I am trying to make a Calculator in LabVIEW. I can't able to display decimal point in the output display and i can't able enter floating point numbers? Please help me.
I am new to LabVIEW. Please provide the detailed information. Thanks in Advance.
First thing to check is the representation of the indicator. Right click on it and move the mouse to representation. If it's not eithe EXT, DBL, or SGL, then the indicator is set only for integers.
Similar Messages
-
My Ipad is stuck on the connect to iTunes screen, I have tried plugging into iTunes but it makes the necessary noise but the computer does not recognise it and nothing alters on the Ipad screen. Have tried various computers and leads and it still does not work. Have also tried the switching off, plugging in to computer and turning on again using the on button and then the home button but nothing works. This happened while I was downloading software update. Please help me.
I suggested several things to GeekyNerdGirl in her first post here. Take a look.
My iPad is in what seems like permanent restore mode after iOS 7.2 update?
It can take more than a few attempts before Recovery Mode will work and you have to follow the steps exactly. DFU mode is even harder to perform correctly beside of the 10 second hold. Don't stop trying. Eventually one of these methods could work for you. -
Greetings this evening, I just purchased an iphone 5s and want to transfer some of my itunes from my mac running 10.6.7 to my new iphone 5s.I downloaded version 11.1 from the itunes website,restarted my computer but it wont recoginize the new 11.1 version which it tells me I need to sync songs from mac to 5S.Even though I downloaded version11.1 it still says I'm running version 10? How can I get my itunes from my mac onto my new phone and have them in itunes on the phone? Love my music! Thank You !
You have to update to 10.6.8 first.
Then, if your machine qualifies, this explains how to get Mavericks:
http://www.apple.com/osx/
This explains whether your machine is capable of Mavericks installation:
http://support.apple.com/kb/HT5842 -
My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone
Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise
-
Hi, I am trying to convert my resume on pages to a word document. When i export the file to to make it a word document ie(resume.doc) it messes up my whole resume on websites and pulls up a bunch of random words. Please help!
What exactly is the problem?
Your description is so muddled I am having trouble working it out.
How does your exported .doc file mess up websites? In fact what does it have to do with websites?
Where, how and what are the random words turning up?
Peter -
When trying to make a purchase for a movie I get a security information required field then I select continue and it brings me back to original screen to purchase movie. Please help.
It's telling you to verify your billing information (credit card, address, security code), which needs to be done in iTunes via computer.
-
Hy i Upgrade my iPhone and now my mp4 Data are in the file Video and i can't make any Playlist with them! Any idea?
I'm having the same issue, i restored my phone to Factory settings, even tried restoring it to my backup, half of my music bought from itunes won't play on my iphone and i'm super annoyed, this only happened once i updated to ios 7.2 so i assume its another glitch to go with my imessages not sending, getting sick of this.
-
When trying to download Itunes this pops up " key not valid for use in specified state" what does this mean and how can I fix it? I am using a pc laptop if that makes any difference.
Try reading through this thread: key not valid for use in specified state. Possible solution involves moving the RSA folder. Rather than deleting it as aniwack suggested I'd try this:
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2 -
I have tried everything, even erasing content on my iPad but I am still being asked to submit credit card information for free apps. I am also being asked the same thing to update apps which I already have. Someone please help!!!!
See the following:
http://support.apple.com/kb/HT2534 -
Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account. Please help me and tell me what I am doing wrong. Thx
Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB -
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.
Send it as a PDF.
-
I made an in app purchase and the payment did not go through due to lack of funds. Now I am trying to change the payment option (credit card) but it is not accepting it.
Please help! thanks in advance.I am desperate right now. I'm not sure if I got myself into some real trouble since I got the in-app and it works fine, but the purchase did not show up. It usually asks ms if I want to pay 2.99 and I would press "yes," but this time it did not ask and I feel like I got this app without paying for it. please any advice!?
Maybe you are looking for
-
VMS, create directory and the chamber of secrets
Ok, here I am bumbling around in the dark. Here is the scenario I am developing an application using PL/SQL under the constraints of the SCT Banner web form system. The Banner function calls create the web page on the fly from data obtained with PL/S
-
Incomplete Control Deliveries add new table-field for Incompleteness Proced
Incompletion Control for Deliveries add a new table-field for Incompleteness Procedure G (Delivery header) Hello, I'm trying to add a new field for Incompleteness Procedure G (Delivery header), but when I try to customize the procedure G with new fi
-
While executing DWContext_Timeline_AddBehavior command in menus.xml, the following JavaScript error(s) occurred: The function addBehavior() is currently unavailable. It is a template based page and I cannot get the timeline to function to perform any
-
On final cut pro x I keep trying to export but get the -50 error (something about quicktime)
I've read the other threads and deleted all my render files, stopped background rendering, yet I still can't share my video. Any reason why I can't share?
-
Netbeans 5.0 Executable Jar Problem--One Solution
Hi all. This issue seems to constantly come up with all the Netbeans IDEs. I managed to solve the problem I was having so I felt obligated to post my solution since it can be mind-numbingly frustrating to deal with. This may not work for you, but it