I am trying to open a .xml file in FCP, when i try to import the file it says choose a translation document. Any ideas?, I am trying to open a .xml file in FCP, when i try to import the file it says choose a translation document. Any ideas?
I am trying to import a .xml file into FCP; it asks for a translation document file. Any ideas on how to proceed? Thanks
What kind of xml? What kind of xml?
Shane is right if it's an xml exported from finalcutpro but there are many other kinds/uses for xml, most of which will not import into fcp.
Similar Messages
-
Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
-
I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred. Try saving to disk first and then opening the file".
Then it shows as downloading failed.But if I click on it twice ,it opens up .
this has started happening since last week.Before this ,it never happened.
Please suggest what has gone wrong somewhere and how can I rectify it.Please install the following add-on to see if it helps.
https://addons.mozilla.org/en-US/firefox/addon/pdfjs/ -
I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols. What is going wrong?
You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.
-
when I have a pdf file open, I used to be able to click on "Bookmarks" tab on left side and allow me to click on each individual page and delete if I needed to. Now when I click on the Bookmarks tab, that section is empty. How can I get it to show each page again?
Hi chrismarks1,
I think you may be confusing bookmarks with thumbnails. If you click the Page Thumbnails icon (the one above the Bookmarks icon), then you can delete a page by clicking its thumbnail, and clicking the Delete Pages icon (the trashcan icon). Just make sure that you're viewing the PDF file in Acrobat (rather than Acrobat Reader), as you can't delete pages from Reader.
Best,
Sara -
i have the exact problem, only have 6 computers with indesign CC version 10.1.0.70, but 2 computers, is version 9, i try actualization no CC, but no success. i can´t use open file, em others computers, because problem version, i liked if all indesign had the same version.
http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359 -
I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?
you might need codecs on you pc. i find vlc player and codecs is perfect for music and videos.
-
I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.
How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality. -
I'm being blocked from my favorites on my iPad 2 with the following........... You are not authorized to open this file. What do I do?
I'm not sure whether you have tried the "usual" things:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Command+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
* "3-bar" menu button (or Tools menu) > Options > Advanced
* Firefox menu > Preferences > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* classic Tools menu > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference? -
When I try to import pictures from another catalog, I cannot access my RAW pictures. I can only seem them as non supported what do I do to import?
Sorry for the long delay. I have Windows 8.1 and using Lightroom 5.7 I have organized my unedited RAW format photos in files on my hard drive in folders in My documents/pictures. Once I edit them I move them to another folders on a separate drive and discard the rejects.
When trying to access my documents by selecting .File - Import from another catalog- my documents/ pictures; I see the folders, however when I select it, it says No items to match your search When using the drop down menu on the lower right I can only see the images if I click on "all files" and when I click on the image I want to import, it says "Lightroom cannot import this catalog; "The catalog does not appear to be a valid Lightroom catalog"
All of this happend when I loaded a Cannon Pro 100 printer plug-in. I tried to disable the plugin, but It is still happining and cannot access the images. -
I keep getting this message when i try to play a movie on my imac "2010.DvdRip.Xvid {1337x}-Noir.avi” can’t be opened. I'm using QuickTime Player version 10.0(118)
Hold on... advice to someone downloading from 1337x !!!
Until I saw your comment and googled the term, I had no idea that this was a "downloaded" file. I assumed the "1337x" reference was to dimensions/resolution and Noir referred to genre. (I.e., I use similar notations the differentiate files compressed for TV playback comparisons.) In any case, the advice is the same irrespective of the source.
er, isn't it illegal to download movies ?
Not necessarily. Thousands of movies are probably downloaded daily as legal purchases from such vendors as iTunes. Thousands more are available for free in the public domain, open source/community videos listings, and under Creative Commons Licensing. In short, there are many legal sources of downloadable content and you should not automatically jump to the conclusion that everyone is a crook. -
When I try to start Firefox, I get a message that it is already running, but not responding and that I should close it before trying to run another Firefox. But I cannot find a way to close Firefox program that is not running as far as I can see. I tried uninstalling and reinstalling Firefox, but that did not work. I've tried various other things, but no luck. I thought programs should stop when the computer is turned off, but that didn't work either.
How are you opening the Profile Manager?
*http://kb.mozillazine.org/Profile_Manager
Sounds that Firefox is still or already running.<br />
See:
*http://kb.mozillazine.org/Kill_application -
Problem: this mac is not reading an excell file after upgrading to yosemite. My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it. Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite... Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice. -
I have a QNAP NAS which is connected to my Mac Mini.
