I am trying to install solution manager 7.1

Hi,
I am trying to install solution manager 7.1
platforn O.S Windows X86_64 2008 server
              D B orcale 11.2
Install has got stuck in the phase 33 "install java engine"
when I check sapinst_dev.log it stopped updating any log after the step
TRACE      2011-07-06 09:19:12.984 [syxxcnode.cpp:454]
           CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/SDMKIT.2.log, ISyNode::CopyMoveMode_t 0x3)
           lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/SDMKIT.log to C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/SDMKIT.2.log
INFO       2011-07-06 09:19:12.984 [synxcpath.cpp:814]
           CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\SDMKIT.log.
INFO       2011-07-06 09:19:13.000
processing bar shows "Extracting pack/sdmrepository.sdc"
Has any one come across this issue....
thank you so much
Regards,
Jay

Hello,
The default parameters for the JVM are not adaquate for an X64 system, and seem to be for 32 bits systems.
This means when the J2ee folder is created in usr\sap...and the JVM is started with the default java parameters on an X64 system, it will fail. The installation guide should refer you to the JVM settings, but if you are using SAPJVM, then Note 1603093 has the required parameters.
As an example the maxheap needs to be set to 2048, but it will only be set to 1024.
In order to resolve, you need to find the Note for the Java parameter settings for your JVM, be it Oracle (Sun), IBM or SAP, run the configtool to modify them accordingly.
Then once this is done re-start the install, using the existing configuration file, it will advance rapidly to the point it failed, and then start he JVM successfully. Or you can start it in the SAPMMC and once you are satisfied it will start with the parameters, restart the install. This is a better method because
it is much faster if you make a mistake and it fails on a typo in a parmeter setting.
Unfortunately you cannot set the JVM paramters prior to the JVM being created, and it has just been created at the phase in which your install has failed.
Hope this insight gets you going again.
Regards,
Paul

Similar Messages

Getting this error when trying to install solution manager...Please help!!!

ERROR 2010-06-01 11:59:43.214 [synxccuren.cpp:78]
 CSyCurrentProcessEnvironmentImpl::setUser()
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (ntadmin, wdflbmd0360, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1015) in file (synxccuren.cpp).
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:408]
 handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2010-06-01 11:59:43.479
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2010-06-01 11:59:43.479
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-06-01 11:59:43.542 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP Solution Manager 7.0 EhP1 > Software Life-Cycle Options > Additional Preparation Options > Operating System Users and Groups( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/LM/USR. </body></html>
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2010-06-01 12:00:05.386 [sixxcstepexecute.cpp:1003]
An error occured and the user decided to stop.\n Current step "|NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment".

Hi, I am facing something like only.
I have windows 2008 Server 64 Bit/Oracle 11g 64 bit and trying to install SAP BI 7.0.
Please have a look at the log below:
WARNING[E] 2013-06-26 20:10:20.152
FSL-06002 Error 1722 (The RPC server is unavailable.
) in execution of a 'OpenSCManager' function, line (130), with parameter (ServicesActive).
WARNING[E] 2013-06-26 20:10:20.152
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2013-06-26 20:10:20.152
FCO-00011 The step setDefaults with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_getDBInfo|ind|ind|ind|ind|2|0|NW_getDBInfoGeneric|ind|ind|ind|ind|2|0|setDefaults was executed with status ERROR .

Error while installing Solution manager

Hi,
It is urgent Please.
I am trying to install Solution manager 4.0 on Linux and Maxdb.
But during Phase Configure UME i am getting below error.
ERROR 2007-12-17 16:48:16
 CJSlibModule::writeError_impl()
CJS-30059 J2EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile umconfigurator.log: '
java.lang.ClassNotFoundException: com.sap.security.tools.UMConfiguratorLoad
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-12-17 16:48:16
FCO-00011 The step runUMConfigurator with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|runUMConfigurator was executed with status ERROR .
Can anybody please give me the solution on this.
Vinnu.

1. Check the rights of the user with which you are installing.
2. Check if any firewall is running.
3. Check the JDK version, you should go with j2sdk1.4.2_09.
regards
tamilboy

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

DbSlErrorMsg rc = 20 error installing solution manager 3.2

what am i doing wrong?
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSEXC.log
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL0.log
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL1.log
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL2.log
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSRC.log
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDIC.log
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSPROT.log
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDOCU.log
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLEXC.log
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPCLUST.log
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLOAD.log
INFO       2007-10-23 00:41:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPUSER.log
ERROR      2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAP0000.log
THIS IS WHAT THE LOG SAYS
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\MGF\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log -stop_on_error
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
Thanks

hey Venkat
Im trying to install solution manager 3.2 with oracle 9i...
I successfully created the central instance.
when creating database instance i get that error. during the load phase..I installed nonunicode installation
central instance is running. could it be that I'm using wrong code page 1100?
I'm not sure what to do its been bugging me for past few days..
And also do you know if 10g is supported with solution manager 3.2? When i installed 10g it said "no database found on this host"
Thanks for your help
Message was edited by:
        anand patel

