I am unable to access my RBS digital banking site - the help message from the bank suggests it could be a Firefox add-on problem

Just changed from Internet Explorer to Firefox - could initially access digital banking but now unable to log in. Bank suggests the problem is due to Firefox add-ons & to start Firefox in safe mode. How do I do this?

Click here -> [[Troubleshoot Firefox issues using Safe Mode|Troubleshoot Firefox issues using the Firefox Safe Mode]]

Similar Messages

Unable to access Web Method after deploying into the server

Hi,
I'm Unable to access Web method after deploying into the server.
My Web method is
[WebMethod]
[ScriptMethod(ResponseFormat = ResponseFormat.Json )]
public object getOwners()
DataTable dt = _qbObj.returnDDLData("employeedetails", "EmpID", "EmpFirstName");
if (dt == null)
return new { Result = "Error", Options = "Error getting data" };
string[] strAttributes = { "ID", "Name" };
string[] strColName = { "EmpID", "EmpFirstName" };
List<SolOwners> lstObject = convertToList(dt, strAttributes, strColName, new SolOwners());
var owners = lstObject.Select(c => new { DisplayText = c.Name, Value = c.ID });
return new { Result = "OK", Options = owners };
When I.m accessing that method after deploying into server, I got following error.
System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: <>f__AnonymousType9`2[System.String,System.Collections.Generic.IEnumerable`1[<>f__AnonymousTypea`2[System.String,System.String]]] cannot be serialized because it does not have a parameterless constructor.
at System.Xml.Serialization.TypeScope.GetTypeDesc(Type type, MemberInfo source, Boolean directReference, Boolean throwOnError)
at System.Xml.Serialization.XmlSerializationWriter.CreateUnknownTypeException(Type type)
at System.Xml.Serialization.XmlSerializationWriter.WriteTypedPrimitive(String name, String ns, Object o, Boolean xsiType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write1_Object(String n, String ns, Object o, Boolean isNullable, Boolean needType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write71_anyType(Object o)
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
--- End of inner exception stack trace ---
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
at System.Xml.Serialization.XmlSerializer.Serialize(TextWriter textWriter, Object o, XmlSerializerNamespaces namespaces)
at System.Web.Services.Protocols.XmlReturnWriter.Write(HttpResponse response, Stream outputStream, Object returnValue)
at System.Web.Services.Protocols.WebServiceHandler.WriteReturns(Object[] returnValues)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()Please help me to solve that issue.Thank you.

Hi Vani,
What project are you developing? According to your code looks like an Asp.Net application? Am i right?
If so , please repost in ASP.Net Forum
http://forums.asp.net for more efficient responses.
This forum is discuss problems of C# development.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT1414 I have the iphone 4s, I'm unable to access my calender while talking on the phone??

For some reason I'm unable to access my calender while talking on the phone, if I want to check dates and times to input appt. I beieve it might have happened after the latest software update, has anyone else had this problem???

Please change your profile then, it says iPhone 4S, IOS 6.1.4.
Is your Calendar in iCloud? Which provider are you using?

Unable to access tools in PS CS6...Help!!

In Photoshop CS6, when I open the program, I am unable to access the tools. I will not allow me to change from the hand tool. Cannot zoom, cannot move with the hand icon that pops up. I have restarted the program many times. Using a Macbook Pro, 10.7.5

Then I would reset the preferences. Start PS and immediatly hold down the cmd option and shift keys. If fast enough you will get a reset window.

HT5624 I was prompted to update to ios7 so I did as usual. But this update has made my ipad a piece of junk. I am unable to access Siri, I can't read the faint print particularly those tiny letters on the top row which show the visited websites, etc.

I updated to iOS 7 last might after being prompted by Apple. This caused me to lose many useful features of my iPad2. First I find that Siri has disappeared. When I contacted Apple support, the guy who took my serial # and model # verified things on his end and said emphatically that I should have Siri, but could't help me find it. Another rep simply disconnected me after seeing that she was unable to help me with the problems. After wasting hours with these people and waiting several minutes for their promised supervisor to come online, I was again disconnected by them. My second major problem I wanted solved was the hard to read fine and faint print. I don't have good eyes and with iOS 7 on my iPad2 I am now unable to read the top row which has the list of websites in avery faint and fine print. I could read everything on my iPad until yesterday evening when I made the mistake of updating to iOS7. Till yesterday evening I loved my iPad but after that update to iOS 7 last night it is a piece of junk for me. Hope there is help somewhere out there to restore Siri and other useful features of iOS 6 or get iOS6 back on my ipad So I can use it again. The chat with apple support has not helped at all as they themselves did not know that Problems like the ones I mentioned to them even existed with this iOS 7. I want my iOS 6 back!!!! CAN ANY ONE HELP !!!!! Also how can I reach anyone in Apple who is knowledgable and also has some authority to do something about it.

Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Can anyone explain why, every few weeks or so - itunes on my iMac simply screws up and is unable to access my library - insisting on downloading the latest version of iTunes (already installed, by the way)?

This means that I have to recover my apps form my iphone - I can do that and then recreate ALL of my playlists. Labourious and extremely irritatating.
I suspect, that itunes is just another flakey product - more trouble than it's worth. Unfrotunately, we are stuck with it if wanting to use iPhones, ITouch etc.
It would appear that the only way to backup up playlists form iTunes is to do them individually - ludicrous. Is there anything out there that cn back ALL playlists in a stroke?
Cheers!
Mike

HERE IS MY DIAGNOSTIC:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 3000
iTunes 7.3.2.6
Current user is an administrator.
Network Adapter Information
Adapter Name: {75765750-A9FB-4685-8688-96D3CA13D942}
Description: NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter - Packet Scheduler Miniport
IP Address: 192.168.1.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Aug 28 10:18:21 2007
Lease Expires: Wed Aug 29 02:12:07 2007
DNS Servers: 192.168.1.1
Adapter Name: {610BB6CB-6C57-4006-A839-86E3E4CAEDC2}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Aug 29 02:12:07 2007
Lease Expires: Wed Aug 29 02:12:07 2007
DNS Servers:
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection could not be made.
Connection attempt to iTunes Store was unsuccessful.
The network connection could not be made.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection could not be made.

Unable to access web pages by typing in the IP address in the address bar?

I hooked up a HP 7520. HP was walking me through some set up options and they asked me to type in the IP address 10.0.1.3 into the addrss bar to bring up the web page. Page remains blank or I get the Safari can't connect to the server. HP stated it was an issue with the setting on the Airport Express. What should the setting be in order for the IP address to load?

10.0.1.3 is a local network IP address. I am assuming that is the IP address of your HP 7520. Since this is a local address there is no additional settings on the AirPort Express that you can make.
I am assuming that you have your Express in its default mode. That is, it is acting as in wireless router and that it is connected directly to your Internet modem ... correct?
If so, your Express will hand out local IP addresses in the 10.0.1.2 to 10.0.1.200 range. Note that this is a dynamic address. The provided IP addresses may change over time which is what I think has happened in your case. By that I mean, you HP received a new IP address and why you can find it in the web browser at 10.0.1.3.
What I would recommend that you do is assign a "static" local IP address to the HP. You can do this using the AirPort Utility. Specifically, you want to set up a DHCP Reservation for this device.
To do so:
Run the AirPort Utility.
Select the AirPort Express, and then, select Edit.
Select the Network tab.
Under DHCP Reservations, click on the plus button.
For Description, enter: HP 7520 or anything else you like.
Reserve Address By: MAC Address
MAC Address: Enter the MAC Address of the HP. This would either be the HP's Ethernet or wireless address whichever is appropriate on how you have it connected to the network.
IPv4 Address: Choose an IP address between 10.0.1.2 & 10.0.1.200. This will be the IP address that you will reserve for the HP.
Select Save.
Select Update and allow the Express to restart.

HT1430 unable to access "sound" and "lock rotation" at the same time. If "sound" is on device will not rotate, and vice versa

If "sound" is on device will not rotate, and vice versa

You can have both, the Settings > General > Use Side Switch To setting is only setting what the small switch on the side of your iPad, above the volume switch, controls i.e. either rotation lock or notification mute - the function that isn't being controlled viat the switch on the side of your iPad is set via the multitasking bar in iOS 6 and below, control centre in iOS7 : http://support.apple.com/kb/HT4085
iOS 6 and below : double-click the home button to open the taskbar; slide from the left; and it's the icon far left; press home again to exit the taskbar
iOS 7 : swipe up from the bottom edge of the screen to open control centre and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off').
So to have both mute and rotation 'off' you need to have both the switch on the side of your iPad 'off', and the icon on taskbar/control centre 'off'

