I am trying to sync my mac to a roland vs2480 and can't get it to work. Anyone have experience with this?

I am trying to sync my mac to my Roland vs2480 and need to know how to make it work. I have a video I am trying to score and it has a smpte time code. How do you get that time code to the smpte "in" on the vs2480? I tried using an audio out signal from the video and sent it to the smpte in jack via rca cables but, it doesn't seem to recognize any signal. any insignt would be greatly appreciated.

Video formats supported: H.264 video up to 1080p, 60 frames per second, High Profile level 4.2 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
from
http://www.apple.com/ipad-air/specs/
it don't matter if your ipad is not the air if what you attempt to sync with it can't be played on the ipad because it don't support the format it will inform you

Similar Messages

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
Pair Headset with Phone
Turn off headset off
Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode. With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone. So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
Reset Paired Devices List
On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds. A double beep will be heard and the list will be reset. Pairing info for devices previously paired will be lost.
The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
This is what I had to do after resetting the device list on my bluetooth
4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'. Once I selected the device on the iphone by pressing on it then it changed to "connected".
Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
I hope this helps others!

I'm trying to have existing Exchange accounts setup on my new iMac and can't get it to work.

I have existing Exchange accounts setup on my iPhone and iPad to access my work email. I'm trying to do the same on my new iMac and can't get it to work. I have it setup the same as my iPad and it asks me for my password over and over...any suggestions?
<Re-Titled By Host>

Hi mwatts18,
As a preliminary troubleshooting step, you should reference the information in the following article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
I would especially suggest that you delete the account and re-add it, making sure that you are entering the correct password when you add the account. Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I recently bought some songs from itunes, and I tried to sync my mac air laptop to my nano ipod, but it didn't work. I usually use my PC computer to do this, and my music is in the itunes library on my mac, it just won't sync to my ipod. Any ideas?Thanks!

I recently bought some songs from itunes, and I tried to sync my mac air laptop to my nano ipod, but it didn't work. I usually use my PC computer to do this, and my music is in the itunes library on my mac, it just won't sync to my ipod. When I tried to sync my ipod to my PC to see if the computer was the problem, my recently purchased songs still didn't show up. Any ideas as to what to do? Thanks!

http://www.everythingicafe.com/quick-tips-how-to-delete-songs-from-your-iphone-i pad-or-ipod-touch/2012/02/14/

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I. We are able to do video chat through gmail, but I had hoped to use iChat. I am using OS 10.6.8, iChat v. 5.0.3. What am I missing?

HI,
iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
However it will not Video to the Web Page login to iGoogle or the Web Mail Page login. (where people can Google Chat as it were in a Web Browser).
Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
More on this here This article has been changed several time in the recent months. It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
It could be Internet speed but at this stage I would doubt this at this stage.
10:27 PM Saturday; January 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I am trying to sync songs from itunes to my ipad and can't find my library on my ipad.

I am trying to sync songs from itunes to my ipad and can't find my library on my ipad. Can you help?

Where are you looking on the iPad ? Your synced music (and that which you download from iTunes directly on the iPad) should go into the Music app
Syncing music : http://support.apple.com/kb/HT1351

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported.

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported."

Where is the Library? It needs to be on a disk formatted Mac OS Extended (Journaled)

Does anyone have experience with error 504 when trying to download a podcast?

Does anyone have experience with error 504 when trying to download a podcast? I've been a subscriber for two years without issue and in the last two days can't download this particular podcast (everything else is working fine - music, other podcasts, etc)

The album was released on the 27th March this year, so the error occurred almost immediately after it was supposedly available.
In the manage pre-orders section of my account, it says AVAILABLE but does not give me any choice over whether to download it, just to cancel it. Is this normal?
iTunes customer services reset my password and tried to download the album themselves, but they also got the 5002 error, so it's been passed off to the engineers. How long does that usually take?
If anyone has any other suggestions, it would be greatly appreciated.

Sync with k750i? can't get it to work. anyone else?

followed instructions from oracle for s700/k700 and i still can't get it to work. works fine on nokia 9300. anything specific i need to know? thanks!

Yep I have the same problem. Is ther a log we can check out... I have tried to get an answer on this for a long time. but no answers.
Please help her.

