I am trying to update FCPX to latest version and I get message: FCP already installed on this computer use software update

I have FCPX on my desktop and laptop. Both OSX ver 10.6. My desktop is a Mac Pro, Laptop is a Mac Book Pro early 2009. I was able to update my installation on the laptop but when I tried to update the Mac Pro I got a message stating that the program is installed and I should use software update. Both computers still have FC Studio installed. Any idea why I am getting this message on my Mac Pro?

Make sure it's
OS X v10.6.8 or OS X v10.7.5 or OS X v10.8.3 or later.
and if it is you can delete the Final Cut Pro X application from your Applications folder. Then go to Purchases in the Mac App Store and download- it will be the latest version.

Similar Messages

I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:     InPageError   Error Status Code:     c0000185   Faulting Media Type:     00000003   OS Version:     6.1.7601.2.1.0.768.3. Any clue why or how

I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:
InPageError   Error Status Code:
c0000185   Faulting Media Type:
00000003   OS Version:
6.1.7601.2.1.0.768.3. Any clue why or how to fix?

InPageError
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get itunes to launch properly afterwards?

Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell computer w/ windows 7 with minimal programs installed

Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

Can't install 10.5.8 using Software Update

I haven't been able to apply the past few OS X updates (including the current 10.5.8 update) using Software Update. I get an error message telling me I don't have sufficient privileges. This is strange because I'm the admin user with full privileges.
I then have to download the combo updater and do it manually. It's not that big of a deal, but I do wonder why it's happening and what to do about it.

I'm not sure about that, but if you are hesitant about doing it, at bare minimum go to Apple menu -> System preferences -> Software Update, and turn it off, and quit from System preferences, and then go to the various Library folders under:
Hard drive
Users - yourname
and
System
and copy from the Preferences folder in each one to a folder on your desktop that allows you to remember where you copied from any SoftwareUpdate plist you encounter. Once that is done, go ahead and delete them from the Preference folders, and restart your Mac.
If Software Update still fails, you may need to repair permissions with Applications -> Utilities -> Disk Utility.
And if that doesn't work, how full is your hard drive?

I just updated to the latest version and now I can't minimize the firefox window. How do I get this back?

I have a Mac and can no longer minimize the firefox window by double clicking the title bar into my dock since I updated to Firefox's latest version. How do I get this feature back?

I've always been able to minimize all my windows by double clicking the title bar. Yes, I could click the yellow button -- I just want the old feature back because I do it so automatically. Now when I double click the title bar it opens a new tab. I was able to do this with all the previous versions of Firefox as well.

Just bought my new macbook air, i noticed that my version is os x 10.9 (btw its 2013 model). how can i upgrade it to the latest version? it only shows apps such as numbers etc on the software update on app store

just bought my new macbook air, i noticed that my version is os x 10.9 (btw its 2013 model). how can i upgrade it to the latest version?(to 10.9.2 or 3?) it only shows apps such as numbers etc... of the software update on app store.

Here is a link to download 10.9.3 Update (Combo) manually:
http://support.apple.com/kb/DL1746.

I am trying to download Adobe reader latest version and when I hit download a bar appears at the top of the screen telling me to install missing plugins but firefox states plugins up to date what can I do?

I am unable to download Adobe reader to update my system as I only have version 7 on my computer. Normally I would be able to download direct from Adobe and my system would update but when I try to download a message bar appears which states on the left hand side "additional plugins are required to display all the media on this page" and on the right hand side there is a button which states "install missing plugins". When I click on the button a dialog box appears which states "no suitable plugins where found with a message next to a manual install button "unknown plugin(application/getplusplusadobe16299)

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

HT1925 I am endeavouring to install iTunes latest version. I am instructed to find a new path to Apple Software Updater. I am told that it is no longer available on my network. I can find such a file in my Program files.How do I uninstall this to allow t

I am endeavouring to upgrade iTunes. The upgrade always stalls at a point where there is a need to access Apple Software Updater, which is reported as no longer being available on my network. In My Programs, I have a folder called Apple Software Updater, to which I can browse, but within which I cannot trigger any action. Instructions suggest uninstalling iTunes, then Quicktime, then Apples Software updater, at which the de-installation process stalls as it cannot be found, whilst being there. I am advised to seek Techical Support!
Any ideas, suggestions etc?
Regards
Hugh

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

OMG, updated to the latest version and itnow loads as slow as dialup, I diddn't change anything else?