Installing Solution Manager 4 error

I am trying to installing Solution Manager 4 onto a server which has an existing installation of SMD on it already. The play was to install SM4 and then migrate SMD to it at a later time.
While running through the system information check (this runs after I have input the path to the java component DVD and the location of the JCE policy) an is returned "type of instance in cache is wrong".
This seems to be related to SMD, the sapinst_dev.log:
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow()
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow() found instance in cache.
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow() done
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow()
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow() found instance in cache.
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow() done
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow()
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
2006-05-10 16:45:00.953 NWInstance._fromRow() found instance in cache.
ERROR 2006-05-10 16:45:00 [iaxxinscbk.cpp:271]
 abortInstallation
CJS-00030 Assertion failed: in
function (theRow) {
 NW.trace("NWInstance._fromRow(", dump_properties(theRow), ")");
 var name = theRow.name;
 var type = theRow.type;
 var retval;
 var key = NWInstance._whereFromRow(theRow);
 var fromCache = NWInstance._cache[key];
 if (fromCache) {
 NW.trace("NWInstance._fromRow() found instance in cache.");
 retval = fromCache;
 ASSERT(arguments.callee, retval.getType() == type, "type of instance in cache is wrong");
Has anyone come across this, or have any suggestions on what might be happening.
Thanks,
David

Hello,
I know this is old, but I faced the same problem and the steps I did to resolve were:
1) Make sure there is nothing else under /usr/sap/<SID> and /sapmnt/<SID>
2) Stop SAPinst and remove sapinst_dir
3) Clean or remove /usr/sap/sapservices file
Good Luck!
Cleiton

Question for installing Solution Manager & ECC 5.0

Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lot

Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks.

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

Error during installing Solution Manager at step 18 of 25 (import ABAP)

During installing Solution Manager, I got following errors and can't compleate installing.
==========================
ERROR 2007-02-15 11:05:22
CJS-30022 Program 'Migration Monitor' exits with error code 2. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-02-15 11:05:22
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
==========================
and the import_monitor.java.log says,
========================
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Required system resources are missing or not available:
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP1' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP2' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP3' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP4' does not exist.
====================================
The folder
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP1 ,2 , 3 ,4 exists, and can be accessed. (In previouse steps, those folders are accessed, correctly)
Strictly speaking,
jlc-w1\DVD.image\ is mapped as drive z:
I also tried put InstallationExport\EXP1 , 2, 3 and 4 at local drive c:
However the result is same, I got same error.
Does anyone know this problem?
Please help me.

Thank you for the information,
I have tried with following condition.
I've copied image from DVD to
C:\EXP1
C:\EXP2
C:\EXP3
C:\EXP4
(C: is local drive)
Then compared all copied files in the local drive and DVD image. Verified all files are identical. also made all files and folder under those folder have R/W permission.
However I still get same error. ( I did this from fresh OS and new installation as well)
I used filemon.exe during installation to monitor file access. During other step of the installation, files under EXP1,2,3,4 were accessed successfully.

Can I install Solution Manager on Netweaver 04?

Hi,
I am very new to the Basis world. I'm trying to learn installations and figure out where SAP components can be installed.
I have just recently installed a Netweaver 04 environment with the SAP Abap instance (Basis 6.40). Is it possible to now install Solution Manager on it or is solution manager 3.2 only compatible with Web App server 6.20?
Any explanation as to Solution Manager installation from scratch will be helpful.
Thank you
Amina

hi amina
rite now solution manager and netweaver can be integrated with solution manager diagnostics there is procedure
the following link will help u to learn more about it
https://websmp201.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000634682&
note: award helpful answers
regards
janak mehta

Error on install Solution Manager : Jcmon(error 4). No space left on device

Hi
I am having a problem installing Solution Manager 7.0 EHP1- AIX 6.1 DB2 9.7
During the unpacking phase error:
FCO-00011 The step unpack with step key was executed with status ERROR (Last error Reported by the step: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall / IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR, "finished with return code 4. Output
<html> <head> </ head> <body> An error occurred while processing option EhP1 SAP Solution Manager 7.0> SAP Systems> IBM DB2 for Linux, UNIX, and Windows> Central System> Central System (Reported by the last step error: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64 / DBINDEP / SAPEXE.SAR, "finished with return code 4. Output:
Sapce: processing archive / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR (version 2.01)
x jcmon
Sapce: error writing to / usr / sap / SMG / SYS / exe / run / jcmon (error 4). No space left on device).
Note: I downloaded the newest sapinst but not resolved.
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1296039
compile time: 26 Dec 2011 02:46:25
Media used:
51041320 - DB2 9.7 - Client
51041317_1 DB2 9.7 - RDBMS
51040438 - Export
51040437 - Installation Master
51040439 - Java SW Comp
51040584 - Kernel
Filesystem GB blocks Free% Used Iused% Iused Mounted on
/ dev/hd2 5:00 49 709 2.76 45% 8% / usr
/ dev/fslv00 15:00 15:00 15 1% 1% / usr / sap / SMG
any idea ?

