I am trying to setup the PCIe-1473R to communicate the Basler spl8192-70km.

For a new PC with OS WIN 7 inserted PCIe-1473R, I installed 1.Labview 2014 64bit. 2.Xinlin 2014 3.RIO 2014 4.Vision Acquisition 2014. In MAX, the PCIe-1473R is no problem. But there shows error in another device ASRL10::INSTR "LPT1". But PCIe-1473R is the only NI device on the main board of the PC. Can anyone tell me how to solve this problem? Thanks
附件:
1473R_01.JPG ‏77 KB

I didn't realize you had to create a network name from your computer first I thought it was all done from the airport icon. Once I setup the network from settings on my phone it worked great. Thank you for your fast reply! :)

Similar Messages

Trying to setup wifi, how do I get the mac address from ipod touch 5th gen?

trying to setup wifi, how do I get the mac address from ipod touch 5th gen? cannot get to the setting screen as it is trying to connect to itunes.

If yo are setting up the iPod vai wifi you have to connect to a network that does not use MAC address filtering.
After it is set up yu can get the MAC from Settings>General>About>WiFi Address

I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is there a way to record at the same time analog and digital channels?If,ye

s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is there a way to record at the same time analog and digital channels?If,yes can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition
stops by a trigger?.
Thank you for your interest in advance

s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.PALE wrote:
>
> I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is
> there a way to record at the same time analog and digital
> channels?If,yes can I have timestamps for each sample?I mean,is there
> a notion of time information on this board?Finally,is there a way to
> know ,in the double buffer's case,the number of samples in the
> halfbuffer which is not full if the acquisition stops by a trigger?.
Start by looking around the examples that ship with LabVIEW (if you are
using LabVIEW).
Also look around zone.ni.com for general data acquisition information &
examples. A good site.
Mark

What is the PCI bus performance of the 1422?

I'm currently using an IMAQ PCI-1422 to acquire images from a camera. The image size is 1280x1024 @ 8-bits a pixel. Currently the camera can only run freely at 20 fps. So this data rate is roughly 26 MB/s. The IMAQ card seems to be able to acquire these images at that rate. However, I need to be able to retrieve these images into system memory at the same rate. At this time, I've only managed to retrieve the images at around 12 fps which is about 16 MB/s. Is this all I can reasonably expect from this card? There is no other activity along the PCI bus except for perhaps minor updates to the video display.
I'm acquiring images using a Grab. I use a callback on the Buffer Done signal to trigger an acquisit
ion running in another thread. Actually, I'd prefer to the acquisition in the callback itself, but I am uncertain as to how the callback is implemented and what I can and can't do in a callback. Is there documentation somewhere that I'm missing?
Oh yeah. I'm using MSVC++ and Windows 98.
Thanks

I tried the example and removed the clipping the ROI to the size of the canvas and also took out the image plot to make sure we would get accurate times. I get the same frame rate with that example as I did with my own code (around 12 fps). Also, I neglected to mention that for my own code I placed calls to timers just before and just after the call to imgGrab, and the time difference is what you would expect: about .083 seconds (average) to retrieve one frame.
I know nothing about the internal structure of the PCI-1422, but considering that we are retrieving images from the same SDRAM memory that is being used to acquire images, are we seeing some sort of bus contention on the PCI-1422 itself? Also, the camera I'm using is an evaluation board, and I have access
to the schematics and should soon have access to the CPLD design. So I can verify the design of the camera itself. I'm glad to hear that you expect to be able to transfer at 45MB/sec. That probably means that there is something not quite right either in the camera interface or perhaps in the computer system being used. But if you have any other ideas, I'd be glad to hear them.
Thanks for the response.

When using the analog inputs and analog outputs of the PCI-7344, what is the conversion between the voltage entering the card to counts? Similarly, what is the conversion between counts to voltage at the output of the card?

I am using the PCI-7344 to control my system. The analog inputs are connected to the output of my system while the analog outputs serve as feedback to the system. The system is a servo. I want to know what is the conversion between the voltage read at the input, to card counts, and finally to the voltage output to the system.

Carole,
If you are trying to do analog feedback with a servo motor, Chapter 14 of the manual talks about how to set up the torque feedback. Also linked below is a LabVIEW example of analog feedback.
Chapter 14
NI-Motion User Manual
Automatic Analog Feedback with FlexMotion example
A. Talley
National Instruments

Is the "512GB PCIe-based Flash Storage" on the new mac worth the extra cost? I am comparing with a refurb with better specs (faster CPU, larger hard drive) and from what I undersand the PCIe flash storage is the big differentiator in cost.

hello - i am considering two macbook pros
NEW - http://store.apple.com/us/buy-mac/macbook-pro?product=ME294LL/A&step=config#
REFURB - http://store.apple.com/us/product/G0ML1LL/A/refurbished-macbook-pro-27ghz-quad-c ore-intel-i7-with-retina-display
The refurb actually has a faster processor and a larger hard drive. From what I understand, the big difference in cost is the new macbook pro contains "512GB PCIe-based Flash Storage" versus the refurb "768GB Flash Storage".
Is the PCIe flash storage really worth the extra cost (and smaller size)?
PS - Also I believe the brand new one has 2 GB graphics memory as opposed to 1 GB graphics memory. I don't really care about that as much as I won't be doing a lot of video editing or gaming.

