I am unable to access my Backup even from Icloud

Please help.  It looks like I might have lost everything from my Iphone inculuding all backups

Hello, Indra!! The Tiger.
Thank you for visiting Apple Support Communities.
I would need clarification on what you mean by you are unable to access your Gmail account to better assist you.  However, here are the best two articles to go through when experiencing issues with a Gmail account on an iOS device.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Cheers,
Jason H.

Similar Messages

  • Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.

    Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
    How can I recover the NAS back up to put on my new Time Machine.
    Talking to Apple Support Adviser was a waste of time on case number 239647273
    Any thoughts or pointers?

    Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
    You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
    Apple AirPort Time Capsule Support
    Lion Communities
    Cloning as a Backup Strategy
    Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
    Others who are asking the same question:
    http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

  • I have been using yahoo mails from iPad for several months. Today I am unable to access my mails even though I logged in to yahoo....the signin screen is keep coming when I tried to access mail.....is it due to iPad or yahoo?

    I have been using yahoo mails from iPad for several months. Today I am unable to access my mails even though I logged in to yahoo....the signin screen is keep coming when I tried to access mail.....is it due to iPad or yahoo?

    It sounds like you might need to contact Yahoo! if you aren't able to setup your email account as a new account after deleting it. 
    I found some links on the Yahoo! website that might help:
    http://help.yahoo.com/kb/index?page=content&id=SLN4138&locale=en_US&y=PROD_MOBIL E
    http://help.yahoo.com/kb/index?locale=en_US&y=PROD_MOBILE&page=content&id=SLN261 7

  • Unable to access LAN behind RV042 from QUICK VPN Client once it connects

    Hi,
    Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
    Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
    What's the problem in configuration? What i have to do?
    Thanks
    VC Gundapaneni

    Hi There.
    have a look over here.
    http://www.linksysinfo.org/index.php?threads/netbios-issues-with-vpn.16170/

  • All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, macbook pro). I am able to access from my husband's HP windows laptop and from a Mac computer at the college.

    All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, Macbook Pro). I am able to get access from my husband's HP windows laptop and from a Mac at the college. Any ideas?

    http://support.apple.com/kb/HT5621
    In short, you have a problem we can't solve.
    I suggest you contact Apple support and make an appointment to get help.  Expect to pay for it.

  • HT1933 I am unable to access my apple account from my iPad... What could the problem be?

    am unable to access my apple account from my iPad... What could the problem be?

    What happens when you try to access it, and you how are you trying to access it ? If you are getting an error message then what does it say ?

  • HT4623 I am unable to access the internet even though my wi-fi signal is strong. It circles then times out. I can't even check for software updates. It tells me "Unable to Check for Update, an error occured while checking for a software update" What can I

    Help! I have an older iPad. I am not sure which version. I cannot access the internet even though it shows a strong Wi-Fi signal. I have tried re-starting and when I tried to search for updates I couldn't access. It told me an error had occured. What can I do? Thanks!

    Me too having the same thing what's the solution for this how can I update

  • Why am I unable to access iphone backup on iBook OSX 10.4?

    My old 3GS phone has a backup on my mac. My new phone can't access the backup because the phone is demanding 10.5.... This is the Intel build, correct? Luckily my backup on my PC was available (thanks Mr Gates). Is there a way around this blot on Apple's escutcheon?

    Leopard - 10.5 can be installed on a Mac with an Intel or Power PC processor that meets the minimum system requirements. The iPhone 4 requires a Mac running 10.5.8 or later.

  • Unable to access Component Controller attributes from Views.

    Hi,
      I am unable to access the attributes in component controller from methods in View even by using WD_COMP_CONTROLLER.
    Say, I want to access the attribute G_FLAG in component controller from a method in the View Controller by the following code :
      WD_COMP_CONTROLLER->G_FLAG = 2.
    Then an error message is showing up saying -  Field G_FLAG is unknown. It is neither in one of the specified tables nor defined by a DATA statement.
    What should I do? Plz suggest..

