I am trying to install vmware fusion and during the install it continues to ask for the admin password to install.
I am trying to install vmware fusion 5-1.0.2 on osx 10.8.2 and it just keeps asking for the admin passoword for the computer. I keep putting it in with no luck. I have installed other programs with no issues.
If yours is the only user account on the Mac, it will have Admin privileges by default, so just type your password. Provided the installer is legit (i.e., downloaded from VMWare's servers and not some shady place), it needs Admin privileges since it needs to add stuff in the innermost folders of the OS for virtualization to work.
If your user account does NOT have admin privileges, you will need to have someone who does install Fusion for you. No way around this.
Similar Messages
-
Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!
Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID. -
When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?
Hi SheilaStuhr,
The troubleshooting steps detailed below can help get you connected to your iPhone's personal hostpot.
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
If you're still experiencing issues, try the steps below.
Wi-Fi troubleshooting
If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try these steps:
Turn Personal Hotspot off.
Turn on Wi-Fi: Tap Settings > Wi-Fi.
Turn on Personal Hotspot.
If another device can't join your Wi-Fi network, make sure the Wi-Fi password is correct.
If the device can't see your Wi-Fi network, check your device name. Windows may not correctly show a device name that uses non-ASCII characters.
See how many devices are using your Personal Hotspot. Depending on your wireless carrier, the number of Wi-Fi connections may be limited to three devices at once.
If the other device still can't connect, turn Wi-Fi off and on for the device.
Make sure that your device can see other Wi-Fi networks.
Note: If you see "Unable to Join" or a timeout error when you try to connect a device using Wi-Fi, remain on the Personal Hotspot screen until the first device connects. After the device connects, you can leave the Personal Hotspot screen and use your iPhone normally. Your device will stop broadcasting Wi-Fi if you put it to sleep or if 90 seconds elapse and no connected devices use Wi-Fi. To share your Wi-Fi network again, tap Settings > Personal Hotspot.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
All my best,
Allen -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have restored my i phone 4 and trying to restore from the back, but it is asking for the password, but when I entered the Itunes password it is not accepting it, how can I restore the password?
Hello hskod,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting encrypted backups
http://support.apple.com/kb/TS5162
You can keep trying to restore the device from backup until you remember the password. If you're having trouble, try:
Leaving the password field blank
Your Apple ID password
Your computer account password, if you have one
Email passwords you may have used
Your Wi-Fi network password
Website passwords you may have used
A password for hard-disk encryption software, if you use it
Have a nice day,
Mario -
New update are listed on the app icon. When I click update all I'm prompted to enter password. When I do, the progress bars go away and nothing gets updated. Tried logging out, reset iPad, and nothing seems to work. Keeps asking me to enter password.
I've been having the same problem for days and just solved it. Tried going to Apple ID and had all the same problems you did in the second paragraph. I signed out with my current username on the ipad under settings--->store and signed back in with my oldest apple id and password. Now the apps don't ask for a password to upgrade. I too had a username that wasn't an email address and had to change to one that was at some point. That's what caused the problems. Hope this can work for you.
-
The update DVD dosn't ask for the kind of install
it's my first system upgrade, but i read a lot
now that i receaved the DVD once it start the installation it dosn't ask for the kind of install
archive/upgrade/flat
why? am i missing something?I did not see any install options either.
I was watching very carefully, or so I thought.
The process just went ahead, after the screen that asked which
drive was to get the install, and performed an Upgrade.
Took about 1 hour, 15 minutes and so far everything I've tried
works.
Hope this helps.
Jim -
I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email
If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..
-
Maverick install is asking for an admin password which I never set up to begin with.
Maverick is asking for an admin password which was never set in the beginning. I have tried all help suggestions to no avail Help
I got to the same problem, because I have'nt an idea about my administrator password.
So I did reboot with command + R, then open Terminal, then define an administrator Kennword, then restart with pull down menu.
Restarting and opening the user ...(Systemeinstellung;Benutzer) the new setted password works, it is, it can be used to unlock user administration. But willing to start Maverick.....it does not work.
So at this time no Maverick....
Has any one a clue about what has to be done? -
Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?
The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4
-
I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again. I can't uninstall as it isn't present in control panel. When I open properties it asks to locate the exe or the other options don't work the target is invalid
Hi sambanyc,
What version of Adobe Reader have you installed on your Mac?
Please try installing on a different Admin user account and check if that makes a difference.
Regards,
Rave -
2007 Intel Imac, installed a new Hdd. Started up with the install disc but it doesn't find my Hdd when asking for a destination volume to install the Mac OS. The Hdd is recognized in system profiler. Any ideas?
Welcome to Apple Support Communities
The hard drive is not formatted, and it must be formatted in "Mac OS Extended (Journaled)" in order to install OS X.