RestonManJavaLuver wrote:
Is she wrong - are these actually going to people's homes, being used, then returned and resold?
Some are some are not. Otherwise Apple has a ton of Mac's sitting around that have been returned by customers under their 14 day No Questions Asked return policy.
But they not just Returned and Resold. They go back to Apple, checked out (Tested) any parts that are not up to spec replaced and then repackaged in a plain white box to be sold as refurbs.

"How do i use all 16 channels on the PCI-6024E when using the daw acquisition toolkit in MATLAB?

I am having trouble with MATLAB's daq toolkit recognizing all 16 single-ended channels. Right now, it only detects the lower half (channels 0 through 7). How can I access the upper half? I have already changed the properties to single-ended using the MAX program.

I am not sure why you are having this problem. This might be a limitation of MATLAB's daq toolbox. Can you access all 16 single-ended channels by running a test-panel in MAX? You can run a test-panel by right-clicking on the PCI-6024E in MAX within devices and interfaces select "Test Panels." If you can access all 16-channels in MAX then the PCI-6024E is working correctly; I would suggest that you contact Mathwork's support.
Is there a reason you are not using LabVIEW to interface with the PCI-6024E? LabVIEW offers a very quick and easy data acquisition solution and was built to be used with our hardware. LabVIEW also offers a multitude of built-in analysis functionality as well.
Regards,
Todd D.
Applications Engineer
National Instruments

I am trying to setup kvm. Am I on the right track?

I am trying to set up kvm and am a bit confused (probably by old information)
lscpu
Virtualization: AMD-V
L1d cache: 16K
L1i cache: 64K
L2 cache: 2048K
L3 cache: 8192K
NUMA node0 CPU(s): 0-5
grep -E "(vmx|svm|0xc0f)" --color=always /proc/cpuinfo
Worked
zgrep CONFIG_KVM /proc/config.gz
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_KVM_VFIO=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_KVM_DEVICE_ASSIGNMENT=y
zgrep CONFIG_VIRTIO /proc/config.gz
CONFIG_VIRTIO_BLK=m
CONFIG_VIRTIO_NET=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
lsmod | grep kvm
kvm_amd 59131 0
kvm 413027 1 kvm_amd
lsmod | grep virtio
[virtio_pci 17389 0
virtio_balloon 12997 0
virtio_scsi 17714 0
virtio_blk 17295 0
virtio_net 26460 0
virtio_ring 17342 5 virtio_blk,virtio_net,virtio_pci,virtio_balloon,virtio_scsi
virtio 13058 5 virtio_blk,virtio_net,virtio_pci,virtio_balloon,virtio_scsi
scsi_mod 142915 4 libata,sd_mod,sr_mod,virtio_scsi
Is there any thing else that needs to be set up before I install virt-manager
Confused?
thanks
Dave
Last edited by spottyrover (2014-09-10 04:08:08)

1. tags around your raw output!1. [ code ] tags around your raw output! 1.
Looks pretty now. Always wondered how that was done
2. Did you deplete the usefulness of https://wiki.archlinux.org/index.php/KVM to its entirety?
that is what I am trying to follow.
Is there more modules needed?
Did it work correctly?
It lacks information on how to add modules.
I got it working the first time by following multiple how tos and in the end I do not know which bits I done was needed and which bits was not and they did.
By the way. You did not answer the question.
Am I on the right track?
After all I am in the newbie corner
Dave
Last edited by spottyrover (2014-09-10 04:28:24)

Trying to setup parallels on lion and get the floating toolbars as i can on previous os

on my imac (osx 10.6) i installed parallels 5 and loved it especially the way it made windows with floating menus and not a solid windows terminal.
I have just brought a new air with osx lion and parallels 6 and cannot get the same working environment and dont now where to get help is this a lion issue or a parallels issue.
Anyone else got similar problems if so have you resolved them and how
thanks
tony

Check System Preferences > Sound > Output
Make sure the Mute button is not selected and the the correct output device is.

