I am trying to launch my external hard drive through maxtor central access manager. It will not launch and I keep receiving a KERN_PROTECTION_FAILURE error. Through discussion threads, it sounds like it may be a disk utility, repair issue. Please advis
I navigated to disk utility and verified disk, which returned no errors.
I'm not sure what you mean when you say that you're "trying to launch" an external hard drive, but you don't need Maxtors software to mount it on the desktop. Is this a new drive? Have you formatted it using Disk Utility?
Similar Messages
-
My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
-
I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!
You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.
Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. -
when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD -
I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?
Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao. -
I have two iPhoto libraries: one on the hard drive, and one on an external hard drive. I cannot access the iPhoto library on the external hard drive. Yes, it is plugged in!
How are you trying to access the EHD library? Can you open it by launching iPhoto with the Option key held down and selecting the EHD library in the window that appears?
OT -
If I move my iTunes library to an external hard drive, can my MacBookPro access these files in iTunes or do I need to move them backto my MacBookPro to play music, watch movies, etc.???
Trying to alleviate some disc space on my Mac!!!Yes, it can. Launch iTunes with the Option key held down and navigate to that instance of the library.
(86939) -
I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?
Coastal,
Frank gave you the exact answer to your question.
However, I would like to ask if you are indeed asking the right question. Do you really want different libraries? The implications are that you have to "switch" libraries to see what's in the others, and so that your searches don't work across all of your pictures? If so, then you asked the right question. If not, you may be more interested in relocating your masters to multiple hard drives so your library gets smaller, instead of breaking up the library.
nathan -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?
The external drive must be connected to the Mac using either USB or FireWire
You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
Here's how:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive. -
I've copied my itunes library onto an external hard drive. Is there any way I can do this and delete songs from my PC without also deleting from the external drive? Already lost two songs!!! I just want a back up - using a work PC and don't want others accessing my songs. Hope someone can help. Thanks!
I see. To get a better idea of what is being stored where please download and run the script iTunesInfo which should output something like this:
I'm interested in the block of 4 results starting ITL location. If your profile name shows up somewhere replace it with <Name>. It is also worth checking under Edit > Preferences > Advanced to see where iTunes thinks your media is supposed to go. My script estimates the setting based on the location of the first media file it can actually find.
tt2 -
After backing up through time machine on external hard drive, how do you access that data?
I backed up my MacBook to an external hard drive through Time Machine. After it was all done and I reconnected the external hard drive to make sure that I could access everything that was backed up, I couldn't get into the data on the external hard drive because it said that it was backed up through Time Machine.
What does this mean? How to I access the data that is on my external hard drive?There are 2 options.
1) (The Suggested way) With the TM external drive connected Open The Time Machine App in Applications and you can browse what has been backed up.
2) Open Finder and select the drive name on the left then the Backups.backupsdb folder and in there is all your files from the backups you have made listed under your Machine Name and in that folder under the dates/times they were created -
Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?
Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended. -
I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
No se encontró el costo de uno o varios artículos
Hola, al tratar de crear una Entrega a partir de una Orden de Vta. me da el error "No se encontró el costo de uno o varios artículos" y me indica el código del artículo. Si voy a los datos maestros de ese artículo y checo la Lista de registros contab
-
Using Bootcamp for Windows XP Installation
Forgive the irony of asking this question on an Apple forum. I'm planning to use Bootcamp to install Windows XP on my MBP. I have a legitimate WinXP SP2 license currently installed on a desktop PC that I plan to decommission. How do I deauthorize the
-
No accounting document created (?) for price change MR21
Dear All, I'm facing a strange issue: 1. I changed the price of a material (MAP price control) in MR21. 2. After price change, on the Accounting view of material master both MAP shows the new value both stock value shows the proper value. So, it is O
-
Column for Marketing Attributes
Whenever I search for a business partner, i get a list of business partner below. I want a fucntionality where if a search a business partner by entering a business partner. In the result, i need a functionality where i all the marketing attributes a
-
Remove apple id from operation system
Can someone please support me with the following problem? It´s really a squint one. I´ve bought a MacBook Pro for my Dad (who is a real computer dummy). After receiving the MacBook I´ve installed Mavericks and updated this to Yosemite. Now here comes