Close the OS X installer, and go to Utilities menu (on the menu bar) > Disk Utility. Then, format your hard drive in "Mac OS Extended (Journaled)" as Format > http://pondini.org/OSX/DU1.html Finally, close Disk Utility and install OS X -
ast computer i was able to make 3 profiles and run 3 windows. each time it asked for the profile when i wanted to start each window. how can i set that up again
last time some1 set it up for me. i would only have 1 shortcut on my desktop. everytime i clicked on it, it would ask me which profile i wanted. even if i had 1 or 2 of the others open it would still ask me which profile i wanted to open. i want to be able to do it that way again.
yes i already set up the 3 profiles. but once i open up the one profile, and click on the short cut to open another, it just opens a brwser window with the profile in use. so i could open 10 windows, its only 1 profile, the first profile i used.
and yes i have the box not checked -
I have a 2008 iMac which had Leopard initially and I have upgraded to each new OS without a hitch. I downloaded "Mavericks" and began the install, it asked me for my "Admin Password" which I have never ever used since I set the Mac up, I have it safely tucked away so entered it, it rejected it each time. Am sort of lost now, as if my "Admin P/W" does not work here can I go from here?
I have seen many others with this problem but so far most of the solutions seem to be for the "log in" or "User" password not the Admin one.
I am running Mountain Lion successfully.
I have my original disks as supplied and also a Snow Leopard install disk.
I have seen some info about fixing this via Lion Recovery partition which I must have due to using Mt Lion.
How can I repair this situation.
Thank you to all those who respond.Thanks for your reply.
I have visited both the sites you listed but it seems to me that the solutions mentioned are to fix the User or log in p/w's.They do not seem to refer to the admin one again.
I understand about it being just like other user accts but the fixes do not really refer to it only the above two.
I have no problem booting up my Mac, I do not use a log in p/w so my problem is with the Admin p/w that was set up back in 2008. This is what I need to reset etc.
I am quite confused over these pw's as to just what is what and I need to make sure I understand all before I get into deeper trouble following these links.
This Admin p/w that was set up has never been used and is the only p/w I have except for my Apple ID. All previous upgrades only required my user name log in which has no p/w set up.
I hope you can follow me here butI have read so much on this it is becoming very confusing about whcih p/w's are what. -
I'm borrowing a friend's iPod touch until I get another phone and I want to add some apps. I deleted all the apps that weren't needed and then I tried to add some of the apps that I need. I switched the Apple ID account on the iPod and the iCloud account to my own along with all the other apps (Facebook, Google+, Twitter, Instagram, Skype, mail, YouTube, etc.) When i go to the Apple app store and try and update or download a new app it still asks for the old password. How do I get it so when I try and download new stuff it asks for MY password?
It is showing updates because your machine is tied to the original purchase and will remain so until you wipe the drive.
As you purchased it used and the seller obviously did not do what he was supposed to do and that is erase the hard drive and reinstall the original system, you will run in to far more difficult problems when you need to reinstall for whatever reason. The new licensing requirements are that any mac is sold with the original OS - any OS or app obtained at the app store is NOT transferable and the buyer needs to purchase their own license. That means you will not be able to reinstall the OS.
At some point, you will need to try to get either the original install disks (from the seller or Apple) and wipe your drive and reinstall. Then you can download your own licensed copy of Mavericks and any apps you want.
Maybe you are looking for
-
Iphone 4 won't show up in Itunes update 11.1.5
Okay, so I just updated my Itunes to 11.1.5. My Apple TV shows up in devices, but my Iphone 4 won't. I want to downlaod my new music. I have tried reinstalling Itunes I have tried basically everything. PLEASE HELP ME!!!
-
I am loading a PNG using ImageIO.read(new File(IMG_LOC)); and storing the BufferedImage returned. Now I want to take that BufferedImage and modify the palette. The palette must first be read, analyzed, and then re-written. Basically, I am using the p
-
Several issues with Logic 10.1.1
Some problems I've encountered in LPX 10.1.1. 1. Recalling Aux Channels with saved Channel Strips. 2. Using an external controller assignments to control smart controls in Track Stacks. 3. Setting project tempo using Tap Tempo. 4. Track Automation ti
-
ID transports procedure not effective
Hi experts, I am facing an issue regarding PI transports and the way they are done. We are using CTS+ tool to move the packages through our PI landscape, and thus, system generates transport orders (XIDK...) that contain j2ee stuff (one order for ESR
-
Characteristics in PA Document
Dears, We have utilized the Customer Group4 (Field TVV4-KVGR4) and need to get it updated as characteristics in PA document. The field mapping is done correctly in the COPA settings. But still the Customer group4 is not getting updated in the PA docu