I am trying to write a tv script and the only options I have is for UK screenplay's. I would like to change this to US screenplay how do I do this?

I am new to the Adobe Story and would like to be able to select the option for US screenplay template when selecting tv script. I do not see this option. How do I get it to show up?
Thanks

Hi Elizabeth,
There are no U.S. screenplay templates, however, you can customize an existing template if you wish.
Here is a response from Adobe Story support about that: Re: Why are the TV script templates UK only?
In the new release of Story, there are improvements to customizing templates, as well: Adobe Story CC December 2014 release: What’s New
I understand that it would be much better to have some U.S. templates installed, so be sure to request that here: http://adobe.ly/feature_request
Thanks,
Kevin

Similar Messages

HT4759 I'm getting a lot of spam in my icloud account and would like to change my icloud email address, how can I do this?

After having a mac.com email for nearly 10 years I fell for a scam email and now am getting spammed daily in my email account. I use this email account for everything and would like to either block the spam emails - although that's hard since they change their email address daily - or just get a new icloud email address. I've researched this and have not found this easy. Any suggestions on how to change my icloud email account? Keep in mind all my devices are connected through this email including iTunes. Any help is appreciated - thanks!

To get a new iCloud address you would have to create a new iCloud account and migrate your iCloud data to the new account. If you want to do this, go to Settings>iCloud and tap Delete Account, and when prompted about what to do with the iCloud data choose Keep on [My iDevice]. Then set up a new iCloud account with a new ID, turn you iCloud data syncing back to On, and when prompted choose Merge to upload your data to the new account. When you turn Mail to On you will get a new @icloud email address (@mac and @me addresses are no longer available). Once your data is in the new account, you can just delete the old account from your other devices without saving the data on the device, then sign into the new one and the migrated data in the new account will be synced back to them.
If you need to, you can change your iTunes ID to this new email address. This guide explains how to change an Apple ID name, but you can follow this and edit the primary email address instead to change it: http://support.apple.com/kb/HE40.

I HAVE A MAC NETWORK WITH A HP LASER-JET AND EVERYTHING IS WORKING FINE. I ALSO HAVE A WINDOWS BASED MACHINE THAT I WOULD LIKE TO PRINT TO AS WELL. HOW CAN I ACCOMPLISH THIS?

I HAVE A MAC NETWORK WITH A HP1200 LASER-JET AND EVERYTHING IS WORKING FINE. THE PRINTER IS CONNECTED DIRECTLY WITH ONE OF MY MAC-MINI"S. I NOW HAVE A WINDOWS BASED PC AND WOULD LIKE TO PRINT TO IT AS WELL.. HOW CAN I DO THIS?

Make sure that you Printer Sharing enabled on the Mac Mini. System Preferences > Sharing > Printer Sharing
Do the same on the PC
On the PC, try downloading and installing Bonjour Print Services for Windows v2.0.2
Run the application on the PC to see if it will discover your printer and install the printer.

I want to copy presentations and brochures from my Mac pro to iPad. In iPad I would like to save these in iBook. How should I do this?

I have both Mac Book Pro and iPad. There are some brochures and presentations related to my work in mac Book pro, which I want to transfer to iPad.

Or install Adobe Reader in the iPad and use that instead to view PDFs. Once installed, you can transfer PDFs between the two devices using iTunes on the Mac. Go to the iPad's Apps section and you will find a File Sharing section thru which you can move the PDFs.

HT1918 Trying to make make account changes to my itunes account. Receive error message regarding province "enter at most 3 letters" when the only option I have is to select from a drop down menu. Cannot make changes to my account. How do I get this fix

As you can tell, this is my first post
I am attempting to make changes to my itunes account, but when I hit done, an error message "enter at most 3 letters or numbers for province" appears. I have not attempted to make any modificaitons to this field. The only options I have for data in this field are picked from a drop down menu. I have no idea why this msg is appearing. Any ideas on why it is showing up? Thanks.

There seems to be at least one package that can't be located. See the message below from you log file
Requesting locations synchronously for content SDC00003.2
with priority Medium ContentAccess 4/3/2015 1:30:51 PM 2644 (0x0A54)
The number of discovered DPs(including Branch DP and Multicast) is 0 ContentAccess 4/3/2015 1:30:51 PM 2644 (0x0A54)
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Trying to get PS-Elements 13 licensed; the only "numbers" I have are the ones on the back of the box

trying to get PS-Elements 13 licensed; the only "numbers" I have are the ones on the back of the box

Got it...had to rip the packaging apart ..who would have thunk !!!ThanksIndy
From: Little_Pale_Face <[email protected]>
To: Indy Mangat <[email protected]>
Sent: Monday, March 9, 2015 8:22 AM
Subject: trying to get PS-Elements 13 licensed; the only "numbers" I have are the ones on the back of the box
trying to get PS-Elements 13 licensed; the only "numbers" I have are the ones on the back of the box
created by Little_Pale_Face in Photoshop General Discussion - View the full discussionIs there not a plain white box inside the outer box - the serial number is usually on that. Serial number is 24 digits starting 1057 Brian If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7268188#7268188 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7268188#7268188 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop General Discussion by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.

Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.