Issues when trying to setup alternate sync location of OneDrive for Business / SharePoint 2013 Libraries

Hello,
I have an issue that prevents me from choosing the alternate location of sync'ed OneDrive for Business folders. I'm trying to setup an alternate location for synchronization, using the guidelines found in the Office support web site.
The option to replace the default sync location appears the first time a SharePoint 2013 Library or OneDrive for Business is setup for synchronization.
Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443247
At this point, the Library or personal OneDrive folder syncs correctly and the files are stored in the alternate choosen location.
However, on when trying to setup an additionnal Library for synchronization, the alternate sync location has not been saved and reverts to the default sync location. Furthermore, the option to replace the default sync location does no longer appear
on the dialog box.
Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443249
I have tried by first sync'ing a SharePoint 2013 Library (instead of the personal OneDrive for Business folder) with the same result. Meaning that the first SharePoint 2013 Library correctly sync's in the alternate location of my choosing. However,
any subsequent attempts to sync either a SharePoint 2013 Library or the OneDrive for Business folder results in them being sync'ed to the original default location in a folder under the user's profile directory.
I'm using Office Professional Plus 2013 (64bits). The version of Groove.exe is 15.0.4605.1000 (12th March 2014 - 13 383 360 bytes).
Is there something I'm missing ?
Thanks for any help on this issue.

Hi SpringComp,
You can change the root path for libraries you sync to your computer, though you can do this only if you’re not currently syncing any libraries. If you’re already syncing at least one library and you want to change the path, you must first
stop syncing all libraries. Then, the first time you run the OneDrive for Business wizard to sync a library to your computer, you’ll see an option to change the location.
More information, please refer to the link:
http://office.microsoft.com/en-001/support/change-the-location-where-you-sync-sharepoint-libraries-on-your-computer-HA102893480.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How do I create an interrupt on the PCI-DIO-96 from an external signal connected to the lines PC0 or PC3 of a port?

Hi everybody,
we are currently using the PCI-DIO-96 for data acquisition from an old AT-DIO-32F card. All PPIs and ports work in mode 0 (standard input/output). The manual mentions the possibility to create an interrupt from an external signal connected to the lines PC0 and PC3 of port C from a PPI. To get the interrupt I have connected my interrupt service routine to the PCI-DIO-96, enabled the master interrupt enable bit in the interrupt configuration register 2 and enabled interrupt enable bits of every PPI chip in the interrupt configuration register 1. The interrupt should be generated if a signal low-to-high transition occurs on th
e lines PC0 or PC3 of a PPI. We've simulated the signal low-to-high transition with an external voltage source connected to the line PC0. We actually saw in the memory that the line toggled from state low to state high, but no interrupt was generated. I don't have a guess what I am doing wrong. Perhaps anybody knows the solution of this problems.
Thanks and best regards.
Sven Jungnickel

You may want to try disabling your USB or IEEE-1394 host controller. It's possible that one of these devices could be on the same interrupt as you DIO-96 and causing the interrupt to not be serviced.
Regards,
Erin

Which digital camera is suitable for the pci-1422

when i purchase a digital cam for PCI-1422 , what should i focus on, for example: Resolution, interface, depth of color or etc??
How to classify the a digital cam and how to identify which is suitable for PCI-1422??
Does anybody have recommandation for me!!??
thanx!!!

There are a lot of digital cameras that work well with the PCI-1422.
Selecting the proper camera depends more on your application than the PCI-1422. You need to look at resolution and frame rate, along with bit depth, color or B&W, etc.
You will also need to select a lens that matches your application. You might just need a fixed focal length, or you might need a zoom, a telecentric lens, or other possibilities.
I would recommend discussing your application with Robert Eastlund of Graftek Imaging (800) 441-2118. He will be able to help you select the proper camera and lens for your application.
Bruce
Bruce Ammons
Ammons Engineering

HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

I am trying to setup bootcamp on my MacBook Air. Network diagnostics doesn't believe I'm connected to the internet... but I am!!???

I am trying to setup bootcamp on my MacBook Air. I have a wifi internet connection which works fine in Safari etc. However, when I get to the point of downloading the windows install files I am told the network is not connected, but it is!
I have a simple automatic connection set up to a wifi router which works fine for all standard internet functions - mail, safari, downloads in safari etc. Where it falls down is that the system doesn't recognise it in network diagnostics. When I reach the point of downloading win installation files for my air from the internet it says I am not connected to the internet and runs network diagnostics which proceeds to break my internet connection. If I stop network diagnostics, close the windows and simply switch my wifi off and on then I'm back up and running, but the network diagnostics still doesn't believe it.
Any ideas? Seems completely illogical to me...

This is the message I get if that helps anyone...

I have an iphone 5 with ios 6. I am trying to setup a new exchange email account. I need the backslash but it is not available. I can find it on other apps but not when trying to set up the mail account. (it is not on the keyboard)

I have an iphone 4s with ios 6. I am trying to setup a new exchange email account. I need the back slash but it does not show up on the keyboard. I know it is supposed to be on the +key (and is for other apps) but for some reason it is not available when setting up an email account. Is this on purpose or am I doing something wrong?

I can tell you that with Sprint their coverage area isn't as good as Verizon or AT&T.
Are you sending these imessage while on wifi or cellular data? Also your husband would need to be in a good coverage area.
Usually when imessage is unavailable it will send it as a text. Does your husband receive your imessage as a text?

I am trying to setup the PCIe-1473R to communicate the Basler spl8192-70km.

Similar Messages

Maybe you are looking for