I am trying to install itunes 11.0.3 and keep getting an error.

I am using Windows 7 and have a 64 bit OS. When I try to update software I get a vague error stating
"Errors occured during installation before iTunes could be configured.Your system has not been modified. To complete the installation, run the installer again.Click finish to exit the installer."
I have tried to run it several times and have rebooted my PC. I am having the same issue with iCloud and Quicktime.
Any help would be appreciated.

Is this the error your gettings?
If so, remove the installer, and redownload the itunes set-up installer
www.apple.com/itunes/download
Message was edited by: keeferaf

Similar Messages

  • Trying to install Itunes on windows 7 and keep getting this error message  could not access network location %APPDATA%\.

    please help

    With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
    You receive an "Error 1606" error message when you try to install or remove a Microsoft program

  • I'm trying to install iTunes on my pc and i get the error message "Service Apple Mobile Device Failed to Start.  Verify you have sufficient privileges to start system services

    I'm trying to install iTunes on my pc and I get the error message "Service Apple Mobile Device Failed to Start.  Verify you have sufficient privileges to start system services.
    What do I need to do to get iTunes to install?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I have windows 8, 64 bit.  I am trying to install ITunes 64 bit installer, but keep getting an error message that says a .DLL file is missing.  How can I fix this?

    After installing, whenever i try to open the application, it keeps popping up that some or the other .dll file is missing.
    When I install that particular .dll file and then again try to re open, it says that someother file is missing. It keeps
    coming all the time.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Recent bought an iMAC and i am trying to install Adobe cs5 master collection and keep getting this e

    Recent bought an iMAC and i am trying to install Adobe cs5 master collection and keep getting this error "consistency in the installer database. Please restart your computer and install again.  HELP

    Uninstall eachg and every bit Adobe (including older versions and minor tools), run the Creative Suite Cleaner Tool and install again. It's actually "Inconsistency", BTW...
    Mylenium

  • I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
    directly for serial number issues.

  • I uninstalled cs5 student version from my laptop and tried to install it on my desktop and I get these error.

    I uninstalled cs5 student version from my laptop and tried to install it on my desktop and I get this error.  This is a partial message.
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 58 error(s), 56 warning(s)
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    ----------- Payload: {635FED5B-2C6D-49BE-87E6-7A6FCD22BC5A} Microsoft_VC90_MFC_x86 1.0.0.0 -----------
    ERROR: Error 1935.An error occurred during the installation of assembly component {EC9C51A5-DD74-31C0-86E5-351D130E7097}. HRESULT: 0x80073712.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1935.An error occurred during the installation of assembly component {EC9C51A5-DD74-31C0-86E5-351D130E7097}. HRESULT: 0x80073712.
    ----------- Payload: {E5DD149F-8370-48F9-A32C-2E3DC776CFFB} AdobeJRE 1.6.0.0 -----------

    Hi Jeff,
    1)I purchased a license for Adobe Illustrator CC (and my expired trial version was for Adobe Illustrator CC)
    2) I am using Mac OSX, 10.7.5
    3) I just removed the previous installation with disable / remove Illustrator CC from the files programs

  • I am trying to re-install itunes on my PC and keep getting a Service Mobile Device (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services message.

    It worked fine up until a couple of days ago.  I uninstalled it and then reinstalled it and keep getting this error message.  What do I do?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I have repeatedly attempted to install Itunes on my laptop and keep receiving an error message.  What is causing this?

    I have repeatedly tried to install Itunes on  my laptop unsuccessfully.  I keep receiving an error message that reads: Runtime Errror R6304  An application attempt has been made to load the C runtime library incorrectly.  Please contact the application's  support team for information  Itunes was not  installed correctly, Please reinstall Itunes.  Error 7 (Windows error 1114)

    See the instructions of tt2 given in: https://discussions.apple.com/thread/5822086

  • HT1926 i am trying to download itunes 11.0 verision and am getting an error message that reads "feature ur trying to use is on a network resource that is unavailable" Can anybody help ?

    I am trying to download the new version of itunes 11.0 but am getting an error message  that reads "Feature your trying to use is on a network resource that is unavailable" Does anybody know how to resolve?

    Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • Trying to install Lightroom on a MacAir and I get an error message that an error occurred while evaluating JavaScript for the package

    Error occurred while evaluating JavaScript for the package.  Trying to install a Lightroom 5.6 download on an AirMac 10.9.4 OS.  Already installed on my Mac laptop.  Tried restating laptop but got the same error message

    Hi,
    Just wanted to say I found out the answer. I should have looked first to see if anyone else was having the same problem but I didn't. 

  • Itunes will not start and keep getting send error report to MS message

    I had a system crash and have re-built the sytem with XP Professional SP2 with all upto date patches. Symantec Norton Internet Security 2007.
    Downloaded the latest Itunes and Quicktime update on Monday evening and now every time I click on the Itunes icon, i get unable to start application and do you want to send an error report to Microsoft.
    I remember all the problems with the 6 to 7 upgrade and am hoping this is not a repeat.
    Any help appreciated.

    The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
    iTunes 7.0.2 FIX.........Have tried all 'fixes' suggested but iTunes STILL not opening
    1. Uninstall iTunes and Quicktime.
    2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
    3. Restart the computer.
    4. Install QUICKTIME ONLY
    5. THEN install iTunes......and IT WORKS.....Just remember to install Quicktime FIRST.

  • I'm updating iTunes on my PC and keep getting an error message.

    message says to contact adminitrator, unable to update itunes

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • I am trying to access netflix on apple tv and keep getting an error. Ideas?

    I am trying to watch a movie on netflix through apple tv and it keeps saying error try again.

    It could be related to the network.
    Check current speed using speedtest.net
    Go to istumbler (Mac) or netstumbler (PC) to get a report of your network, it will help to see if there's interference.
    On Apple TV, go to settings - general - network and make sure DNS is set to automatic.

Maybe you are looking for

  • BUG REPORT - Catch Up, ITV player

    I'm sure there must be some way to report bugs officially - but I don't know what it is. On a couple of occasions now, I have noticed that the most recent episode of Coronation Street (e.g. 7.30pm, Weds 26th Sept 2012) does not appear in the Catch Up

  • How do I import video from my dvd drive?

    I made a video in an older version of iMovie sometime ago. I would now like to import that video again into iMovie to update it. I cannot figure out how to add the clips to my events from the DVD drive. I can't believe there is not a simple way to do

  • Flex 4 - Error with DataGrid in Module

    Hey, I'm using Flex 4 final and am now getting the following error when loading a Module with a DataGrid inside: TypeError: Error #1009: Cannot access a property or method of a null object reference     at mx.styles::StyleProtoChain$/initProtoChainFo

  • Database creation in oracle 9i

    can any one tell me step of database creation in oracle 9i i try many times from 2 days through script because my DBCA is not open when i click it. DBCA created orcl during instalation but now it is not running. will i have to install it ? 1)i add db

  • File import size limit - increased for LR 3+?

    I've been using LR 1.4 for years, but lately I've been working on larger files and I'm getting "Files too large" to import... most recently with a 729.3 MB TIF. Has LR 3+ raised that limit?