I am trying to send a large file and it takes over 15 hours and still doesnt send the complete file

I am sending a large file over the internet to Graphistudio. When i try and send the file it tells me it is going to take 19 hours. when i have sent these files in the past it has never taken this long. when it does finish sending it doesnt even send all the file and bits are missing.

What method or app are you using to send the "large" file with? Emails, for instance are often limited to 35 or 40 MB's maximum size by the ISP provider. You would need to use an FTP setup to send a larger file. And what is the size of the file in MB's or GB's? You might check out the following free FTP Apps for Mac:
http://mac.appstorm.net/roundups/internet-roundup/top-7-free-ftp-clients-for-mac /

Similar Messages

Trying to transfer a large file using new ipod touch.

I am trying to transfer a large file (17gigs)using my new ipod touch. I got a new laptop and i am trying to get some things on it. I was able to do this last time with my old ipod classic. It would let me copy/paste the file or drag it. But with the ipod touch i can not do either of those. Any help will be appreciated. Thank you very much.
Message was edited by: usagisailormoon
Message was edited by: usagisailormoon

ah really. ok thank you very much.

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?

What happens if you choose this option?

Trying to send the alv's information to excel file

Hello iam trying to send the alv's information, when i execute my program sent an alv with that information that i have selected and then i would like to sent that information that the alv containe to an excel file, that why i press the button located top of alv, this sent an excel screen but this screen appears plain,without information but doesn't send an error.
thanks a lot for you help

Mr Heilman:
I am really sorry for to many question and this troubles
this is the segment fo code that i am using:
*& Report ZREPORTE_PA9011
REPORT zreporte_pa9011 NO STANDARD PAGE HEADING MESSAGE-ID 02.
*Tables declaration
TABLES pa9011.
TYPES BEGIN OF prueba.
        INCLUDE STRUCTURE pa9011.
TYPES END OF prueba.
DATA prueba TYPE STANDARD TABLE OF prueba WITH HEADER LINE.
*declaracion de las variables para el alv
TYPE-POOLS: slis.
DATA: repname LIKE sy-repid,          "variables alv
      heading TYPE slis_t_listheader,
      layout   TYPE slis_layout_alv,
      fieldtab TYPE slis_t_fieldcat_alv.
*Sections parameters
SELECTION-SCREEN: BEGIN OF BLOCK bi WITH FRAME TITLE text-001.
SELECT-OPTIONS subtipo FOR pa9011-subty.
PARAMETER:     pbegda LIKE pa9011-begda.
SELECTION-SCREEN: END OF BLOCK bi.
START-OF-SELECTION.
repname = sy-repid.
PERFORM selecciona_datos.
PERFORM transfer_to_alv.
*&      Form selecciona_datos
      text
FORM selecciona_datos.
REFRESH prueba.
SELECT * INTO CORRESPONDING FIELDS OF TABLE prueba FROM pa9011
WHERE subty IN subtipo
AND begda GT pbegda.
IF sy-subrc NE 0.
    MESSAGE e000 WITH 'Aun no existen datos cargados'.
ENDIF.
ENDFORM.                    "selecciona_datos
*&      Form transfer_to_alv
send the information from prueba into alv
FORM transfer_to_alv.
PERFORM initialize_fieldcat USING fieldtab[].
PERFORM build_layouts USING layout.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
       i_callback_program      = repname
     i_callback_user_command = 'AT_USER_COMMAND'
      i_callback_top_of_page = 'BUILD_COMMENT'
      i_structure_name        =
       is_layout               = layout
       it_fieldcat             = fieldtab[]
       i_default               = 'X'
     i_save                  = g_save
     is_variant              = g_variant
     TABLES
       t_outtab                = PRUEBA
     EXCEPTIONS
       program_error           = 1
       OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "transfer_to_alv
*&      Form initialize_fieldcat
      text
     -->P_FIELDTAB text
FORM initialize_fieldcat USING p_fieldtab TYPE slis_t_fieldcat_alv.
DATA: l_fieldcat TYPE slis_fieldcat_alv.
REFRESH p_fieldtab.
CLEAR l_fieldcat.
l_fieldcat-tabname = 'PRUEBA'.
l_fieldcat-ref_tabname = 'PA9011'.
l_fieldcat-sp_group = 'A'.
l_fieldcat-fieldname = 'SUBTY'.
l_fieldcat-seltext_m = text-t01.
l_fieldcat-col_pos = 1.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'BEGDA'.
l_fieldcat-seltext_m = text-t02.
l_fieldcat-col_pos = 2.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'ENDDA'.
l_fieldcat-seltext_m = text-t03.
l_fieldcat-col_pos = 3.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'AEDTM'.
l_fieldcat-seltext_m = text-t04.
l_fieldcat-col_pos = 4.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'UNAME'.
l_fieldcat-seltext_m = text-t05.
l_fieldcat-col_pos = 5.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'PREAS'.
l_fieldcat-seltext_m = text-t06.
l_fieldcat-col_pos = 6.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'ZDESCRSEGURO'.
l_fieldcat-seltext_m = text-t07.
l_fieldcat-col_pos = 7.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'ZASEGURADORA'.
l_fieldcat-seltext_m = text-t08.
l_fieldcat-col_pos = 8.
APPEND l_fieldcat TO p_fieldtab.
l_fieldcat-fieldname = 'ZCOBERTURA'.
l_fieldcat-seltext_m = text-t09.
l_fieldcat-col_pos = 9.
APPEND l_fieldcat TO p_fieldtab.
ENDFORM.                    "initialize_fieldcat
*&      Form build_layouts
      text
FORM build_layouts USING p_layout TYPE slis_layout_alv.
p_layout-colwidth_optimize = 'X'.
p_layout-zebra = 'X'.
p_layout-f2code = '&ETA'.
p_layout-detail_popup = 'X'.
ENDFORM.                    "build_layouts
*&      Form build_comment
      text
FORM build_comment.
DATA: hline TYPE slis_listheader,
        text(60) TYPE c.
REFRESH heading.
CLEAR: hline, text.
hline-typ = 'H'.
text = text-h01.
hline-info = text.
APPEND hline TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = heading.
ENDFORM.                    "build_comment

