I am trying to project a film from an ipad mini with a vga cable to a projector.  The film played, but the ipad did not mirror what was being projected.  I am trying to be able to mirror the devices AND isolate the window so I can use different menus wit

Hello-
I am trying to project a film from an ipad mini with a vga cable to a projector.  When tested, the film played, but the ipad did not mirror what was being projected, it was a black screen.  I am trying to be able to mirror the devices AND figure out how isolate the window so I can use different menus with the film still playing.
Any one know an app or softward that i can use?
Thank you!
Christie

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved.  That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

Similar Messages

  • Just bought a macbook air and my contacts from my iPad have not synced what can  do ?

    just bought a macbook air and my contacts from my ipad have not synced. what can i do ?

    Using iCloud Glen ?
    If so, on your Mac open System Preferences > iCloud
    Select: Contacts
    Give iCloud a few minutes to sync the data.
    For the iPad, make sure Contacts is switched on. Tap Settings > iCloud

  • My iPad would not complete the back up to iCloud.  The solution re: resetting my iPad did not work.  Are there any other ideas?

    My iPad would not complete the back up to iCloud.  The suggestion re: resetting the iPad did not work.  Are there any other ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • I got a new PC; when trying to sync my iPad I downloaded iTunes onto the PC; got a message that my iPad did not have the newest version of iTunes, would I like to update my iPad; I clicked yes then; since then my iPad is stuck in restore and may lose all

    Tried to sync iPad to new PC; got message that iPad did not have most current iTunes and would I like to update; selected update; got an error message saying a file was corrupt; iPad stuck in restore mode; no pictures transferred to PC; Apple Store Tech said only solution is to restore factory settings to my iPad but this will cause me to lose hundreds of precious and irreplaceable photos and videos; HELP?

    You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.

  • I did not realize Ilife was already on the new mac, and installed I life from a disk. Now Iphoto has a  circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

    I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a  circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

    This sounds different than with my IOS devices, since I am able to see the photos even with a connection to the Internet.
    Do you mean without a connection to the internet? With a connection it's logical you would be able to see the PS.
    The following is from iCloud: Photo Stream FAQ
    Can photos be saved or downloaded from a shared photo stream?
    Yes. Once photos are shared, anyone who can view the shared photo stream can download and keep the photos permanently.
    On a device using iOS 6 or later, you can save photos to the Camera Roll. On a Mac, using iPhoto 9.4 or Aperture 3.4, you can save photos from the shared stream to your local Photo Library or any other location on your Mac. On a Windows PC, you can copy photos from a shared photo stream to any folder. On the web, photos can be downloaded directly to your computer from the detail view of each photo.
    This tells me that the image files are not on the HD unless the subscriber chooses to download them.

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

    The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

    I advise to reply to the one you want to reply to.
    You have had good information here. I will not repeat that here.
    I would like to add:
    you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
    Akamai is crap software needed or not, Huawei the same.
    It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
    The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
    You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
    Lex

  • HT4061 I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it!  What can I do to save them?

    I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it!  What can I do to save them?

    Swayzeone wrote:
    I just tried updating my iPhone 4GS
    No, sorry... did not happen becasue no such model exists.
    If the device is in recovery mode, any data on it is already lost. 
    The only options are:
    Restore the device to get it functional.
    Enjoy the paper weight.
    For what reason did you attempt to update the device without first ensuring that your data was safe, meaning backing up the device and copying important pictures/videos taken with the device to a computer?

  • I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • TS1538 red dot glowing on proximity sensor of my iphone 4 and it is dead. it is not connecting with itunes. tried hard reset it's not working as well. also followed iphone troubleshooting assistant but also it's not working. what am i supposed to do now?

    red dot glowing on proximity sensor of my iphone 4 and it is dead. it is not connecting with itunes. tried hard reset it's not working as well. also followed iphone troubleshooting assistant but also it's not working. what am i supposed to do now?

    Make an appointment at the Genius Bar at your local Apple Store or take the phone into an Authorized Apple Service provider.

  • Sup guys..i cannot open my owc mercury elite extended hard drive i tried to repair permisions but it sill did not work wat do i do

    sup guys..i cannot open my owc mercury elite extended hard drive i tried to repair permisions but it sill did not work wat do i do

    It's tough to help you without any information, such as how is it connected. Have you done some fundamentals like checking the cables, disconnecting and reconnecting, SMC resets and  PRAM resets? If not start looking at cables, don't forget to switch them out. If you're not familiar with the resets instructions are below and don't forget to reboot in Safe Mode.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I just upgraded from Express to Pro.  When I open a project in Finder and neither Express nor Pro are running, it always opens in Express.  "Open With ..." says Express is the default.  How can I make Pro the default instead?

    I just upgraded from Logic Express to Pro.  When I open a project in Finder and neither Express nor Pro are running, it always opens in Express. I now want projects to open in Pro.  "Open With ..." says Express is the default.  How can I make Pro the default instead?

    Well, when I've done things like that it always sems like a good idea to keep an application that you know the file will definitely open in...

  • Is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2

    is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2 and cant believe what a waste of money it is.

    The newest version of CS2 is CS5. And it was made very clear that these applications would not run in Lion. Not only by Apple, but on all sorts of communities and websites. It has been a long time coming - PowerPC apps were outdated six years ago. Lion does not support Rosetta, and therefore not PPC apps.
    you have to options. Go back to Snow Leopard or upgrade your software. (MS Office 2004 and older will not run either).
    Cheers

Maybe you are looking for