I am trying to send a microsoft document that it gives me an error that it is already in use

I have tried to send a document via email, it had worked lots before. But now it states that it is being used by another file or folder when none are opened. I am wondering what I may have changed that this is occurring. The document I am sending is a sending is an original microsoft template?

Reboot, try it again.

Similar Messages

I'm trying to send a pages document as an email attachment to pc users. They can't access the document.

I'm trying to send a pages document as an email attachment to pc users. They can't access the document. When I try go to the "file" menu, there is no "save as" option.

Hi Shelly,
Command-P (Print)
In the Print dialogue, click the PDF button at lower left, choose Mail PDF
The result should be a new email document with the pdf file attached.
Address and send.
The procedure applies to any document which may be printed, not just Pages documents.
Regards,
Barry

I need a Microsoft document that says "sqlservr.exe" can register setspn (Service Principal Name)

On all of my SQL Server instances, I can find SQL server error logs that have the same 3 entries below, so while I already know it can, I need a Microsoft document that says "sqlservr.exe" can so I can convince the network guys to grant the service
account for SQL "Write servicePrincipalName: Allow" in AD.
63 2014-06-26 20:24:02.980 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:1433
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
61 2014-06-26 20:24:02.970 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:DW
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
38 2014-06-26 20:24:02.840 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not
be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
Duane Lawrence

Refer the below article
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
Automatic SPN Registration
When an instance of the SQL Server Database Engine starts, SQL Server tries to register the SPN for the SQL Server service. When the instance is stopped, SQL Server tries to unregister the SPN. For a TCP/IP connection the SPN is registered in the format MSSQLSvc/<FQDN>:<tcpport>.Both
named instances and the default instance are registered as MSSQLSvc, relying on the <tcpport> value to differentiate the instances.
--Prashanth

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Script stops calculating...

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Although I am using the same script as the fields above in the columm, the script eventually stops calculating and I can't figure out why. Is there a limit of how many calculation scripts you can enter? I will attempt to attach my pdf as soon as I figure out how. Thanks.

For e31 :
var e30 = +getField("e30").value ;
var c31 = +getField("c31").value ;
if ( (e30 !== 0) && (c31 !== 0) ) event.value = e30 + c31 ;
else event.value = "";
for e32 :
var e31 = +getField("e31").value ;
var c32 = +getField("c32").value ;
if ( (e31 !== 0) && (c32 !== 0) ) event.value = e31 + c32 ;
else event.value = "";
for e33 :
var e32 = +getField("e32").value ;
var c33 = +getField("c33").value ;
if ( (e32 !== 0) && (c33 !== 0) ) event.value = e32 + c33 ;
else event.value = "";
Java console doesn't show any error... That's why I am wondering if it's not a limitation issue... or memory issue, because they are maybe too many rows or something....
The c value is not calculated.

I am trying to change my email address for an Apple ID and it is saying that it is already in use. I then sign in with that Apple ID and it says that the account is not set up yet, I don't want to set up the account, but I do want to use the email address

I am trying to change my email address for an Apple ID and it is saying that it is already in use. I then sign in with that Apple ID and it says that the account is not set up yet, I don't want to set up the account, but I do want to use the email address in my original Apple ID! HELP!

Welcome to the Apple community.
Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

I'm trying to redeem an itunes card and it gives me an error message - an unknown error occurred (-1202) try again later. I've tried for several days now. What can I do?

I'm trying to redeem an itunes card and it gives me an error message - We could not complete your itunes store request. An unknown error occurred (-1202). Please try again later. I've tried several days now. Any idea what i need to do?

Chrisj4203, thank you for your kind answer.
I have done a lot of restores to the Iphone, and resets also.
I;ve done holding both buttons as you sugested, but there is no signal appearing.
I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
I don;t knoe what todo.
I have been trying for more than one mont.
I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

With adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

Hey Paul,
Please let me know what version of Acrobat Standard are you using.
Regards,
Anubha

Cannot find my product but when i tried to register it , keeps telling that i have already registered the product. i need to see it under my name.