Flash CS4 I'm trying to fade a photo and can't get alpha to work

I installed Flash CS4 and the alpha doesn't seem to work. I follow all the instructions to the letter but get no results. I had no problems working in Flash MX

I follow these steps and do not get a fade. I have tried motion tween and classic tween, neither works.
In a new layer draw any vector object, say a circle. Convert the object into a graphic symbol (select the object and click F8) and name it, say 'g_circle'.
Insert Keyframe (F6) in the 20th frame and create a Motion Tween from frame 1 to 20.
Click the 10th frame on the timeline and insert a Keyframe (F6).
Click the 'g_circle' instance displayed in the 10th frame and give it an Alpha value of 40%
Save your work and test the Movie

Anyone have experience with Virgin Broadband2Go devices on Mac OS 10.5?

I'm going to be staying for three weeks in a place that has no wireless. I've read that Virgin's pre-paid Broadband2Go devices, the Ovation MC760 USB stick and the MiFi 2200, a portable “hotspot” that connects to Virgin Mobile’s wireless broadband 3G network (Sprint) and then converts the signal into standard Wi-Fi, could solve my problem.
However, the one-time activation process seems to be a big hassle if you have a Mac--some users had to resort resort to activating the USB stick on a PC and then plugging it into their Macs, which seems to work, and one person reported a disastrous conflict when he plugged the USB stick (though apparently not the larger "hotspot"/router version) into his OS 10.5 Mac.
Has anyone had experience activating/using either of these devices, which are apparently the only pre-paid mobile wireless devices on the American market? (I know Verizon has a contract plan, but I'm strictly the pay-as-you-go type.) Thanks for any advice you have!

I'm trying it right now. I'm not at all convinced that this is gonna work. I keep getting a "no dial tone" sort of modem error where I am. http://www.novatelwireless.com/index.php?option=com_content&view=article&id=108& Itemid=5 suggests that the MC760 isn't one of the models supported by Novatel Leopard drivers... kinda odd if true.

Trying to create HTML5 Video Playlist in Edge Animate - I can't get it to work. Please help!?!?

Hi All,
I am creating an interactive site through Edge Animate and am in the process of trying to create a HTML 5 Video Playlist to function within Edge Animate.
Current Process - Example:
I have 3 videos that need to be played on a certain page.
I created a symbol and dragged the videos to the stage and hidden them within that symbol's timeline.
I then use thumbnail images in a side playlist to either .remove(); .hide(); a video and .show(); the next.
However when I do a hide / show option, the video continue to plays in the background if I don't also create an if/else statement to pause it.
My concern with pausing it is that it will continue to load and dramatically slow down the load time of the site.
References:
I found this which looks very helpful but don't know how to add this to edge composition.
http://demosthenes.info/blog/909/Create-An-Automatic-HTML5-Video-Playlist
Please help or put me in the right direction to create a playlist would be hugely... AMAZINGLY.. helpful.
Thanks,
Jason