Hi,
The /usr/sap file system looks fine.
Could you also check the file space on the /tmp file system? This is usually less and SAPInst can fill this up very quickly.
Ideal to create a seperate SAPInst directory rather than use the default /tmp/sapinst_instdir.
Regards,
Srikishan

Problem installing SOLUTION MANAGER in db2

Dear consultans;
I have a problem installing solution manager in db2.
In phase 'Import ABAP' the sapinst shows the following message:
Execution of the command "/usr/sap/SOL/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
ERROR      2008-08-26 11:19:30.422
           CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.e
xe.log.
ERROR      2008-08-26 11:19:30.748 [sixxcstepexecute.cpp:951]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Cr
eateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnecti
on was executed with status ERROR ( Last error reported by the step :Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exi
ts with error code 2. For details see log file(s) R3load.exe.log.).
The file R3load.exe.log show the following..
(root)sidtsmp:/install/instalacion> more R3load.exe.log
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
And if I do the following sentence it's finished ok
sidtsmp:db2sol 6> db2 connect to SOL
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = DB2SOL
Local database alias   = SOL
(root)sidtsmp:/sapmnt/SOL/exe> su - db2sol
sidtsmp:db2sol 1> db2 connect to SOL user sapsol
Enter current password for sapsol:
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = SAPSOL
Local database alias   = SOL
I reboot the server and now the sentence finished wrong.
sidtsmp:db2sol 8> db2 connect to SOL user sapsol
Enter current password for sapsol:
SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001
sidtsmp:db2sol 9>
Any suggestion?
Best regards,
Julene

Hi Julene.
Just one suggestion really,....
post the question on the Solution Manager forum
Chrs, M

Error at step 42/45 while install Solution Manager 4.0

Hi SAP guru,
I'm install Solution Manager 4.0 on Windows 2003 R2 with Oracle10g
and JSDK 1_4_2_16, while facing step 42/45 (Configure System Landscape Directory). Its shown error below.
ERROR 2008-01-17 16:02:04
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-17 16:02:04
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
Any solution for this problem?
PS. I was ran sapinst.exr SAPINST_SKIP_ERROR=true on step 39 (Install Software Units) after set SDM mode = integrated.
Thanks in advance

Hi Snehal,
The log I paste above was too many days ago. Thus, I'm get a new one from Log Browser for you.
ERROR 2008-01-21 19:05:35
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
and this from sapinst_dev.log as your requested.
INFO 2008-01-21 19:05:35
 CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_16\bin\java.exe -classpath E:/usr/sap/SOL/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX ahosapso:50100 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
TYPE=A STATE=401 INFO_SHORT=Error connecting to http://ahosapso:50100/ctc/ConfigServlet?param=com.sap.ctc.util.SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,HOST=ahosapso,P4PORT=50104,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(66|31|151|231|117|153|233|51|218|54|). The provided user data might be incorrect or user might be locked. CONFIGURATION=
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
 CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP Solution Manager 4.0 Support Release 1 > SAP Systems > Oracle > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
Edited by: jitpanu sriudomwat on Jan 24, 2008 3:47 AM

Error installing Solution manager 7.0 EHP1

Hi All,
I am installing Solution manager 7.0 EHP1 on Windows server 2008 64 bit. I have downloaded the installation DVD's from service market place (Named: 51036441_part1, 51036441_part2 and 51036441_part3).
But i am getting error while giving the path for LABELASC. It is saying that Found the label SAP:WEBAS:7.01:SAPINST..WINDOWS_X64_64. but need the label SAP:UT_SOLMAN70:NW701...*
Please help
Regards
Akshay Korade

Dear Achsay,
u can download this below files in following link.
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewFilteredProducts-SingleVariationTypeFilter
j2sdk-1_4_2_17-windows-amd64.exe
+ u can download suitable jce policies.
Regards
kesavan

How to install Solution Manager 7.0 ehp 1 on Laptop

Dear Expert !
I have a laptop Sony Vio only support 32 bit, but I need install Solution Manager 7.0 EhP 1 on this laptop to test. So you can show me how to do that . I hope, you show me as soon as possible.
Thanks and Best Regards,
Tru Hang

Tru Hang,
Even when 32 bit Solution Manager was supported, it is very doubtful your laptop would have the required memory or diskspace to install and run the system. You can see the system requirements in the SAP installation guides.
Hope this information was helpful.
Regards,
Paul

I am trying to install solution manager 7.1

Similar Messages

Maybe you are looking for