I am trying to sharpen the scanned image of an old picture. When I use the sharpen tool in the book mode, the picture is momentarily sharpen when I hold mouse button down then fades to prior condition.

I am working on a book (theme: photo essay). I have a scanned image of an old photo which is fuzy. I try to use the sharpen tool. When I hold the track pad down to make an adjustment and then release the pad, the image is momentarily sharper then fades to its prior state. How can I get the sharp version to stay?

Similar Messages

IMac keep shutting down black screen then have to hold power button down then turn it on again i did this 4 times in all of a period of 5 minutes what to do ??

iMac keep shutting down black screen then have to hold power button down then turn it on again i did this 4 times in all of a period of 15 minutes what to do ??

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

If i use dell projector with my mac book pro the imagen is darkness

when i use projector del with my mac book pro the images and fotos is darknnes
what happen
is my mac or compatibility

Hi cachirulotraumatologo,
If you are having issues with the image quality when using your projector as an external display for your MacBook Pro, you may find the troubleshooting steps outlined in the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

My Ipad2 won't turn off. I've tried the reset method, holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either. Help ??

My Ipad2 won't turn off. I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work. I can't get onto the internet via wi-fi either (don't have a 3G card fitted). All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Print-off the scanned images for vendor invoices

Required report.
Print-off the scanned images for vendor invoices
Basically, his selection screen will be:
Vendor Invoice XXXXXXXXXX to XXXXXXXXXX
Once the user executes the program a list of invoices is presented to the screen.
Then the user will be able to select one or several of these invoices and click a print button.
However, the attachments are stored in Adobe .pdf format.
Kind Regards
Mark H,

Hi,
Write a report to fetch the data from Tables RBKP and RSEG for the vendor INvoices, based on the Invoice No(BELNR) entered on the Selection screen.
display them with the required fields on the first list. Take a single CHAR field in the internal table for CHECK BOX and display that Internal Table fields.
Keep buttons (SELECT and PRINT) on the MENU of the output screen for processing the selected records on the output and printing the selected records in the interactive report using AT USER-COMMAND function.
reward if useful
regards,
ANJI

Print the scanned image LaserJet Pro M1536dnf

After firmware upgrade fo version 20111215 to 20140123
Having problems with print scanned image.
The scanned image is printed blurry and small pixels.
How to bring back the old version of the firmware?

Hi Senja,
Welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing an issue with scanned images printing blurry and small pixels since updating the printer's firmware. I will be happy to help you.
Unfortunately you can't roll back the firmware on the printer.
I would do a power reset to see if that will resolve the issue.
With the printer still turned on, disconnect the power cable from the back of the printer.
Then disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
I have provided a document for Troubleshooting Scan Quality Problems.
Try making a copy to see if you have the same results.
If you would like further assistance from me, please let me know the following results.
What application are you scanning from?
Does the scan look alright on the computer?
Are you just having this issue printing the scanned image?
What is the DPI of the scanned image set to?
Thank you for posting on the HP Forums.
Have a nice day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hello. I dropped my ipad first gen from my chair, about 2 feet above the floor. The screen went black and I can't turn it on again. I have tried holding both buttons down at the same time, but nothing happens. Any help?

Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?

You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back.

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas?

HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas appreciated. Many thanks

to get to the Detect Displays button you have to hold down the Option key and the button appears.
SeanfromFulham wrote:
Many thanks, however I don't seem to have any relevant options under displays.

How do I keep the drop down menu in the navigation bar open without continuously holding the mouse button down?

When I use the mouse to hover over the naviation bar, I can see it, but once I select a drop down like bookmarks, I have to continuously hold the mouse button down until I move it to the bookmark I want, then I release the mouse button to select the bookmark. I used to be able to just click once to open the bookmark drop down, then click once to choose the bookmark I wanted to open. How do I get this function back?

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 23.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

TS3274 My ipad wont switch on when i hold both buttons down. I have tried charging and nothing happens. Ive only had it from brand new for 1 month

My ipad wont switch on when i hold both buttons down. I have tried charging and nothing happens. Ive only had it from brand new for 1 month

Hi there tjgem1982,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

The disk image "Name Macbook Pro.sparsebundle" is in use Try ejecting the disk image

I upgraded my Mountain Lion two weeks ago and I've experienced number of issues since then.
Now I have problem with the Time Machine.
When I try to create backup I'm keep getting following message:
"The disk image "MyName Macbook Pro.sparsebundle" is in use
Try ejecting the disk image"
The problem is that Time Machine seem to be ejected, I checked this both in Finder and Disk Utility.
Please could you possibly help me with the issue?
I work on 2010 Macbook Pro

Try the following:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in to the back of the Time Capsule
Wait a few minutes, then try another backup

TS3274 A rectangular or sqaure bubble appears when I use my ipad and I always have to tap it twice. Also when I tried to go to setting to restart it, it wont go down or up. What do I do?

A rectangular or sqaure bubble appears when I use my ipad and I always have to tap it twice. Also when I tried to go to setting to restart it, it wont go down or up. What do I do?

try pressing the home button 3 times.

I was trying to sync a song from my computer to my iPhone 4 using iTunes and it said you can transfer the music from your phone to your itunes if you want to sync it so I did and none of my music is on my phone or on itunes besides the song i was syncing

I was trying to sync a song from my computer to my iPhone 4 using iTunes and it said you can transfer the music from your phone to your itunes if you want to sync it so I did and none of my music is on my phone or on itunes besides the song i was syncing

Hi Soccer4461,
If you need to update your iTunes software, you may find the following article helpful:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/ht1338
Regards,
- Brenden

Dragging with the Middle mouse button down should move the viewport.

Just like it says in the title: I believe that dragging with the Middle mouse button down should move the viewport, just like using the hand tool. Would be very handy for people still using a mouse. This can be hacked together using SetPoint (or similar software), but it doesn't work perfectly. Photoshop should've had it for a very long time, as the middle mouse button could be used to move around documents in other applications (web browsers, word processors, other graphics programs) for years.

I've never had that happen with Firefox 4 on WinXP. I haven't updated my Netbook that runs Ubuntu to Firefox 4 yet.
1. Try disabling the Java Console 6.0.24 and the Java Quick Starter 1.0 extensions and see if that solves your middle-click problem.
2. Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.''
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I am trying to sharpen the scanned image of an old picture. When I use the sharpen tool in the book mode, the picture is momentarily sharpen when I hold mouse button down then fades to prior condition.

Similar Messages

Maybe you are looking for