I am trying to send a friend a group email list from Contact. When it arrives there is only one contact in it. There should be 30! Any ideas?
I am trying to send a friend a group email list from Contact. When it arrives there is only one contact in it. There should be 30! Any ideas?
The procedure for exporting a group is to right-click (or Control-click) on the group in Contacts and select Export Group vCard, then email the resulting file to your friend. Is that what you're doing? If not, give that a try. You can confirm the contents of the file by doing a Quick Look on the file.
Hope this helps.
Similar Messages
-
Regarding Pages: I was writing using the app Pages when I left the page I was writting on but now I can't access it at all. I have tried to send the document to my email, I've tried to make a copy but nothing seems to work. The document still exists and I can see my writting as I can with all other documents but I can't open that page.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect the iPad to your computer and try to get the document via File sharing
- Try getting the document from iCloud.com if you are using iCloud -
I am trying to send a photo in an email and the file is huge. I remember something about reducing the size of the file but of course can't remember how.
Use a utility such as Graphic Converter to change the image to a jpeg using options to reduce the size of the converted image.
-
How do I populate the address book when trying to send a photo(s) by email?
How do I populate the address book when trying to send a photo(s) by email?
Click the Edit Contacts button, the silhouette, in the email attachments panel to bring up the contact book and enter the addresses there. In the contact book, click the new contact button to start entering the information.
-
Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network
Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario -
I am trying to help my friend to enable dictation for ipad mini, when go to setting-general-keyboard-enable dictation is not in her ipad mini, why? It is on my ipad mini. The speaker is not there when she open the keyboard on her ipad mini. She wants to speak in Notes instead writing every word. Can any one help? Thanks
Try turning Siri "On".
Setting>General>Siri>On -
I keep trying to send emails and it says its rejected by the server because it doesn't allow relaying... Any ideas how to fix?
There is something else that can cause this issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
Am trying to send an e mail with an attachment from i works. I can't find the document I wrote. Where is it?
emmazell33 wrote:
Am trying to send an e mail with an attachment from i works. I can't find the document I wrote. Where is it?
Wherever you saved it. Likely, Documents folder. -
I have a friend who switched from iPhone to Samsung and I am only one that has to turn off iMessage to send a text! I have deleted her then readded and nothing seems to work and she has turned off iMessage on her other apple devices. Is there a solution!
I have completely deleted twice! Deleted from iCloud contacts and windows contacts! Nothing has changed! Thanks for your idea!
-
I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.
You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.
-
I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?
Rentals can only play on one device/computer at a time. Have you tried to play on the computer and still have that window open?
Have you transferred the rental to iPod/iPhone or iPad to watch?
If it won't play anywhere contact iTunes support at:
expresslane.apple.com
AC -
After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting ro the repair partition and repairs permissions/drive/verify , with no problems. Tried reseting PVRAM(or whateverit called). Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas? Can still bootcamp into windows.
Thank youbhadotia wrote:Anyway's the file downloaded from dell to update the partition for Studio 1555 is corrupted (checksums don't match). My partition still doesn't boot. I'm working to fix this and will update my post when I'm done.
The file seems to create the CD/DVD/Image and USB just fine. So I used this only to create a CD image which I then wrote on a blank CD which seems to work fine. Also, I played around a bit and had some partial success in booting the partition. I've updated my original opening post with the new findings.
Whew!! what a waste of time! Never want to do all of this again .
Last edited by bhadotia (2012-03-03 00:05:22) -
I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?
I have not done a factory reset, I was trying to find out if I had some setting configured wrong first. I figured I'd just make things worse if went through a reset!
Here is a couple of screen shots: -
My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?
I was having the same problem, I backed up my phone and then updated to iOS 5 and then it kept telling me it could not restore from my backup as it had failed. After reading a bunch of forums and posts and trying everything, I did manage to get it to work. I had tried the Time zone, creating a new computer user account, disabling anti-virus, etc.
It took a combination of things, one of which was disabling the anti-virus completely and copying the contents of the backup folder to my desktop and then deleting everything in the backup folder. Then I rebooted the PC, entirely disabled the anti-virus, copied the one backup I wanted to restore from the desktop to the backup folder and then trying to restore. Low and behold the phone said restoring from backup and I am back in business, so when in doubt, trying combining some of the fixes together.
Maybe you are looking for
-
Need to find out what has been modified to running-config
Hello, When I enter the "reload" command, Cisco ASA 5510 asks me a question: System config has been modified Save? [Y]es/[N]o: All I did was issuing a few "show" commands before the "reload" command. I definitely need to find out what has been modifi
-
Hi, i'm calling the RFM ECATT_EXECUTE from a C# Command Line Application with the .NET Connector. The call itself run's successfully, but when i look at the ECatt log, the test is marked as failed. The Testscript is rather simple, it tests the ME21N
-
Cache Event polling S_NQ_EPT in Cluster Env.
Hi, How to use event polling mechanism in Clustered Env to purge cache ? It works fine in non - clustered env. I'm getting errors - 2009-12-16 15:40:45 [55003] The cache polling SELECT query failed for table S_NQ_EPT. 2009-12-16 15:40:45 [nQSError: 1
-
My macbook screen suddenly is all jittery!?
All of a sudden the screen on my macbbook is going crazy! Repeated images and horizontal lines. It makes the computer unusable. However, when I restart the grey apple screen come up no problem. Then back to the same old problem. Soooo I'm inclined to
-
I tried to open the installer and it says can't install this app. I have a i5 quad core Imac with cs5.5 on it