Cannot find my product but when i tried to register it , keeps telling that i have already registered the product. i need to see it under my name.

I am on Windows 7, and I was on Adobe.com. I went to downloads and clicked on Acrobat XI standard. It downloaded. But when I went to run it said Acrobat XI Pro and would not accept my serial number. I have done this now 4 times. I think that the system is downloading the wrong version. I am getting very frustrated and unhappy with Adobe!!!!
Sent from my iPad

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
Many thanks. That issue will be causing the iTuneshelper error message too.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

When I am trying to send photos or documents to my ipad from my computer, does my computer say the device has either stopped responding or has been disconnected when my computer shows it is iocnnected and working fine?

Why do I get the message that the device has either stopped responding or has been disconnected when my computer shows it is connected and functioning ok ?
I was trying to send either photos or documents to my ipad via a usb cable conncted between my ipad and the HP computer.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another cable and USB port
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have upgraded my Adobe acct for $89 and am trying to send a signed document. How do I send this pdf?

I have upgraded my Adobe account for $89 and am trying to send a signed pdf. How can I do this? I am logged in.

Hi paulo54376809,
Go to Adobe Send webpage.
Sign-in using your Adobe ID.
Click on the big blue 'Select files to send' button.
Choose the files you want to send
Enter recipient e-mail address and customize your message (If you want to.)
Review your options and click 'send'
Please revert back if you face any challenges.
Regards,
Rahul

When trying to send a pdf for multiple digital signatures, it keeps erroring out. What are some reasons?

I am having trouble sending out a document for digital signatures for multiple people. I enter the signature fields and click on Distribute. It then allows me to choose the receiving parties. I click on <SEND> and it processes for a moment and then I receive the following two errors: "Failed to send" followed by "Form distribution is aborted". It was working for me earlier and isn't now. I am fairly new to Acrobat and especially Digital Signatures. What are some possible reasons I am getting this error?

I finally got the document to send out by unclicking the "Collect name & email from recipients to provide optimal tracking" button, however, the responses come in as anonymous, so it's not real helpful with tracking my responses. Plus, I don't know if I'll encounter problems with follow up. The normal tracking system allows me to resend a message to those who have not responded. Now I guess I would just resend the request to those I have determined have not signed. Still working through the bugs but I'll update what I know and figure out here. Perhaps I will come to a solid solution and give a better summary.
As of now, I am sending and receiving responses... but the recipients have to change the received file to save as it is coming to them as read-only. Seems like this should be a whole lot less complicated.

I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settings

You probably have changing settings disabled in Restrictions.

When trying to sync my new ipod nano it gives me an error message (13019)

Iv had this Ipod for about a month and never had this problem until now, it will go through all of my songs like its syncing them but instead of finishing it gives me the error message. Can anyone help?

Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer. I can't figure out why it won't let me do that.
The only thing I can see when I open my iTouch on my computer is my file with photos. I can't see videos, music, or anything else. What's going on?

Ipad1 in India. Trying to connect with ATT with iPad 2 in USA. Message : this email is already in use. Don 't want to start another email!

I have a new ipad2. Cannot set up AT&T it keeps saying the email is already in use. Don't want to set up a new email address just for AT&T

You may have more than one device using your Apple account (as I did).
Some of my messages ended up on an idle iPad I had left at home.
Most, however, just stopped sending.
Various work arounds have been posted here and there.
It appears that a text message preference gets messed up.
The simplest work around that usually works (but not always, for me), is to turn off messages, reboot your devices, and then turn it back on. I also tried another suggestion to toggle off the iCloud settings and reboot. Both had the same effect. It worked for a day or two and then I had to do it again.
You may want to enable MMS and SMS texting, which usually work, even when iMessages won't.
iMessages have a blue background. MMS have a green background and you're service provider may charge you for MMS or SMS texts.
Under SETTINGS got to Messages

I am trying to send a microsoft document that it gives me an error that it is already in use

Similar Messages

Maybe you are looking for