-200709:28 PM -
Whenever I hit BACK the history list stays open below it until I click away from it in the window.
It used to disappear once you moved the mouse away from the list/back button but it seems to stay up almost every time now until I hit a key/mouse button etc. I tried to take a screenshot but when I hit print screen the drop down list disappears.
Or double click on the bar to the far right and it will reset.
Captfred -
Fried hard drive and replaced computer. Trying to authorize my new computer to download music on the account I created with old computer. I get a box that says the account hs already been created. I know that. I created it. Has anyone else out there run into this before?
Unless the process has changed, you won't be able to do that (I've been there, done that...). You can either opt to de-authorize all (doesn't matter if it's only one) which you're allowed to do once a year, or, if you don't want to "waste" that option, contact iTunes support.
-
Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
I am trying to uninstall itunes and keep getting an error that reads "the feature you are trying to use is on a network resource that is unavailable." Itunes on windows. Help!
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I Was on Instagram and I clicked a link that lead me to safari and when I got there a box kept coming up and saying a b c d e f g.... And so on. It won't let me delete the tab and I can't even use safari, can someone please help!!!!!??????
Quit Safari completely, clear Safari and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the Safari app icon. Tap the home button or anywhere above the task bar.
Go to Settings>Safari>Clear History, Cookies and Data.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?
You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??
-
I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?
How did the photos that you want to copy off get on the iPad ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer. -
I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite phone...in my child hood i love Apple products & till now......I can't activate it & for this reason i can't find the carrier network & can't make any call....pls help me...thanks for always support..My device ios is 7.1.2
& IMEI is : *****
Br-----------------------
Fazlur
<Personal Information Edited By Host>It's a security risk to post your IMEI number and I've asked the Hosts to remove it.
If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless. -
I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.
You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?
-
The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer. How do I change that? The apple id email is grayed out, so I cannot select it.
Delete and redownload those applications.
(120219) -
I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you
Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige
Maybe you are looking for
-
In our application, we have a lot of 'trees' in our data (parent/child relationships within a table). We rely heavily on 'connect by prior' to search through the trees, to find for example values that are defined in one of the parents ('inheritance')
-
Garbage collector does not work any way
when you unload some loaded swf file (Loaded with Loader class) it's Event Listeners continue their jobs is there anyway to solve this problem for example please made three files l1.fla , l2.fla , main.fla in l1 creat a MovieClip with instance name "
-
MDX - ABAP program variable to select the required month
Dear all, Please I would like to ask you about the following MDX issue. We have run the following MDX in SAP R/3 using the OLAP BAPI with successful results: SELECT [Measures].MEMBERS ON AXIS(0) , NON EMPTY [0SALESORG].[LEVEL01].MEMBERS [0DISTR_CHAN]
-
I cannot display image (read from oracle BLOB field) on browser?
I cannot display image (read from oracle BLOB field) on browser? Following is my code, someone can give me an advise? content.htm: <html> <h1>this is a test .</h1> <hr> <img src="showcontent.jsp"> </html>showcontent.jsp: <%@ page import="com.stsc.ut
-
ADD to a selection without deselecting existing selections?
I've searched for a while and I haven't found anything about this...I can't fathom that I'm the only one who's ever wanted to know this, but oh well... 1.) You've got a large clustered group of 100 small shapes, and you've selected the 2/3 of them on