29.01 update is TERRIBLE! New interface sucks! FF loads like I'm on dial-up. I changed nothing but but updating FF. Thia has never happened before. Please send me instructions to get this POS off my machine and instructions to get the last version back on, or I will be forced to switch to a different browser. I can no longer recommend FF to other users. I always made clients replace IE with FF, not anymore until this situation is resolved. We should not have to change anything (firewall permissions, etc.) if the old versions were working fine. I won't no other instructions to fix this, other than to roll back to previous version. Mozzilla was one of the few companies I had no problem updating when new updates came out, for fear of the update cocking things up. Apparently, not anymore. Even you now have to be added to my list that has to be researched and wait before I apply an update! It's a sad, sad day for Mozilla.

If you've read my post, you'll see that it '''was the update 29.0.1''' that I had applied which screwed everything up

OS X v10.9.3 is already installed on this computer. Use the Updates page to install the 10.9 update or if you would like to download the full OS X installer click Continue."

I signed into Itunes and as part of my Downloaded list I saw that OS X was not downloaded back from October 2013. When I clicked to download this was the message. Should I Continue to Download or is OS X v10.9.3 the most current and/or sufficient? I'm obviously a bit confused. A little help with this would be great
Thank You,
Julesinthesky

Mac OS X 10.9.3 is the latest released version of the Mavericks operating system.
You can see what you have installed by clicking the apple, left-side of the menu bar, About This Mac and you will see below the Apple logo the installed version of the operating system.
If it is not 10.9.3 and you want to update to that version, then continue with the download and install.
Or, you can simply click Software Update (below About This Mac) and the system will do that for you.

I have been using Firefox with no problems recently updated to new version and now getting message "The proxy server is refusing connection firefox is configured to use a proxy server that is refusing connection" what do I do?? thanks

As above, was using the updated version for a short time before this happened

You may have installed an extension that made changes to the connection settings.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

Updating to the cloud (Lightroom and photoshop) lightroom 5.7 already installed

Hi !
How do I update to the CC (lightroom and photoshop) if I already have lightroom 5.7 installed and I work my photos from an external hard drive.
I have a macbook pro.
Thanks

>If I uninstall Lr 5.7 from my mac, do I have to reinport all my photos into the susscription Lr ?
No. The photos are in a catalog file, not in the application so you shouldn't have to reimport. At most you need to point the CC Lightroom to your catalog file. The subscription LR is identical to the CC one, so there really is absolutely no reason to install the CC one. I would only install the CC one when LR 6 comes out.

I updated to the latest version and now I do not have the page controls at the right hand side and bottom and can only move the page up and down using the mouse scroll wheel. I also cannot see the whole page I am trying to view.

When I open the web browser I cannot see the whole page and I cannot move the image sideways and must use the mouse scroll to move up and down.

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

I just tried to install the latest version and am getting an error message -- error 7 1114. Help!

Really frustrated that I just tried to install the latest iTunes update and it killed my iTunes. I have been at this for a couple of hours trying to fix it--suggestions welcome!

Hi Meskijian,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Trying to update ipad2 to newest version and I get an error 9006. What is an error 9006?

After 5 hours of updating my new Ipad 2 to the newest version I get an error 9006. What does it mean?

I have the latst IPAD with retina display. Trued to update to 7.0, kept getting error 9006.
Tried all the fixes, nothing worked. i have an MAC so it should all work together. I think Apple needs to get this figured out.
tk

I am trying to update FCPX to latest version and I get message: FCP already installed on this computer use software update

Similar Messages

Maybe you are looking for