    Hi,
    Please check the Public check box of the attribute in the component controller.
    Hopefully it will solve your problem.
    Thanks

  • Unable to access TC hard disk from PC

    I have been unable to access the TC wireless and hard disk from my PC. I have both a Mac and a PC...the Mac works fine. I'm not using the TC to access the internet I just want to use it for back up and file storage for now. The message i get from the pc when i try to access the airport disk is "could not connect to the disk. Make sure NetBIOS is enabled and try again (53)."
    I have tried to add the IP Address to my Norton software, I have even disabled Norton and that didn't help. I have tracked down the secret location of the NetBIOS and made sure it was enabled...but i get the same message.
    Anyone have any other ideas? I love the TC for MAC but i need it to work for both systems or I'm going to have to take it back! Please help!

    Ok...I stumbled onto the solution after being told by several people to have windows rebuilt and almost charged $130 from Dell Tech Support!
    While attempting to share files from my Dell to back up on my Mac in order to reformat windows...yea it was getting to that point...Windows had me run the network setup wizard. During the set up there is a "file and printer sharing" choice to make and the default is of course "turn off file and printer sharing" which is of course the key to accessing the TC.
    I did complete the setup for a new network, renaming the workgroup and making sure the other settings jived with all the TC settings I have thrashed through for nearly two weeks.
    I hope this saves someone a little time and a lot of frustration. Thanks to all the other posts about this issue, it was good to know that other people face the same type of problem and there were a million ways around it.

  • I'm unable to access the Itunes Store from my Windows 8?

    I recently recieved a new laptop, operating on Windows 8.  {Note: This is my first Windows computer, I transferred over from Mac}.  I decided to open up a new Apple ID to get away from my parent's account, so that was all set up pretty easily. 
    Now, however, i find that I can't access the Itunes store from the Itunes application. 
    A message, I'm unable to find it now, it no longer appears, instead I get a blank screen instead of the store, read something similar to "not being able to open itunes store, please check your cookies and account details. {sorry if that's too vague, but it definitly had to do with my cookie settings making it unable to open.}
    I'm at a loss at what to do next.  My account is perfectly set up, but where and how to adjust the cookies so that the itunes store can open? 

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Unable to access Oracle VM Manager from browser

    Hi,
    I am unable to access the Oracle VM Manager from my browser at any of the url's e.g. /em; /OVS; /apex
    I can connect to my server via putty, so I know the IP address that I am using is correct.
    In the /var/ovm-manager/oc4j.log file I get the following message:
    ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
    The oc4j service is running and the ovs-agent service is running but I cannot connect.
    I am new to Oracle VM and Linux for that matter so it is entirely possible that something is not configured correctly somewhere
    I'll appreciate it if anyone can assist
    Thanks

    Try this command from the console or SSH to the server:
    service iptables stop
    If you can then access the URLs you will need to modify iptables to allow port 8888
    I think this is the command:
    iptables -I INPUT -p tcp --dport 8888 -j ACCEPT
    then:
    service iptables start
    Then try to connect again.

  • X61s - unable to access Rescue and Recovery from boot

    Is there any other way to access the R&R from boot? and what's the unattend answer file anyway?
    I'm trying to go to rescue and recovery from boot because my windows wouldn't load.
    It shows this message: "Windows could not parse or process unattend answer file [C:Windows\Panther]unattend.xml]. The answer file is invalid"
    I want to reinstall windows anyway so I tried going to the R and R page from boot: pressing the Thinkvantage button when it say "to interrupt normal setup... etc." I pressed the button and the message disappears, but it doesn't lead to the R & R page, it just starts windows normally. F8 leads only to more options of loading windows, like safe mode, etc. but non of them works because of the "unattend answer" file.
    How do I go to R&R if not through the thinkvantage button?
    What is unatend answer file anyway?

