I am trying to scan from my hp office jet 6600 to my chrome book. How do I find the app?

I am not able to scan anything to my computer.  The printer is an officejet 6600.  I have a chromebook.   Is there an app that I can download to my computer?

Hi,
There is no scanning software available for ChromeOS, however you can still get basic scan functionalit through the network via the WebScan interface.
Click the network ip on the printer and locate its IP address.
Type this IP into your web browser to access the EWS page.
Click on Webscan and scan using the web interface.
If Webscan is disabled, click on Settings > Adminiostrator settings and enable Webscan.
Go back to the Webscan tab which should be available from now on.
Another alternative is the HP Scan to Email app, available from the HP ePrint Center (Print Apps) or the HP Connected site (Printables) by searching for Scan to Email.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • HT3669 Can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro

    Hi there, I can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro. I've tried all of the tips I've found online but when I try to 'Enable Scan to Computer' it says that there is a communication error. Anyone got any tips for me?

    Hi,
    Both printer and computer seem to be on same network.
    Please download and run the following utility to troubleshoot on the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
    Also download and install the firmware update from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

    I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

    Its possible the App is not available in the Canadian store if the link doesn't work for you.
    https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8

  • I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610.

    I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610 using Adobe Acrobat Pro 11. I recently purchased the printer. I believe I ame using all of the defaults. How can I correct the problem?

    Hi,
    Both printer and computer seem to be on same network.
    Please download and run the following utility to troubleshoot on the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
    Also download and install the firmware update from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How can I scan documents with HP Office jet and airport

    I am unable to scan from my HP Office Jet L7680 with it hooked up to the iMac through the Time Capsule.  Any advice?

    Hello Joshuamac,
    Thanks for the post.  With this one, I've included a link below with some excellent information regarding the scan issue that you've described.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01625522&tmp_task=solveCate gory&cc=us&dlc=en&lang=en&lc=en&product=2512009
    I work for HP but my posts and replies are my own....Thank you!

  • TS3147 After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"

    After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"  This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.

    rjliii wrote:
    Solved problem with original Canon software.  When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
    You should still use Image Capture IMHO.  If it was my gear, that's what I would do.  No need to worry about software upgrades.

  • Trying to scan from hp officejet 150 mobile all in one to my computer

    trying to scan from hp officejet 150 mobile all in one to my computer. downloaded the full feature for my printer off hp website. push scan on printer and will not find program on my computer to scan to. help!!!

    Hi @Bryan1968,
    Welcome to the HP Forums!
    I understand that you are trying to scan with your HP Officejet 150 mobile to your Windows 7 computer. I am happy to help you with your scanning!
    First, I would recommend to make sure you have downloaded, and installed the full feature software and drivers, from this website, HP Officejet Full Feature Software and Driver. It is possble, you might have accidentally installed the basic driver instead.
    Then according to your printer's user guide, the scanning functionality will only with a USB cable connection from the printer to the computer. Please see page 43 of your printer's User Guide.  
    I would also visit this guide, How to Scan: Windows 7, as it will give you some alternate methods of scanning, even without HP software.
    Hope this information is helpful, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I have been trying to get my iPhone to sync with a new computer.  As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone.  How do I get the apps on the old one to the iPhone and then the new c

    I have been trying to get my iPhone to sync with a new computer.  As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone.  How do I get the apps on the old one to the iPhone and then the new computer?

    You don't. Backup your itunes library on the old computer and move it to the new computer.

  • After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only. "

    After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • I'm trying to install software from Yamaha keyboards to connect my keyboard to my computer. I insert the CD and nothing happens. Yamaha told me to "find your CD drive" and open the software. How do I find the CD drive?

    I'm trying to install software from Yamaha keyboards to connect my keyboard to my computer. I insert the CD and nothing happens. Yamaha told me to "find your CD drive" and open the software. How do I find the CD drive?

    When you insert a CD/DVD in the optical drive, does an icon appear on the desktop?  If not open Finder Preferences and check the appropriate box(s).
    Ciao.

  • My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

  • I am trying to recover from a hard-drive crash & need to reinstall photoshop.  How do I do that?

    I am trying to recover from a hard-drive crash & need to reinstall photoshop.  How do I do that?

    What version of PS?  If it's CC, just reinstall the CC application manager then PS and sign in.  For an earlier version you will need to call Abobe to have you S/N reset.

  • Hi guys, trying to transfer my itunes from my old netbook to my macbook pro via ethernet. where can i find the old pc network address?

    hi guys, trying to transfer my itunes from my old netbook to my macbook pro via ethernet. where can i find the old pc network address?

    I can't see any reason that you would need it... Just let it create it's own connection.
    ADD:
    https://discussions.apple.com/message/11389300#11389300
    https://discussions.apple.com/message/12379324#12379324

  • I tried to instal 10.8.3 to my MBP and it crashed. I then tried to restore from Time machine but when it is about 50% through a message comes up "the files cannot be restored"

    I tried to instal 10.8.3 to my MBP and it crashed. I then tried to restore from Time machine but when it is about 50% through a message comes up "the files cannot be restored" Can anyone help me to get out of this mess?

    Back up all data.
    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • I just replace my modume and am trying to print on my HP office jet pro printer which I share with a PC computer. It worked before but I can not get it to print. My MacBook says it is connected to the printer,but then it says it is idle. What should I do?

    We just had our modume replace and I am now trying to print on my HP Office Jet Pro

    Hello mariamac80,
    It sounds like you cannot print from your network printer on your MacBook. Printer issues can be a but tough to nail down, but I would recommend trying the troubleshooting in this article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for

  • Requisitions for sale order stock

    Requisitions for sale order stock that are generated directly from the sales order are not passed to SRM but requisitions that are created manually for sales order stock are passed to SRM. Why is the sourcing of a requisition for sales order stock wh

  • [SOLVED] No Sound - ALSA. Soundcard detected however

    The new version of Alsa (1.0.20) supports my new sound card- the Asus Xonar Essence STX. I installed this version like it says on the wiki page http://www.alsa-project.org/main/index. … e-virtuoso (compiled from source) I have no sound now. In alsami

  • Abap Proxy Sender Configuration

    In my test system, (XI 7.0) Client 001 : XI (Integration Engine) Client 500 : Business System (Web AS ABAP) In client 500, I send a message to XI using ABAP Proxy. During the execution Logon Popup message appears and ask me user id and password for c

  • Why is my Mac having problems handling ProTools?

    Hello, I had a Mac-Mini built last year with their available I7 processor and I have installed 16gb of RAM and installed an Samsung Evo-Pro 840 SSD. The unit works very smoothly with noticeable differences with the upgrades. This was built for audio

  • The pictures i just dumped into iPhoto are HUGE!

    Hi!  I just shot pictures of a very important soccer championship.  I came home, plugged camera in, opened iPhoto (which used to open automatically) and imported all pictures from camera.  I chose 'delete originals from camera.' Then I went to Picasa