I am trying to record on MBA but the volume is not loud enough
Hello,
I'll try to break it down quickly. I have a 2011 11" MBA and I am using GarageBand.
I use the Rocksmith jack to usb cable to play guitar and record it too, so far so good, no problem.
So I wondered, can I make it work with a microphone? As I work on a electronic shop I had everything to test it on the latest 27" iMac. For the test I used a rocksmith cable, a jack 1/4 coupler, a male jack 1/4 to male XLR cable, and a shure PG48 microphone.
I just had to put the recording level higher and everything was working just fine, great volume, great quality, perfect. So I bought all those cable that I was missing.
Arrived at home, same cable, this time with the MBA 2011 and a Shure PG 58 instead. Same setting, and the volume is very low. I have to litteraly stick my mouth on the microphone to have a decent level of sound (and have to speak really loud too !). I've checked on the macbook setting, everything was to the maximum, tried with a Shure SM57 to see if it would work, same result.
What is the problem? Is it the soundcard? Or the microphone? (That'd be weird tho') Did I forgot anything? It's weird because the guitar works just fine...
If you can help me I'd be on happy dude !
Thank you
I´m using same config, MBA rocksmith cable and Mic powered by a (singleAA baterry) Ive tried recording in Quicktime (more or less noise, good volume), audacity(way too low volume) SoundtrackPro (same low volume), GARAGEBAND (lot better volume and very decent recording, great presets and much better export options!
when you listen your recording on garageband it will sound LOW volume, im using mac headphones almost at max vol, maybe it lowers the volume so there is no feedback,... BUT whe you export to file and open it on Soundtrack or quicktime VOALA! normal voice recording is hitting 0dbs, so that gives me chance to lower down to -12dbs after doing my edits.
Use GARAGEBAND to recrod voice, or any other intrument, works great with Rocksmith USB cable, mic does require use of AA battery.
Busting my head with this for hrs until I tried Garageband.
good luck.
Similar Messages
-
I have a VGA adapter that I hooked into my MBA, but the picture is not projecting. What button do I press to project the image?
If you want to mirror the MBA screen, Press Command F1
This will toogle between extended desktop mode and mirror mode.
Regards,
Captfred -
I am trying to get itunes radio, but the tab is not there in music tab?
i am trying to get itunes radio, but the tab is not there in music tab?
That feature isn't available in the UK yet.
tt2 -
hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?
It isn't supposed to pair with the MacBook. You can use WiFi to connect but not Bluetooth. You can setup a personal HotSpot on the iPhone and connect the MacBook, or setup the MacBook AirPort to create a network and attach the iPhone, and use the USB cable to connect the iPhone to the MacBook for syncing and backup purposes.
The communications are rather limited. -
We are trying to install elements 11 but the program will not run error 213:11
we are trying to install elements 11 but the program will not run error 213:11
http://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html
-
I am trying to download the FireFox software but the page does not give me a link to execute ....I see the area for the down load but when I put my curser on it it does nothing
Try this page - http://www.mozilla.com/en-US/firefox/all.html
-
i am trying to play music and videos but will not see the volume control unless i have head phones in also phone will not move off silent mode and wont turn up with the volume buttons
its not showing the headphone sign its showing ringer when i press the button but no volume i have tryed to restore it but didnot work
-
A recording that works but the lsmw does not
Hi,
I have created a recording of the process which successfully changes the collection specialist in the collections managemenet role in the BP transaction.
When I process data using this recording in lsmw the batch runs fine and tells me that all transactions processed successfully. However on checking the business partners none of the changes have in fact saved.
Running the batch in foreground flows exactly the same as performing the manual change with the exception that there is no success message at the botton of the screen after the save button is pressed.
Has anyone seen this behaviour before and know how to get the transactions to save correctly in SM35?
kind regards,
Ross GoodmanHi Rahul,
I have recorded transaction BP. I just noticed too that in fact the last transaction always saves to the database, but all transactions before that report as running fine in SM35 but in fact make no change. In lsmw when you look at the process log all the "BP nnnnn was changed" messages refer to the bp in the last transaction!!
Ross -
I have tried to load Profile Manager but the icon does not appear on the navigation bar
I have created a profile in Profile Manager but when I click on 'Start Firefox' there is no icon shown. I Firefox is closed and I click on the icon on my desktop to open it, before it opens I get the 'Firefox - Choose User Profile'.
See:
*https://developer.mozilla.org/en/Command_Line_Options
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager -
Burned Imovie on Dvd but the widescreen is not ' wide enough'
What went wrong? I made an imovie and when i burned it on a dvd and played this on een widescreen television, about one fifth on the left and one fifth of the right was not showed. So long title texts were not entirely visible.
My movie was filmed with a widescreen camera, on Imovie I could see everything perfectly, the television is a widescreen, so what went wrong?
Could you help me?I have to take in account "safe area" 5-10% and avoid of placing significant elements there.
-
I put my iPod on the dock station but the volume dose not play?
I put the volume on my iPod and when I put it on the docking station I hear no music I saw that the volume controller disapeared now I can't hear my music
Downgrading the iOS is not supported by Apple.
Go to the dock manufacturer's support site and se if they have any suggestion or if a firmware update is available for the dock
Sometimes this works:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have an imac 20 in. The old hard drive crapped out on me. i put a new harddrive in and am now trying to install linux. But the imac doesnt recognise any keyboards
Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.
-
I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.
Is it possible that the person who sent the message to your phone sent it to your phone # instead? Try sending a message to your phone via the email address and see if it shows up on the iPad.
-
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Macbook pro with Maverics, can't install Snow Leopard on a partition.
I have the latest Macbook Pro with Mavericks installed. I have partitioned the internal hard drive and wish to install snow leopard on the partition from Disk. It will not let me run the .app and gives me the following error. "You can't use this ve
-
Can no longer download without saving? AKA: C\Windows\Prefetch?
Hi, I'm not sure what happened, but the downloads options on here are screwy. A minute ago I went to the plugin manager site and saw I needed to update Flash and Shockwave. I went to do the Flash one and it went fine and everything, but out of curios
-
Will only print one page of four page document
I have an HP LaserJet M1212nf and it will only print the first page of a four page document. I tried to check the preview settings and inserted "pages 1 to 4" and print "all", but neither works. What to do?
-
Time/LEave approval in Business Package for Manager Self-Service 60.1
Hi all, Currently implementing ESS MSS on 4.7 system with EP 6.0 SP19. The BP we plan to use is Business Package for Manager Self-Service 60.1. My basic question is, we approve leave requests in BP for my SAP ERP (2004s) in the Universal worklist. Ho
-
Modified files not updating/syncing
I have CC installed on my work computer and my home computer. Yesterday at work I copied some of PSD files to my CC folder on my work computer in order to work on them at home last night. Got home - files synced perfectly. I opened them right from wh