User unable to access OWA

User is unable to access OWA any pointers.. getting the below error pls Thanks
The item can't be opened because it's become corrupted.
Request
Url: https://ukexchange.abc.com:443/owa/lang.owa
User: Wes, Aurélia
EX Address: /O=abc/OU=London/cn=Recipients/cn=AWes
SMTP Address: [email protected]
OWA version: 14.3.123.3
Exception
Exception type: Microsoft.Exchange.Data.Storage.CorruptDataException
Exception message: Can't save invalid object Wes, Aurélia.
Call stack
Microsoft.Exchange.Data.Storage.ExchangePrincipal.Save()
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchLanguagePostLocally(OwaContext owaContext, OwaIdentity logonIdentity, CultureInfo culture, String timeZoneKeyName, Boolean isOptimized, String destination)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchLanguagePostRequestFromProxy(OwaContext owaContext)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.PrepareRequestWithoutSession(OwaContext owaContext, UserContextCookie userContextCookie)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.AcquireAndPreprocessUserContext(OwaContext owaContext, HttpRequest request)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.InternalDispatchRequest(OwaContext owaContext)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchRequest(OwaContext owaContext)
Microsoft.Exchange.Clients.Owa.Core.OwaRequestEventInspector.OnPostAuthorizeRequest(Object sender, EventArgs e)
System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Inner Exception
Exception type: Microsoft.Exchange.Data.DataValidationException
Exception message: The property value Aurélia Wes is invalid. The value can contain only 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H',
'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '"', ''', '(', ')', '+', ',', '-', '.', '/', ':', '?', ' '.
Call stack
Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
Microsoft.Exchange.Data.Storage.ExchangePrincipal.Save()

Hi,
We can use the New-MailboxRepairRequest cmdlet to detect and repair mailbox corruptions. For more information about it, please refer to:
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

I am trying to install IOS 8 on my iphone 5 using ITUNES..it says memory full. I am unable to access my phone!

Hello,
I am trying to install IOS8 on my iphone using ITUNES and I am unable to do it. After following the entire process at the end it says that the memory is full and I am automatically disconnected. I am also unable to access my phone, when I turn the phone on it appears a red itunes button together with a charger.
Please help me..
Thank you very much!

Hello,
You'll need to install Flash Player 10.3.183.90, the last version supported for OS X 10.5.8. Download the archive zip file, http://download.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive.z ip, and extract the contents. Then navigate inside the 10_3_r183_90 directory and use the file named flashplayer_10_3r183_90_mac_intel.dmg.
Maria

I am unable to access my AOL (netscape) mail suddenly - I follow aol's suggestions and still cannot access my email account (although I am able to change password, etc)

I am unable to access my aol (netscape.net) email account. I followed aol's suggestions and still cannot get my emails. I am able to change my password and account settings though

If you use iCloud as well, you can try adding it back to your accounts as well. I have 7 email accounts (including iCloud and a Yahoo account) in mail on my iPhone and iPad and have no problems with them. I suspect it was not removing iCloud that fixed your problem, it was the re-entering the Yahoo account login credentials (maybe they just got corrupted - could be as simple as that).
If you do add iCloud back, and it causes problems right away with your Yahoo, then you should send a ticket in to the iCloud support folks as that would seem to be something not working correctly?
http://www.apple.com/support/icloud/
Also if you actually deleted the iCloud account, remember you can keep the account, and just disable it for mail in the iCloud settings (so you can keep using iCloud for other features even if you do not want to use iCloud mail).

Unable to access account (possible hijacking?)

A few days ago I was unable to access my main skype account. The password recovery system straight up does not work, saying my email has no account associated with it. When I tried making a new account with that email, though, it said the email was already in use.
No amount of password recovery will help me with my issue, as it's just stuck in a robot loop. If I could talk to a human being about this, maybe I could get my account back. Please help.
[Messaged edited by moderator to remove private information]

It's been a full week now and this problem isa still not solved. None of the help that mod Claudius has given gets me any closer to an solution.

Unable to access following end point(s)

Hi All,
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.

Hi karan,
Thank you very much for your reply to my question.I will also try to change the message size by informing my client SOA admin people according to you.
Regarding the scenario that you are asking , I already mentioned clearly above(When I first posted this question).Anyways I am again copying those details below:
Starting of Scenario explanation:
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.
ending of Scenario explanation:

Unable to Access Emails or delete Existing account

I changed by password about a week ago and unable to access email or delete existing account.
Error message in Edit Account screen " Your login information for account (Yahoo) has changed or is incorrect. Update your login information and try again."
Whenever I try to delete account this is the error message am getting "There was an error deleting your account."
Help!!!!!!!!

Change the password in Yahoo! again, to something simple, and then try updating the password on the device again.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

HT2478 Suddenly my screen went large, unable to access right of screen

My screen went too large, unable to access left of screen

You're in the Tiger forum. Next time you can go here. For now, try holding down Cmd or Option (alt) and scrolling down with the mouse.
Also Cmd-Option - (hyphen key) or the + key to zoom in.
Also, System Preferences>Universal Access>Seeing. Turn off zoom.

I am unable to access my RBS digital banking site - the help message from the bank suggests it could be a Firefox add-on problem

Similar Messages

Maybe you are looking for