Hi,
I had never heard of someone using the iPhone Number as the ID in the iMessages account in the Mac version.
i.e without adding an Apple ID
iMessages does allow iPhone numbers and mine lists mine.
I would try this.
Sign Out of the iMessages account and Quit Messages
On the iPhone in Settings > Messages remove the Apple ID
Set the iPhone to Airplane mode for a few minutes (to break with the Server)
On starting the phone up again check the iPhone Number is ticked for iMessages.
If it is add the Apple ID
On the Mac restart Messages
Add the Apple ID
At this point you should get a pop up or two saying the iPhone is using the Number and Apple ID.
Accept these and they get added to the Receive At list and Send From drop down.
9:41 pm Monday; October 28, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have a photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere? Noooooo i just want to delete it from camera roll!!!!!

I have the same photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere? Noooooo i just want to delete it from camera roll!!!!!

The way that I understand that it works, is that the photos are not copied into the new albums, instead it just points to the photos - the number of photos on the iPad in Settings > General > About doesn't increase when you create new album so I assume from that that it isn't copying the photo, just pointing to it. So if you delete the photo from the camera roll you will therefore also be deleting all the pointers to it

Everytime I attempt to open iPhoto, a message comes up saying, "iPhoto is unable to open this library," and the only option if gives is to quit. How do I get it to open?

When I select iPhoto to open the application, a message comes up saying, "iPhoto is unable to open this library," and the only option available is to quit. I don't know what library iPhoto is attempting to open, but all I want to do is just start iPhoto over from scratch.

Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' to find out what Library is in question. Use the 'Create Library' option to make a new one.
To try and repair the damaged one:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I have many CD's that I would like to download on my iPod. How do I do this?

I have many CD's that I would like to download on my iPod. How do I do this??

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

My wife has an original iPad and would like to print her contact list. How can we do this?

my wife has an original iPad and would like to print her contact list. How can we do this?
[email protected]

Make groups of contacts in your Address Book and select the option to sync only selected groups to each phone.
This explains how to create groups: Mac 101: Address Book, http://support.apple.com/kb/ht2486

Trying to reinstall OS X Lion but the only option is to reinstall OS X mountain lion is there a way around this?

I recently formatted my hard drive so that I could give my computer to my brother but when I was trying to reinstall OS X Lion (10.7) the only option that showed up was to reinstall OS X mountain lion which I do not have, so now I can't get past the menu that comes up when you hold command + C. How do I reinstall to OS X Lion when it isn't even an option that shows up

Ok, well, having had Snow leopard on it originally solves the question: the license for Lion (or Mountain Lion for that matter) is not transferable. You are required to erase the drive and reinstall the original OS (Snow Leopard). Giving or selling it with Lion (or ML) on it will not be helpful for the recipient because the machine ID and their Apple ID will no longer match so they will not be able to get updates.
Have you checked your Purchases section at the app store? Here is what shows on mine:
If you are using the recovery mode and Mountain Lion comes up, then I can only assume that this is what you purchased. I don't know why it would show up otherwise.
As far as selling your Mac, the above is irrelevant since you will need to reinstall Snow Leopard and the recipient will need to purchase Lion (or Mountain Lion) using their own Apple ID.
However, you need to check on this since you may want to download Lion again for another machine of yours. So, if you are sure you purchased Lion and nothing shows under your Purchases at MAS, I would either call Apple or make an appointment with your nearest Genius Bar to get it sorted.

I am trying to connect to a network but keep getting a message saying "Unable to join the network' and the only option is dismiss, what can I do?

I am trying to connect to a network on my ipad but keep getting a message saying " Unable to join the network" and the omly opion is dismiss.....Can anyone help me find out what is wrong please?

Have a look at this may help
http://www.apple.com/uk/support/ipad/wifi/
Are you refering to a home network or some form of public
if home network ensure your router has latest firmware and try rebooting it

I am trying to restore my catalog having previously done a back up to an external hard drive and subsequently an incremental backup. I am using Photoshop Elements 11 and the only option given in the restore procedure is to open a .tly file.

I have done this but now the restore function is asking for yet another file, which i assume to be the original back up, but that is the only .tly file since the only other relevant file appears to be called catalog.buc but that is just not visible when using the restore function? How do I continue from here with this restoration of my catalog?

Martin_Had a écrit:
Thank you Andaleeb. I appear to have an old backup of a year ago, and a more recent full back up plus an incremental backup.
Regrettably I don't really understand what is going on because firstly the restore does not complete its cycle so I cannot see what that backup file contains and secondly all I have read would suggest that the .tly file is the full backup and the catalog.buc file is the incremental backup. For the present, the catalog shows the photos for 2014 which makes me think I might have backed from the old back up file.
I am minded to create another catalog and try again.
Any views on what I can do?
A backup (full or incremental) is a folder, not a file. It contains renamed pictures file copies as well a copies of the files and subfolders of the original catalog. The catalog.buc is a renamed copy of the database of your original catalog while the backup.tly. That backup.tly file contains the information to restore the renamed pictures where you decide, the original location or a new custom one. You can't do anything with the backup yourself, only the restore process can do the job if it finds the backup.tly file. In the case of an incremental backup, you have to tell the restore process where to find the incremental backup folder; it finds the backup.tly file in that folder and finds what is to restore there; then it asks you for the previous backup folder (in your case the full backup); you then browse to that full backup folder so that the restore process can find find the backup.tly there; the restore then deals with the rest of the files to restore.

I am trying to write a tv script and the only options I have is for UK screenplay's. I would like to change this to US screenplay how do I do this?

Similar Messages

Maybe you are looking for