Hi Joe,
Thank you so much for your help on this one. It is hugely appreciated!!
I have been working frantically to implement your solution to get this working. I used the 'change src' method.
I have added all my code below in case anyone wants the solution in the future.
Could you please help below as I am now totally stuck with the <track> and 'event listener issues' !!
Issue #1:
I am having major problems with loading the 'closed captions' track element.
Everything I click for the video to change source / to the next video, the closed caption track adds to the video and doesn't 'unload' the previous one. You then end up with multiple different subtitle tracks on the video screen
- The closed captions / subtitles are not showing up in Google Chrome either?
Issue #2:
I can't get the event listener in edge animate to work for 'playing' and 'ended'. Can you please help and point me in the correct direction??
Screenshot (showing what happens after the 3rd video is loaded)
This is the Code I am currently using in the "Creation Complete" of this Symbol.
SET UP OF VIDEO PLAYER AND FIRST VIDEO
var vid = sym.$("video_Chapter5");
vid.html('<video id="ch5video" width="100%" height="auto" margin= "0 auto" \
position ="relative" poster="video/video1_poster.jpg" controls="controls" </video> \
<source id ="videomp4src" src="video/Video_mp4_1.mp4" type="video/mp4" </source> \
<source id ="videoogvsrc" src="video/Video_ogv_1.ogg" type="video/ogv" </source> \
<source id ="videowebmsrc" src="video/Video_webm_1.ogg" type="video/webm" </source> \
<track id ="trackvtt" kind="subtitles" src="video/Video_1_Script.vtt" srclang="en" label="English" hidden </track>');
VARIABLE IDS
$(document).ready(function() {
var videoID = 'ch5video';
var sourceID1 = 'videomp4src';
var sourceID2 = 'videoogvsrc';
var sourceID3 = 'videowebmsrc';
var trackID = 'trackvtt';
var vid1mp4 = 'video/Video_mp4_1.mp4';
var vid2mp4 = 'video/Video_mp4_2.mp4';
var vid3mp4 = 'video/Video_mp4_3.mp4';
var vid4mp4 = 'video/Video_mp4_4.mp4';
var vid1ogv = 'video/Video_ogv_1.ogv';
var vid2ogv = 'video/Video_ogv_2.ogv';
var vid3ogv = 'video/Video_ogv_3.ogv';
var vid4ogv = 'video/Video_ogv_4.ogv';
var vid1webm = 'video/Video_webm_1.webm';
var vid2webm = 'video/Video_webm_2.webm';
var vid3webm = 'video/Video_webm_3.webm';
var vid4webm = 'video/Video_webm_4.webm';
var script1vtt = 'video/Video_1_Script.vtt';
var script2vtt = 'video/Video_2_Script.vtt';
var script3srt = 'video/Video_3_Script.vtt';
var script4vtt = 'video/Video_4_Script.vtt';
var newposter1 = 'video/video1_poster.jpg';
var newposter2 = 'video/video2_poster.jpg';
var newposter3 = 'video/video3_poster.jpg';
var newposter4 = 'video/video4_poster.jpg';
VIDEO PLAYLIST THUMBNAIL BUTTONS - TO CHANGE VIDEO IN PLAYER
sym.$('btn1').click(function(event) {
sym.$('#'+videoID).get(0).pause();
sym.$('#'+sourceID1).attr('src', vid1mp4);
sym.$('#'+sourceID2).attr('src', vid1ogv);
sym.$('#'+sourceID3).attr('src', vid1webm);
sym.$('#'+trackID).attr('src', script1vtt);
sym.$('#'+videoID).get(0).load();
sym.$('#'+videoID).attr('poster', newposter1);
sym.$('#'+videoID).get(0).play();
sym.$('btn2').click(function(event) {
sym.$('#'+videoID).get(0).pause();
sym.$('#'+sourceID1).attr('src', vid2mp4);
sym.$('#'+sourceID2).attr('src', vid2ogv);
sym.$('#'+sourceID3).attr('src', vid2webm);
sym.$('#'+trackID).attr('src', script2vtt);
sym.$('#'+videoID).get(0).load();
sym.$('#'+trackID).load();
sym.$('#'+videoID).attr('poster', newposter2);
sym.$('#'+videoID).get(0).play();
sym.$('btn3').click(function(event) {
sym.$('#'+videoID).get(0).pause();
sym.$('#'+sourceID1).attr('src', vid3mp4);
sym.$('#'+sourceID2).attr('src', vid3ogv);
sym.$('#'+sourceID3).attr('src', vid3webm);
sym.$('#'+trackID).attr('src', script3srt);
sym.$('#'+videoID).get(0).load();
sym.$('#'+videoID).attr('poster', newposter3);
sym.$('#'+videoID).get(0).play();
sym.$('btn4').click(function(event) {
sym.$('#'+videoID).get(0).pause();
sym.$('#'+sourceID1).attr('src', vid4mp4);
sym.$('#'+sourceID2).attr('src', vid4ogv);
sym.$('#'+sourceID3).attr('src', vid4webm);
sym.$('#'+trackID).attr('src', script4vtt);
sym.$('#'+videoID).get(0).load();
sym.$('#'+videoID).attr('poster', newposter4);
sym.$('#'+videoID).get(0).play();
EVENT LISTENER FOR PLAYING - TO CREAT BACKGROUND /LIGHT BOX SCREEN
sym.$('#'+videoID).get(0).addEventListener('playing', function () {
sym.getSymbol("backscreen_Ch5").$("backscreen").show();
sym.getSymbol("backscreen_Ch5").play("play");
EVENT LISTENER FOR ENDED - TO PLAY NEXT VIDEO IN SERIES
sym.$('#'+videoID).get(0).addEventListener('ended', function () {
//code to play next video

