I am trying to install windows 8 on my macbook pro how do i do that with a usb?
My question is how do install windows 8 or 8.1 64 bit with a usb because i have a macbookbro so i can't insert a CD.
see here https://discussions.apple.com/thread/6101313?tstart=30
Similar Messages
-
I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?
Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer. -
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education. -
I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and i can't access mac or win 7 what should I do i cant format it because i dont have a backup
It's not that you can't format it because you have no backup, it's because you'll lose everything when you do. Lesson learned. Always have a backup.
-
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
please help
This is the Macbook Pro forum. You should try asking your Boot Camp related question in the Boot Camp forum where the Windows/Boot Camp gurus hang out.
https://discussions.apple.com/community/windows_software/boot_camp -
o.k. So, I've been tinkering with several "self help" fixes for several days now with no positive results. I'll explain my initial problems and then end with my most current situation. In hopes that someone out there will have a good suggestion or possibly remedy for the issues i'm facing
First, my problem started after my wife played a game on my macbook pro and the computer froze. She went into a panic and decided to shut down via power button. When computer restarted she got the blinking file/grey screen and that problem continued for a couple of days before I began using steps from various support topics from apple concerning the grey screen/blinking file folder.
Ultimately, yesterday I decided to erase my Macintosh HD file as one tip suggested. Following the brief online and on screen (via the process) tips that were there. Once that was completed I attempted to reinstall snow leopard (my most current version on hand) into the pc.
At first, I thought this would work. It looked promising. But, after several hours the installation screen returned with failure. I attempted to repeat. And, even repair drives during this try and re-try process.
Now, today, one of the drives.. "hitachi..." states that it's failing and is in red letters with no ability to repair via the disc utility screen. The Macintosh HD drive shows that it's o.k. But, this drive is listed under the HItachi drive so I think that's where a problem might lay.
So, I guess my question really revolves around.. What if anything can I do to get the hitachi drive back up? (short of taking it to a repair facility and replacing.)
And, how on earth can i get my OSX back up to I have a laptop again.
Operating on a macbook pro here. It's my lifeline. Otherwise, I am using a Windows desktop that i'm not that fond of. lol
I'm trying to bring this 2006 laptop back to life. Trying to avoid a rather expensive repair or the purchase of a new laptop. Also expensive...
Any help would be appreciated.Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point. -
When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 8, how can i fix this?
bootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine -
Can't install Windows 7 on my Macbook pro.
Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped spinning. And after a while, the installation guide said that Windows couldn't be installed. And I had to turn off my Mac.
Post here:
https://discussions.apple.com/community/windows_software -
I am trying to install windows 8 at my macbook air boot camp
I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed. -
how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0 -
Trying to install Windows 7 on my mac pro
Trying to install Windows 7 on my mac pro. I'm running 10.6, I have boot camp 3.04 and after I partition and install the disc (using 32bit) it restarts automatically and freezes on a black screen. I have updated my software so what should I do? Thanks.
A., Use 64-bit for sure. You have too much RAM and hardware and VRAM
B. Put Windows 7 Pro 64-bit SP1, you have a dual processor you need Pro.
C. A dedicated drive for Windows.
D. At least 50GB
E. most important, pull all drives out and leave in just the drive Windows will install onto. -
How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo
How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant -
Trouble installing Windows 8.1 on MacBook Pro Retina mid 2014
Hi everyone
I recently bought a MacBook Pro Retina (mid 2014, 15", 2.8GHz, 1TB SSD) and wanted to install Windows 8.1 on it via bootcamp.
I have an official .ISO package of Windows 8.1 (it's x64, I checked), got it from MS Dreamspark as a student, and a valid serial number for it, of course.
Burned the image on a 16gb flash drive via bootcamp and proceeded to install. When asked by windows installer which partition to install on, selected bootcamp and clicked 'format', as it was recommended to do in various instructions on the internet (as it wouldn't install without formatting, I tried). The installation went good and finished, but immedeatly after that the installer gave me a notification "Impossible to update computer loading configuration, installation cancelled" (maybe it's not exactly like that, translated as accurately as I could, I'm installing windows in Russian).
I tried it twice, each time re-burning the installation drive. Got the same error each time.
All the software (OS X, bootcamp, etc.) is up to date, the macbook shouldn't have any problems as it was bought just a few days ago.
How can I solve this problem?yes sorry if it ruin the ending of one of the youtube clips you will be witching if you have problems as how you install windows in bootcamp
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=install+windows+8.1+on+macbook+pro+retina&tbm=vid -
Problem install windows on mid 2010 MacBook Pro 13 with 10.9.1
I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1. Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.". So what is the problem and how can I work around it? I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO). Any help is appreciated.
I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1. Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.". So what is the problem and how can I work around it? I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO). Any help is appreciated.
Maybe you are looking for
-
Just updated to 10.4.11 - Clips keep on moving into iMovie trash
I've just applied some updates (OSX 10.4.11, Quicktime 7.3, iTunes 7.5, iPhoto 7.1.1) and now I'm having a very perplexing problem with my iMovie HD (6.0.3) files. Here's my workflow: -Cut out unwanted footage -Extract audio -Import multiple image fi
-
Error:java.lang.Double:method parseDouble(Ljava/lang/String;)D not found.
Hi , oracle apps version : 11.5.10.2 and database version 11.2.0.2. OS version Solaris Sparc 64 Bit. We were performing a cloing activity on a new server and now while opening forms we are getting the following error : error:java.lang.Double:method p
-
I'm getting constant error message when attempting to burn a DVD. "Device Error: Target device isn't suitable for use" The Burner is a LG DVD drive, and works well with other applications, however Premiere Elements 8.0 doesn't seem to like it. I'm ab
-
Dear Guys, Let me know implications on business when tax procudure changed from TAXINJ to TAXINN ans also how to do the configuration, send me some documents Regards: Tata Reddy
-
HT1491 I have purchase an upgrade that won't download or install
First I had Jigsaw Jubile (Free app) and enjoyed it so I upgraded to Jigsaw Jubile Gold M5 for $4.99 and I just can't get it to dowload or install.Helpplease.Thank you so much'