I am trying to use a SC-2024-RTD DAQ board to do 3 things (monitor two sensors (input) and control a small motor (output)) simultaneously. I have not been successful using labview for output. I can't even get it to show a voltage at the output pins.

I have it configured for voltage modulation, channel 0, and I am testing Ix0+ and Ix0-. To run it, I am right-clicking on the function and clicking "test". What's wrong?
thanks, Alex Millie
[email protected]

Ix0(+/-) are make the excitation current. You can see this in figure 4-1 in the user manual. You can see the output voltage from the MIO card by looking at the voltage from terminal 23 to terminal 20 (channel 0) and terminal 23 to terminal 21 (channel 1). You can see this pinout on page 3-5 of the SC-2042-RTD user manual.

Similar Messages

HT1296 I can't sync the songs from my computer to my ipod touch. I have gone through the iPod directions on this page and have not found them helpful. For example, I can't find the Autofill button. Can you help?

I can't sync the songs from my computer to my ipod touch. I have gone through the directions on the iPond help page and have not found them helpful. For example, I can't find the autofill button. Can you help?

I have already tried following those steps. I went back and tried to follow them again but they did not work. Some of my songs have synced, some have not. And I am still not seeing the Autofill icon on the bottom of the menu or anywhere else. I fear something has been corrupted here and I need to start afresh.

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. Can I go back to the older version? I had no trouble with that and I do not like this new version at all.

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.

I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.

HT1937 How can I get to use my phone? Much of it appears to be set up but when I try and make a call it tells me I have not been given access to this service

How can I get to use my phone? When I try and dial out it says: 'You have not been given access to this service'

Have you chacked with your carrier. The message you are getting seems to relate to a carrier issue and not something to do with the phone itself

Since updating my ipad 2 to ios6, I have not been receiving incoming emails from my yahoo account. I get the message I am not connected to the server. I have no idea how to fix it. Any suggestions.

Since updating my ipad2 to ios 6, I have not been receiving my yahoo email messages. I went into the yahoo account but the incoming section does not appear, only the outgoing mail. Any suggestions?

You may also want to just wait a day or so. There seems to be randomly persistent issues with yahoo mail. NO idea if it's totally tied to iOS6 or not, but Yahoo was having issues before the software upgrade. I went through 2 periods where my 2 separate yahoo accounts wouldn't download mail for about a day or so before it resolved itself.
I simply went to the main yahoo site, which puts me on the mobile site and accessed my mail via the web in the mean time.

TS4036 I cant use my ipad message appears saying not enough storage in icloud for backup but I cant even get on to my settings app...it won't let me do anything.....help please

I can't use my ipad it won't let me do anything or go to anything...a message appears saying not enough storage in icloud for backups so I got on my laptop and bought added storage for icloud and still nothing....someone please help

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the iPad again

My iMac PowerPC G4 will not connect to my Belkin N router. I have not been able to connect for so long that I actually gave up on this computer until today, so it is a little out of date software wise. It is running OS 10.3.9.

First off i apoligize for the title length, a bit new to help forums and didnt realize thats what that was .
Anyways;
My iMac PowerPC has been having this issue for quite a few years, prompting me to flat out replace it. I recently had a friend come to need a computer, and told them they could have it once i got it working.
The unfortunate problem that i luckily discovered: my friend and i use the same brand / model of Router, the Belkin N+ (N plus incase it removes the plus sign like it did in the title).
Ive tried everything i know, which isnt much. I've verified the password is correct, ive restarted the computer, and ive restarted my modem and router. Nothing works.
I should mention also that the computer is out of date program wise (obviously) since i havent been able to connect with it in so long. I am still using Internet Connect, and the computer still gives me the option to try .Mac.
Any help would be greatly appreciated.
Dean

The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

HT4623 I have an ipad 64G, model A1397 emc2424, IN NEED OF BEING RESTORED TO FACTORY ORIGINAL SOFEWARE. I HAVE NOT BEEN SUCCESSFUL IN RESTORING FROM ITUNES,IT RAN FOR 6DAYS RESTORING TO NO RESULTS. WHAT CAN I DO? ITUNES REPORTS THAT IS IS MI

I have been unable to restore my Ipad through Itunes. It stops once the software is removed and goes into transfering for restore, Itunes also
has notice that certain drivers are missing from down loads of Itune, which has been reload numerous times. What is my solution to this problem?