Regarding Pages: I can't access the document I was writting on at all. I have tried to send the document to my email, I've tried to make a copy but nothing seems to work, it just shows up blank.

Regarding Pages: I was writing using the app Pages when I left the page I was writting on but now I can't access it at all. I have tried to send the document to my email, I've tried to make a copy but nothing seems to work. The document still exists and I can see my writting as I can with all other documents but I can't open that page.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect the iPad to your computer and try to get the document via File sharing
- Try getting the document from iCloud.com if you are using iCloud

I'm trying to set up a iTunes allowance account for my 11 year old daughter, I set up the account but put in the wrong email address, now it's trying to send the verification email to an old addy I no longer have access to. Help.

I'm trying to set up a iTunes allowance account for my 11 year old daughter, I set up the account but put in the wrong email address, now it's trying to send the verification email to an old addy I no longer have access to. Help.
I've tried looking at my own itunes account but I cannot seem to find the allowance account, it says I currently have zero allowance accounts.
All I want to do is change the assigned email address.

Who is the email provider? Not all accounts can be set up as POP3

Trying to move my iTunes Music and other media from the main drive on my pc to an external hard drive but iTunes is not recognizing the new file location? Ideas?

Trying to move my iTunes Music and other media from the main drive on my pc to an external hard drive but iTunes is not recognizing the new file location? Ideas?

Hello there, Underwriter.
The following Knowledge Base article provides in-depth instructions on how to migrate your content to an external drive:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Particularly of note for your situation:
External drive
This option requires more work than Home Sharing, but it creates a backup of your iTunes library on the external drive in addition to moving your content.
Notes before you start:
You can use most iPods as an external drive.
Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Because of this, you can't use a Mac-formatted iPod or external drive to move your music to a Windows PC. See iPod: How to determine iPod's hard disk format if you're not sure how your iPod is formatted.
Mac OS X can read Windows-formatted iPods and drives. This means there are many ways to migrate your information from your old Windows-based PC to your new Mac.
Mac OS X: To be sure external drives appear on your desktop, choose Preferences from the Finder menu. Be sure the options for "External disks" and "Hard disks" are enabled.
Part 1: Locating and consolidating the iTunes Media folder
Part 2: Copy iTunes folder from the old computer:
Part 3: Get iTunes ready on your new computer
Part 4: Back up any music that's already on your new computer
Part 5: Copy music to your new computer
Part 6: Add preexisting music that was on the new computer back into the library
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

Im am trying to send the reset information for my apple security question to my email, they are not be received and it says it is sending it to a email that starts with c

Im am trying to send the reset information for my apple security question to my email, they are not be received and it says it is sending it to a email that starts with c

That's not a good sign if it said it was going to send it to an email address you've never heard of. Contact iTunes Support and let them know this: http://apple.com/support/itunes/contact/

My iphone 4 says outgoing whenever i send an sms to multiple recipients. does this mean it's still trying to send the message?

my iphone 4 says outgoing whenever i send an sms to multiple recipients. does this mean it's still trying to send the message?

Perhaps someone from Apple could reply to this rather than leaving it unanswered?

How do I create a submit button for my form? I would like it to send the completed PDF to an email address

Hi everyone,
I recently upgraded to Adobe XI and I can't find a "submit by email" button for my form. I created a button and tried to set up some actions but, I can only get the button to direct the user to a URL. How do I make it send the completed PDF to our designated company email address? I'm not too familiar with JAVASCRIPTS so I haven't tried that plus I heard it may not work with users with adobe reader.
Any help would be appreciated.
Thanks,
Matt

Thanks for the input. I think you might have a different version of LiveCycle than the copy I have since it looks a little different. However, I found the answer in Adobe help. I had to type "mailto:" before the email address to indicate it's an email and not a URL. See below.
To collect form data as attachments to email, type mailto: followed by the email address. For example, mailto:[email protected]

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

TS1372 Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks

Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks

Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015

Istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

Hi
So these are EXS24 Sampler Instruments?
If yes... the .exs Instrument files need to go in
Library:Application Support:Logic:Sampler Instruments
Or
<User>:Library:Application Support:Logic:Sampler Instruments
CCT

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not curre

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not currently authorized for use with your Adobe ID." It does it with every single book. I've never had this problem before. I've tried everything! Please help.

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

I am trying to send a large file and it takes over 15 hours and still doesnt send the complete file

Similar Messages

Maybe you are looking for