When turning on I see my folders as folders, although one folder (might be too big) is not present.
After my computer turns off in energy saving mode and after starting it again, some of the folders turned to "exec" (black tile with green letters). They are not accessible anymore.
On my Windows machine and via the QNAP filesystem they are stil accessible.
The folders I talk about are full of Camera RAW files and XML-files (belonging to the camera raw files) as well as jpg and tiff files.
Who can help me....Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again. -
I close the textedit programme , open Pages, click on the 09 pages file to be opened and the message "The document “7-09 receipts” could not be opened. TextEdit cannot open files in the “Pages document”
What's this??? How do I open the pages doc??? KalavatiYou have obviously not done what you think you have done.
You have tried to open a .pages document in TextEdit which can't read them.
If you are confused which program you are in look to the top left of the menu.
You can either drag the .pages file onto the Pages icon on the Dock, open it from within Pages' Open dialog, double click on it or right mouse click > open with.
Peter -
Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.
Luis
Good question - and one that a lot of (business) people would like solved!
Your question prompted me to do some research, and I found this workaround posted by Scott Grossberg:
His solution actually addresses a second problem too - how to attach a document when replying to an email message. In your case you may not need to consider the "reply" aspect - but if not right now, it'll come in useful someday!
I've pasted it verbatim - if it works for you (it does for me) then all credit goes to Scott for solving the problem. There's just one thing I'd add to his solution: you will probably want to rename the message, as by default Goodreader gives it the Subject line: Mail with GoodReader attachments.
THE GOODREADER OPTION
1. CREATE the document you want to send.
2. SAVE it to GoodReader (this will require you to buy and install the app).
3. Go to your email and OPEN the email thread to which you want to Reply and attach your file.
4. COMPOSE your Reply.
5. DOUBLE TAP the message.
6. TAP SELECT ALL. This will copy the entire email thread.
7. OPEN GOODREADER on the iPad and go to the file you want to send as part of your Reply.
8. At the bottom of the GoodReader screen you will see an EXPORT icon (it looks like a rectangle with an arrow pointing to the right).
9. TAP the Export button.
10. TAP EMAIL FILE. Depending on your needs, tap either SEND FILE “AS IS” or “FLATTEN ANNOTATIONS.” This will open a compose message screen with the chosen document already attached.
11. TAP in the body of the email screen. TAP PASTE. This will place your composed Reply and the prior email thread into the message.
12. ENTER the Recipients’ names in the TO: field of your message.
13. SEND your email Reply.
The modified version (= when composing a new message rather than a reply):
1 Make sure that the doc you want to attach is saved in GoodReader
2 In the message you are composing, double tap, select all, and then copy.
3 Open GoodReader and select the file you want to attach
4 Select the export button at the bottom of screen
5 Select e-mail file
6 Position cursor in body of the email message, tap and paste. You may want to delete the "sent from GoodReader" text that precedes the attachment.
7 Rename your message (as by default it will be Mail with GoodReader attachments)
8 Add the recipient's address in the To field.
Hope this helps! All thanks to Scott for this workaround.
Maybe you are looking for
-
Firefox is freezing in the middle of a browsing session. When I close Firefox, and try to re-start it, it will not open. I need to access Task Manager, where I find Firefox to still be running. Once I close Firefox in Task Manager, I can re-start Fir
-
Toad error ORA-01026: multiple buffers of size 4000 in the bind list
Hi All when iam running explain plan in Toad version 11.5.1.2 the below error coming, ORA-01026: multiple buffers of size > 4000 in the bind list i have checked the all possible solutions provided in forums but no luck I hav changed NLS_LANG paramete
-
Stopped Initial download for Bupa_Main in CRM in between
Hi Experts, We have a problem in CRM. The initial download for the object BUPA_MAIN was accidently started by one of collegues. The job ran for almost 24 hour adn was still running. The queues went as high as to 40000 entries & the outbound queues st
-
Hi... Adobe's Automatic Updater has been driving me crazy... have all the latest updates but it insists on updating them again and again and downloading a 350Mb plus file... so, a search on Google produced this site with simple instructions on how to
-
Disable downloading of cpub-Remote_Desktop-Remote_Desktop-CmsRdsh.rdp RDS 2012 R2
Hi, We have RDS installed 2012 R2. but in non IE like Firefox or Chrome , We want to disable or remove downloading of .rdp file "cpub-Remote_Desktop-Remote_Desktop-CmsRdsh.rdp" because users can save and use this file at any time without login to RDW