I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

Similar Messages

I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

TS1436 when i try to burn a playlist using itunes i get this message at the top of itunes "disc recording not found" any solutions

when i try to burn a playlist using itunes i get this message at the top of itunes "disc recording not found" any solutions

Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Gateway T5254
iTunes 10.7.0.21
QuickTime not available
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002EA6FC09015990
Current user is an administrator.
The current local date and time is 2012-10-03 15:59:17.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA , NVIDIA GeForce 6100 nForce 405
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2a5aa2a020c605e8b6db3d153f68aa7e
The driver AFS.SYS is installed on the system.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.

TS1424 Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404). I have researched this on Google and I have not read of any solution to this. Please advise.

Him
Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)." I have researched this on Google and I have not read of any solution. Please advise.

Here you go: http://support.apple.com/kb/HT1923
There are three steps so make sure you follow all of them. They are:
remove iTunes and everthing related to it
verify everything is really removed
reinstall iTunes.

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

I just tried updating to iTunes 10.7 on my pc and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Any Ideas?

I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Iphone could not be restored.an unknown error occurred {1} iam getting this error when iam restoreing the i phone 4s please any one can hlep me

iphone could not be restored. an unknown error occurred (1). when iam restoring my i phone 4s iam getting this error message, can anyone please help me ....

That usually indicates a hardware failure. Make an appointment at the genius bar and have them look at it.

I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message: [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message: [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
Never had any issues before now... any ideas?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

Installing itunes and am getting an error 2 message that say apple application support not found

Am trying to install itunes on my home computer windows 7 and am getting an error message that says Apple Application Support not found, error 2. Have uninstalled and reinstalled twice and get same error message.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

When I start Firefox, I get an error message instead of my home page: Server not found Firefox ca

The error message is: Server not found
Firefox can't find the server at co108w.col108.mail.live.com.
If I then hit "Home" it goes to the home page. Changing the home page hasn't helped. Resetting Firefox hasn't helped. This just started today. Restarting the computer didn't help.
I'm using Firefox 18.0.2 and Windows 7.
Thanks.

Check for malware
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

I purchased and downloaded a movie and when I it backed up to my computer it changed something and now when I try to watch the movie I get an error message that says "The request URL was not found on this server.? What do I need to do to correct it?

I purchased a movie and downloaded it and when I conected my I Pod to my computer, now I get a message "The requested URL was not found on this server". What do I do to fix it?

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

I keep getting this window that pops up while surfing Drudge, File not found, Firefox can't find the file at /C:/Program Files/Mozilla Firefox/D èÎß&ÌªH¿MH¿%1BnàŽ–âPÕ"6´6-%06%1B%0FÜ- ¢Oóü&Ùß%03[Ò–‚Ø%%1C#%17E±MgÓ˜Û%04goS£‡Å-ovûU%08êïÇÔý„€ÙØ–!gäø½.

I keep getting this annoying window that pops up while surfing Drudge:
File not found
Firefox can't find the file at /C:/Program Files/Mozilla Firefox/D>èÎß&ÌªH¿MH¿%1BnàŽ–âPÕ”6´6—%06%1B%0FÜ… ¢Oóü&Ùß%03[Ò–‚Ø%%1C#%17E±MgÓ˜Û%04goS£‡Å…ovûU%08êïÇÔý„€®ÙØ–!gäø½.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
Do you have any idea how to get rid of this annoying pop-up? I searched for that file name on Google, but nothing came up.
This only started happening after the Scareware program, Open Cloud Security, infected my computer a few days ago. My wife got into my registry to remove Open Cloud, but now I am left with this annoying Firefox problem. I have to close the annoying window TWICE to get back to Drudge.
This happens 6 times per hour.
Thanks

Getting this error :NB: JAVA_HOME should point to a JDK not a JRE

HI All
I've installed jdk1.5.0_06 in windows enviroment.i've correctly set the java_home path for it.
Apart from it i've installed two servers one is Weblogic 9.1 and Tomcat 5.5 and NetBeans 5.5.1.
While running my project with the netbeans it tried to start the server. On starting the Tomcat server it showed me this error in the Tomcat log.
NB: JAVA_HOME should point to a JDK not a JRE
but while running Weblogic it worked smoothly. the java_home path has both the paths of jdk1.5 (installed separatly ) and the one which is bundeled with weblogic(jdk1.5)
Could anyone tell me the solution for the error.while running the project sseparatly is working fine. but i am not able to run it from NetBeans.

By why it is so that we bin folder was not selected,
because when i earlier installed weblogic then at
that time weblogic automatically made this entry
using its own internal jdk and the path was till bin.A JAVA_HOME directory should point to a directory containing all the java related stuff. The bin part is appended while executing javac or java command. Weblogic might be using the JAVA_HOME variable differently.

Getting this error message, what do I do? 'Could not initialize the application's security component.'

Rest of the error message: The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full.
I just downloaded the latest version, and tried to open the browser. Where do I find the profile directory and how do I know what a read/write restriction looks like?

Did you try to rename the file cert8.db (cert8.db.sav) in the profile folder and maybe secmode.db as well?
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox

I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

Similar Messages

Maybe you are looking for