    Hi,
    RnR is not located in %programfiles%\ThinkVantage
    RnR is located in : %programfiles%\Lenovo\
    What is the way, how you want to do the backup? Using a rrcmd file or using the basic RnR GUI ?
    Rgrds

  • Unable to access Custom UDTs returned from a Java Stored Procedure

    Hi,
    I have a UDT in the DB :-
    create type contactrecord as object (
    CN_ID NUMBER(8),
    CN_TITLE VARCHAR2(40),
    CN_FIRST_NAME VARCHAR2(25)
    and this is the corresponding java class ContactDetails.java that maps to this UDT, that I loaded in the Aurora VM.
    package package1;
    mport java.sql.SQLData;
    import java.sql.SQLException;
    import java.sql.SQLInput;
    import java.sql.SQLOutput;
    public class ContactDetails implements SQLData
    private String sql_type;
    private long CN_ID;
    private String CN_TITLE;
    private String CN_FIRST_NAME;
    public String getSQLTypeName() throws SQLException
    return this.sql_type;
    //implementation of readSql
    public void readSQL(SQLInput stream, String typeName) throws SQLException
    sql_type = typeName;
    CN_ID = stream.readLong();
    CN_TITLE = stream.readString();
    CN_FIRST_NAME = stream.readString();
    public void writeSQL(SQLOutput stream) throws SQLException
    stream.writeLong(CN_ID);
    stream.writeString(CN_TITLE);
    stream.writeString(CN_FIRST_NAME);
    //getters and setters for the class vars go here.....
    There is another class A.java that has a java stored procedure/function, which I loaded into the Aurora VM
    Here is the class.
    package package1;
    public class A
    public static ContactDetails returnObject(String name )
         ContactDetails cd = new ContactDetails();
         cd.setCN_ID(1);
    cd.setCN_FIRST_NAME(name);
    return cd;
    Then I declared the call spec for A.returnObject() as
    FUNCTION returnObject(name varchar2) return contactrecord
    AS LANGUAGE JAVA
    NAME 'package1.A.returnObject(java.lang.String) return package1.ContactDetails';
    Then I tried to call the function returnObject through JDBC calls from a class in another VM.
    When I access the object returned by the function, I get a null object.
    Here is the Client code:
    CallableStatement cs = null;
    ResultSet rs = null;
    try
    cs = conn.prepareCall("{ ? = call returnObject(?) }");
    java.util.Map map = conn.getTypeMap();
    map.put("ADMIN.CONTACTRECORD", Class.forName("package1.ContactDetails"));
    conn.setTypeMap(map);
    cs.registerOutParameter(1, OracleTypes.STRUCT, "ADMIN.CONTACTRECORD");
    cs.setString(2, "John Doe" );
    cs.execute();
    ContactDetails cd = (ContactDetails)cs.getObject(1);
    System.out.println("contact first name is:-"+cd.getCN_FIRST_NAME()); //Null Pointer here..cd is null....:(
    if (cs != null) cs.close();
    catch(Exception e)
    e.printStackTrace();
    Although If I try to access the same function from a pl/sql block, I am able
    to access the contactrecord fields.
    What could be wrong ..???
    I could not find any error with the object mapping, as it works perfectly when I interact directly from my VM to the DB,
    without going thru the aurora VM.
    I am using a OCI driver to connect to the DB via JDBC.
    Thanx in advance for any help at all.
    -sk

    Shahid,
    I too have had bad luck in many cases with the automatic translation of Java types to PL/SQL and back. I think the SYS package on the PL/SQL side which handles some of the conversion is DBMS_PICKLER (there are equivalent Java classes which do the same in that world and seem to execute automagically when a conversion is needed). You might want to double-check the data type mappings against the DOC on OTN to make sure they map 1-1. Also make sure the permissions are granted against your objects to whoever is executing them, etc. Very often, I've resorted to passing simple scalar types between the two languages as in some cases the results with complex types are inconsistent.
    Sorry this isn't much help,
    -Dan
    http://www.compuware.com/products/devpartner/db/oracle_debug.htm
    Debug PL/SQL and Java in the Oracle Database

  • I am unable to access my sync key from firefox on my xoom, can you send me the key?

    I am unable to sync my firefox bookmarks to my moto bionic, I setup sync to my xoom and am unable to retrieve the sync key from firefox on xoom. There is no option to manage my account in the sync prefs.

    The sync key is listed in the Saved Passwords which can be found at https://support.mozilla.com/en-US/kb/Options%20window%20-%20Security%20panel it will be listed as chrome://weave (Mozilla Services Encryption Passphrase) then click the show passwords button to view the sync key.

Maybe you are looking for