Help! New to Mac and can't get imovie to work

hi
i just bought a refurbished iMac and I'm trying to make/edit dvd's from my sony dcr-dvd203 camcorder. Since it says it doesn't support the camera I've tried burning the mini-dvd onto a regular dvd. but how do i import and save the contents of the disk drive so i can work on it?

When i put the disc in the drive it plays on the DVD player but doesn't comeup on iMovie.
Sounds like it is working properly. iMovie is not designed to to edit MPEG-2 content. Even if the DVD where in a camcorder and properly recognized, iMovie would have to demultiplex the AC3 content, convert it to AIFF and store it in a generic MOV file container. Also, since only about 6.67% of the video frames on the DVD are editable, the other 93.33$ would have to be converted to intra-frames before it could be merged with the audio. Even then, since audio and video of your original file was synchronized with each other spatially, offsets have to be generated to minimize drifting between the two tracks in a temporally synchronized MOV file container.
Am not trying to "snow" you here with technical matters but just indicate some of the problems facing users of multiplexed MPEG-2 (HDD/DVD) content camcorders. Some work well with iMovie '08 while others may have problems with a particular work flow or simply don't work at all. In all cases, however, you the user can opt to do what iMovie '08 may not be able to do on its own -- manually convert the data to a suitable format which iMovie '08 can handle.
As previously indicated, the MPEG-2 codec was developed as a distribution and delivery compression format -- not an editing format. It is well suited for delivery and viewing by DVD and Satellite because it condenses the data for compact storage or transmission via relatively narrow bandwidth. Essentially what you have to do is de-compress the data to a an edit compatible data format which is usually stored in files of much greater size. This means disregarding the original purpose for which the camcorder manufacturer specifically chose this particular storage medium.
What I recommend is that new users simply download the free iSquint application. (This is the "smaller brother" application of Visual Hub.) Since it is free, does not require any special codecs, and is very simple to use, it make a good starting place for this type of conversion. Basically, if you can get your VOB or other "muxed" MPEG-2 content file to your hard drive, you should be able to convert it for use in iMovie '08. Even in its default opening mode, if you drop your "muxed" file to the work area, it will quickly create a 320x240 MPEG4/AAC which can be opened in iMovie '08. Using the "Optimize for TV" option will create a 640x480 standard VGA display file with somewhat better quality. Increasing the video data rate increase the video quality even more. (Actually, you are not really increasing the quality here, but rather simply preventing the unnecessary loss of video quality.) In any case, switching to H.264 compression format could possible improve quality even more since this compression format is 2.0-2.5 times as efficient as MPEG-4 used above but increases the amount of time required for the re-compression process.
Thus, the paragraph above should allow the novice user to determine if his or her file can be easily made iMovie '08 "edit" compatible, as well as, explore some of the settings and their effects on the conversion process. Since the application is, as already stated, free, standalone, and easy to use, it allows the new user to evaluate the basic conversion process with only a small investment in terms of time. It also allows them to determine if they need or desire to invest money in more advanced programs allowing a wider variety of output formats, additional features, and the possible potential for even higher quality editing. This recommendation merely offers the interested user an opportunity to gain the necessary experience upon which to base a "more informed" decision regarding where to go/what to do next.

Anyone have experience with using Oracle's free VirtualBox on a Mac?

I'm a new Mac user, and am wondering about experiences with Oracle's VirtualBox for simultaneously running Windows software? I have some professional software I use for work that is PC-based, and if I can use the free Oracle download it would be cheaper than paying for comparable Mac software.
Thanks!
Jo

Wikipediahas a review of 3 VMs
If you do need to run native Windows install ir on its own drive and use Parallels7 to run under Mac OS as guest OS

I am trying to sync my mac to a roland vs2480 and can't get it to work. Anyone have experience with this?

Similar Messages

Maybe you are looking for