I am trying to test an 810 an am getting an error in the business message
I am trying to test an 810 an am getting this error in the business message report.
Machine Info: ("Client host name")
Failed guideline.
Version: Oracle Application Server Integration B2B, Release 10.1.2, Build dev_B2B_10.1.2.3.0_SOLARIS_RELEASE.
Hi Anuj,
Thanks for responding.
Its an outbound 810. There are no internal properties in the payload. The error message report states the following
Machine Info: (oracle.lhdottie.com)
Failed guideline.
error code is AIP-51505.
There are no <Internal-Properties> in the xml payload.
Is there anything else I need to look at?
Vijay
Similar Messages
-
I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
everytime i try to update to 10.5.1 i get an error saying 'the feature you are trying to use is on a network resource that is unavailable'? its windows!
Which particular .msi file does the message go on to say can't be found, seg?
-
I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!
You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81. -
I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on each tune I select and a "?" appears beside the song. Does this sound familiar to anyone?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?
AIrPlay to Apple TV before you attempt Mirroring
AirPlay Mirroring
http://support.apple.com/kb/HT5209
Trouble shooting AirPlay
http://support.apple.com/kb/TS4215 -
My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?
Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
This is a question for a mini iPad...
I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred. I have tried shutting down and restarting. I've tried changing the password. I get the error message with free and not free apps. Any suggestions on how to fix?Reports are that this is a problem with the iTunes Store that they're working on. Some people have had success after signing out of their account and back in. If that doesn't work for you, wait a few hours or perhaps until tomorrow and by then they may have the problem sorted out.
Regards. -
After trying to charge my iphone, I'm getting a picture of the USB plug on the bottom with an arrow pointing upwards to an itunes icon, but I cannot get phone to go to it's normal display. Please help.
Put the device in DFU mode (Google it) and restore.
-
HT1473 Trying to download cd's and keep getting 4010 error. How do I correct this?
Trying to download cd's and keep getting 4010 error. How do I correct this?
if you have itunes match - dry disabling it - then disable your antivirus and try again - good luck!
-
When m testing webdynpro abap application m getting this error help me to get solution
hi all,
when m testing webdynpro abap application m getting this error help me to get solution.
plz find the screen shotHi
I think you are using the IDES system, Can you check the services in SICF transaction. If the service is not activated you activate it again.
In this path you will find in the below path and try to check/activate the services relevant to the WDA stack.
sap/bc/webdynpro/sap -
I recently downloade Firefox v6.0 but had to remove it via the Control Panel>Add/Remove Program. When I downloaded v6.0 again and tried to re-install it I keep getting an error messsage that said that I had to reboot to fully remove the previous copyof v6.0. However when I did reboot I get the same error message. I'm sort of stuck in a loop and can't figure out how I can re-install v6.0. I am running Windows XP on a Dell Inspiron 9300 laptop.
Please do the following.
Click '''Help '''| '''Check For Updates'''. The option to update should appear and version 3.6.17 should download and install.
However, sometimes things go pear-shaped and you get version 3.5.19. If that happens, repeat the same steps to update to 3.6.17.
Once you have 3.6.17 installed, you'll get the opportunity to update to the current version which is 4.0.1 ''Please don't do that for the moment because you first of all have to update your plugins''. To do the latter, please do the following.
Go to http://www.java.com/en/ and install the latest version of Java.
Update Adobe Shockwave for Director via http://get.adobe.com/shockwave/
Update Adobe Flash via http://get.adobe.com/flashplayer/
Update Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO
For security details regarding the Adobe updates, see: http://www.adobe.com/support/security/advisories/apsa11-02.html
Once you've updated all those, go to '''Help '''| '''Check For Updates '''again to update to version 4.0.1 -
When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
1015 ? I'm trying to update my iPhone 3 and get this error message. The phone belonged to my wife, and I'm trying to restore it to factory settings as new owner. Any ideas?
Before beginning the download, try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the secure OS your computer is running.
-
I tried to sync my iphone4 to my pc (not mac) and the following message went out: I tunescould not back up the iphone because an error occurred I restore my phone but nothing happened. What shall I do? (my ipad is working perfectly when i sync it)
I dont know why this happens.Unfortunately, "because and error occured" doesn't give you much to go on. Some general things I would try if you haven't already:
Use Disk Utility on your mac to repair disk permissions, then reboot and try backing up again.
Use Finder to go to ~/Library/Application Support/MobileSync/, then control-click on the Backup folder and select Get Info, then check Sharing & Permissions at the bottom and make sure your username has read & write priviledges
Try closing all apps, then reset your phone: double-tap the home button, tap and hold the apps at the bottom until they wiggle, tap the minus sign on all apps to close them. Then reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), and release
Try a different usb to dock connector cable; ensure that your case isn't interfering with a good connection to the dock connector at the bottom of your phone; clean the dock connector at the bottom of your phone (e.g., with a dry toothbrush); troubleshoot your usb connection (http://support.apple.com/kb/TS1286)
I know this looks like a laundry list, but unfortunately it's hard to isolate the problem without a clear error message. If the problem persists, you might try posting in the iMac or iTunes forums for other ideas.
Maybe you are looking for
-
I have a 733 Quicksilver G4 desktop running OS X 10.3.9. My Mac shipped with a CD drive. I recently replaced it with a DVD drive. Very nice, except I don't have DVD Player and can't watch DVD movies. I have my OS X installation disk, but I can't find
-
Sub-Tabs attached to HTML docs in CS4
Anyone else find this to be true as well? Do yourself a favor and don't use the sub-tabs under a html doc to edit CSS. They dont update when you have the CSS file in its own tab and save. It makes it incredibly confusing switching back-n-forth betwee
-
Video Preview Pixilated in Premiere Elements 8.0
All of my home movies captured on MiniDV using a Panasonic PV-GS400 in Standard 4:3 are distorted in the preview video in Premiere Elements 8.0. They worked fine in PE 2.0 and were in fact captured using PE 2.0. I've verified that the Projects settin
-
How to update Mac os 10.7.5 to latest
how to update Mac os 10.7.5 to latest
-
Send transactional data to external audit firms
Hi I would like to know how the transactional data is sent to external audit firms in the other companies that have implemented Financial accounting. Thanks Deepa Message was edited by: Deepa Karuppiah