Has it EVER been jailbroken?

Firefox automatically updated on my home computer last week and I have not been able to log on to Firefox since. I get a crash notice immediately.

It always updates automatically but this time it seems that Firefox won't work at all now. I cannot log in to even send this to you. I had to come to work to do it so I don't have a crash ID here because I didn't know I needed it. I have only used Firefox for several years now and am upset that this update messed it all up.I used to use Thunderbird also (which I loved) but I have over 750 e-mails that can't seem to download (they downloaded from the server, but couldn't get into Thunderbird. The first message took over 10 minutes...so I don't use it either because all my messages line up after those 750. Nobody can seem to fix that either)

Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

HT204411 I just need to purchase a song that is not available in itunes country, its only available in the USA. Is there anything I can do as all my efforts so far have not been successful. Thanks

I am trying to purchase a song that's not available in the itunes South Africa. The song I am trying to buy is only on itunes USA. Is there anything that I can do because usually all I need to do is switch shops but it doesn't seem to be working on this particular song. Thanks

You need to be in a country to use its store, so unless you are in the US with a US billing address on your account then you can't buy from the US store - you can only use the South African store. You can try requesting that the song be added to the South African store, but unless the rights-holder agrees to it then Appl won't be able to sell it there : http://www.apple.com/feedback/itunes.html

Is it possible to sync two separate iPhones, using two separate itunes accounts on the same computer. Have not been successful so far.

We have two iPhones and two itunes accounts but one computer. The phones are 3GS but are new. I have had no luck in getting syncing the phones individually. I have called Tech Support. They sent me a link that I had already been to. This is more than frustrating.

http://support.apple.com/kb/HT1495

HT4972 I have tried to update ios on my ipad 2 but have not been successful. Help!

I have tried updating my ipad 2 to ios through itunes, i have the lastest version of itunes, but have been unsuccessful. Help!

Does "the latest version of iTunes" really mean that - iTunes 11.1.5, or is it some much earlier version because your computer's Operating System is too old to handle the current version?
If you are in fact running iTunes 11.1.5, please tell us the exact symptoms that occur when your iPad fails to update successfully.

HT1420 I can't deauthorise my daughter's last computer from iTunes because it has crashed. We have three computers in the house but I can't authorise my new MacbookPro for iTunes or homesharing. So I can't even get my music from my old Macbook into my new

I can't deauthorise my daughter's last computer from iTunes because it has crashed. We have three computers in the house but I can't authorise my new MacbookPro for iTunes or homesharing because it says I have 5 computers authorised (I don't). I can't even get my music from the iTunes library on my old Macbook onto my new one, because it won't let me sync my iPhone 5 with my old Macbook, as I can't update the iTunes software. So I have a new MacbookPro and a new iPhone 5 and I can't get any of my music on either of them. I feel singularly depressed.

As you have more than 1 computer authorised then you should be able to log into your account on your computer's iTunes (Store > View My Account) and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.

My iPod touch was recently stolen and I have been trying to find it on iCloud but sadly it has not connected to the internet at all so I have not been able to track it.What should I do?

My iPod touch was recently stolen and I have been trying to find it on iCloud but sadly it has not connected to the internet at all so I have not been able to track it.What should I do?

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

I am trying to use a SC-2024-RTD DAQ board to do 3 things (monitor two sensors (input) and control a small motor (output)) simultaneously. I have not been successful using labview for output. I can't even get it to show a voltage at the output pins.

Similar Messages

Maybe you are looking for