I am trying to update my mac to os x snow leopard but the cd won't run on my computer

I am trying to update my mac to os x snow leopard but the cd won't run on my computer. I'm using an external dvd hardrive but I don't see why that would make a difference in wether or not it runs.

Well, that may be the cause of the no install problem, as Snow Leopard does require at least 1gB of RAM. The Apple link below will show how it is installed.
http://support.apple.com/kb/ht1651#link3
The link below is for a highly recommended site to purchase additional RAM.
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/Macbook_ selector

Similar Messages

HT1291 i had upgraded my mac book pro to snow leopard but the cd /dvd is not working on this os

hi,
I had upgraded my macbook Pro with a snow leopard os and added parallels and windows 7 prof , but the cd/dvd is not detecting please help me out

Jain.vikas wrote:
hi,
I had upgraded my macbook Pro with a snow leopard os and added parallels and windows 7 prof , but the cd/dvd is not detecting please help me out
When you use a virtual machine software, it can "take over" the optical drive for the virtual machine operating system, so the disk won't appear in OS X or on the desktop. You need to disable the virtual machine from accessing the optical drive. Usually if the virtual machine is not booted up, then control returns to OS X for the hardware.
If the disk is not appearing in Windows, it's because you need to enable the virtual machine to access that piece of hardware.
First use the Apple Menu to Software Update 10.6.3 to 10.6.8
Next update Parallels to the latest version, if you get a grey screen and the Mac refuses to boot, hold the Shift key down (Safe Mode) while booting up again to disable Parallels and other at boot kernel externsion files, update Parallels and then reboot normally.
While in Windows in the virtual machine, Windows Update to the latest version (Control Panel) and also make a "snapshot" this way you can revert to that for updates or if you get malware. Install the free Microsoft Security Essentials, it's good enough in most cases as you can "fall back" on the virtual machine snapshot if you get infected.

I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

Hi spiritentrep,
What Adobe software are you referring to? Are you using Acrobat? You should have no problems running Acrobat XI on Yosemite, and as along as you have compatible scanner drivers for your Epson, you should be fine there as well.
Best,
Sara

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now.

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now. I've also installed the 10.5.8 combo update but that didn't help it. I've tried restarting the macbook with the disc in, holding c, all that. Why won't this work?!

Zap the PRAM and Reset the SMC, then try again.

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

I tried to update my ipad from ios 4 to 5 and now it won't connect to my computer - it is fully restored and can't connect - getting an error message. Help!

I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
Help!

Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download)

Trying to update iMac G5 with OS X Snow Leopard and unable due to no Intel proccesor. Are all new upgrades going to be unavailable? What is the last available upgrade?

I'm trying to update my parent's iMac G5 with OS X Snow Leopard and unable to do so because it doesn't have an Intel processor. Are all new upgrades going to be unavailable? What is the last available upgrade? Is it possible to get an Intel processor installed?
Thank you
Lindsay

Actually you can upgrade to snow leopard. I have an iMac G4 and upgraded to snow leopard by installing it using an external DVD RW drive. It was complicated but it worked. I ended up going back to using tiger though. I liked it better the simple old school way.

Just updated to 7.0.1 for Mac Snow Leopard, but the icon in my dock isn't the firefox symbol, it's a "document" icon. How can I get the firefox icon in my dock again?

I was given an auto-update message from Firefox, which asked me to restart the program to initiate the update. As soon as Firefox restarted, I got a weird document icon in my dock - in the place where the Firefox icon was moments before. The new update of Firefox seems to be working just fine, but I would like the Firefox icon in my dock and not this unrelated icon. Can you help, please?

I had this problem. Re-instal Firefox. After you drag the Firefox icon in to the Applications icon it is going to ask you if you're sure that you want to replace the version that's there - say yes. Then go down to your dock and remove the Firefox icon - drag it off the dock so it "poof!s" away. You can now put the icon on your dock again from your newly updated version. If that doesn't fix it drag it off the dock again, probably no need to re-update for the third time. Fixed it for me anyway. GL!

HT4623 im trying to update my ipad 2 to ios 4.3 but the update software button isn't there to click on! any ideas please?

I'm trying to upgrade to ios 4.3 on my ipad 2 but it's telling me to tap on general then upgrade software but that upgrade software button isnt there to tap, any ideas plz??

The Settings > General > Software Update option only appears when you have iOS 5+ installed, as you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases if you are on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Your iPad should be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change.

Trying to update CS5 Design Premium, to 15.0.2 but the installation keeps failing. Windows 8.1

This is what I get. Every time.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
Thanks

manually update, http://www.adobe.com/downloads/updates/

Trying to update from 10.4.11 to snow leopard, the genius bar said I should be able to do this I only need 1 GB of RAM and I have 2 GB. I put in the SL disc and my Macbook pro spits it out. What do I do without needlessly spending more money to upgrade?

So this disc won't load. I recently bought a new ipod nano, but am unable to put songs on it without the latest version of itunes.
My Macbook Pro is 2008 and has 10.4.11 the guys at the genius bar said to upgrade to snow leopard to upgrade to lion and I shouldn't have a problem. I was told I need 1GB of RAM and I have 2GBs of RAM but the disc spits out every time after about 3 minutes.
This is my computer info, please please please help me install this disc so I can use this ipod I bought from you that I've been super psyched about using.
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per processor):          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP31.0070.B07
SMC Version:          1.16f11
Serial Number:          W8******X92
Sudden Motion Sensor:
State:          Enabled
I don't want to be frustrated with apple anymore, please help me so I can be happy with apple again.

MAshmen wrote:
disc so I can use this ipod I bought from you that I've been super psyched about using.
I don't want to be frustrated with apple anymore, please help me so I can be happy with apple again.
You didn't buy anything from us.
These forums are user-to-user; no Apple staff are involved other than to moderate.
Meanwhile, I refer to you to X423424X's post.

I have tried to download bust a marble. the icon shows up but the game won't run.

I have downloaded "bust a marble" from the apple apps; the icon shows up but the game will not load or play.

You should try restarting your iPod by holding the lock button until a "slide to power off" bar appears at the top, slide then trun it back on by holding the lock button until the apple logo appears. If this doesn't work then try to download it on iTunes and then sync it to your iPod.
Hope this helps
=p

I'm trying to upgrade from 10.5.8 to Snow Leopard

I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.". Isn't Snow Leopard 10.6?....so now what?

It sounds more like you are trying to use an updater rather than the Snow Leopard installer DVD. You might read over the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

Dreamweaver 8 install on Mac OSX 10.6 Snow Leopard

Hi all,
I have just done a fresh install of Mac OSx Snow Leopard (10.6) and am trying to install our copy of Dreamweaver 8 onto it. However I have now run into a few problems. Firstly it came up with an error message stating that some old format is no longer supported or something. I cant get the error message back up now, as now the CD will not mount within OSx!
Can anyone assist with this? Thanks.

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

I am trying to update my MAC to get iCloud on it, prior to the ios7 update. Need help figuring this out!

I am trying to update my MAC to get iCloud on it, prior to the ios7 update. I do have a pc as well, so i can sync it there if needed. any help or suggestions are much appreciated!

beachblondie wrote:
... I am just afraid of losing everything ...
How to BackUp > http://support.apple.com/kb/ht1766
What gets Backed Up
iTunes http://support.apple.com/kb/ht4946
iCloud http://support.apple.com/kb/PH2584

I am trying to update my mac to os x snow leopard but the cd won't run on my computer

Similar Messages

Maybe you are looking for