I am unable to change either the tab order or bookmark order in FF 8.0.1.

Recently, I discovered that I could not change the order of the tabs after I'd opened them. I also cannot change the order of the bookmarks or their folders (this started at the same time, so I think this is a related issue). This started less than a week ago.

That issue can be caused by the Torbutton extension
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

Firefox 4 is stuck in classic mode. I went to the Add-on's and tried to change it, its the same no matter what I do, the only thing that changes is the tabs. Help.

I downloaded Firefox 4 because it looked great at school, it doesn't look the same I believe its stuck in classic mode. I went to the Add-on's and tried to change it, its the same no matter what I do, the only thing that changes is the tabs. Help.

To get the new interface you need to hide the menu bar. To do that in the View menu select Toolbars, then click on the "Menu Bar" entry. If you had applied customizations to the menu bar whilst using Firefox 3.6, the new version would by default use the old interface.
If you need access to the menus you can press either Alt or F10 to temporarily display them.

HI,I am unable to see all the tabs in ACC, getting the following error

I am unable to see all the tabs in ACC, getting the following error.
ERROR [ComponentAgent] Request for URL:
http://sathya-PC:8080/dyn/init-session did not return a valid session.
Please check your settings for siteHttpServerName, siteHttpServerPort,
webApplicationPrefix and initSessionURL for component
/atg/devtools/DevSessionManager/_2/atg/devtools/ComponentAgent
serverport : 8860
servername : localhost
Note:I included DCS in Manifest and Run the DCS in SQL
Please Help me out from this issue
Thanks

Verify and chage if required.
Ports are configure at /atg/dynamo/Configuration component,
httpPort , httpsPort , drpPort , fileDeploymentPort , rmiPort , fileSychronizationDeploymentPort , adminPort , siteHttpServerPort
Noramly :
siteHttpServerPort and adminPort: app server port
Thanks,
Nitin.

Will not load gmail or ebay pages in full and the tab to save bookmarks is gone I was going to delete it and re install but I dont want to loose my book marks

will not load gmail I have to use html but will work in windows exploder and chrome
https://mail.google.com/mail/?hl=en&shva=1#
and ebay does not load in full looks like it did 10 years ago
the tab to export my bookmarks is gone so I cannot delete it and re install it
I have used fire fos for years and feel it is vastly superior please help

Ok Guys and gals, Here is a CLUE ! I have the same problem as listed above. Here is the clue, but I don't know how it figures into the scheme of things.
I have 2 users set up for my vista OS. The admin user, Fire fox 6.02 works fine. The second user is my name and its fire fox 6.02 is screwed up. I can load Gmail, yahoo, Boost mobile and others in the second user login. But if I log in as Administrator the Fire fox is fine. Fast, clean and stable.
So Some how my settings in the user #2 is or has corrupted and or changed ! I didnt do it, Firefox somehow changed the settings or became corrupt in my #2 user login account using Firefox 6.02.
Now I have tried to use a new user in fire fox and that did not fix firefox for user #2 on Vista.
I also disabled AD BLOCKER and that didnt help either.
SO my only observation is that the VISTA user #2 account utilizing FireFox 6.02 has changed some how and won't load web pages properly.
Vista User account #1 Fire fox works Fine...
Any idea? how to get user accounts FireFox 6.02 to work properly ?

Unable to change make a down payment using Purchase order

Hello Experts,
I created a purchase order and used that purchase order in f-47 and f-48 (created down payment for the P.O).
When i tried to execute the good receipt i encountered an error that said profit center not mentioned in line item 001. I understood that the profit center was not given in the material masters. I tried to give the profit center in the material masters. However, it says that there are purchase orders existing and cannot save for that reason.
Now i am unable to delete the Purchase order and the material masters is not saving because the p.o is existing. I am not able to come out of this.
Any help is highly appreciated
Regards
Raghuveer

Hi
If you have stocks you cannot change the profit center. The only way I can think of is to write a substitution rule to populate the profit center, so that you can do the GRN. You will have to do a profit center substitution probably by reading the plant.
Another way is to set the message MM335 in T Code OMT4 as a warning and than try updating the profit center in material master itself.
Thanks & Regards
Sanil Bhandari

I am having trouble with my bookmark bar changing order between my devices. I have them organized for convenience, but when I arrange them on one device they change on the others to a different order. how can I fix this?

I have 2 desktops and a laptops connected by Firefox sync which I set up at some time during the beta. I have several folders, dividers, and bookmarks on the toolbar which I try to keep organized based on their use (web design, hardware/tech support sites, personal, etc) but when I arrange them on one computer it screws them up on the others. I would like for it either to keep them in the same order on all machines, or at least have to arrange them on each machine separately without them affecting the other so they stay where I put them. Does anyone know how I can accomplish this?

This is what I'd suggest get your machines matched. Sync your machines so all data is on both. Then pick one to get all of your organizing as you want it. (or do this before you even setup sync) Then, when you do your initial sync from that organized machine, select: replace all other devices with this computers data. (you can also do that as Manage Account > reset sync.
After that, changes in order on one machine should be reflected on the other. Remember though Sync '''merges ''' the data from your machines. If you work on two machines side by side and make order changes on both without syncing either, once you do sync, Sync will have to again figure out how to merge the incongruities, which may not be what you expect.. Be careful, if order is important to you.

Availability Check Changed on the Material Master Update Existing Orders

I need to know if there is a way to update existing orders once changes have been made to the material. Currently the only way that I know of is to go into individual orders change the plant save then change it back to the original plant on the order then the changes take effect. How can I achieve this without touching every order individually. Is there something to mass update existing orders to take a new snapshot of the material master settings for a material.

Try with t.code VA05 - Open sales order list.
Execute this list. In the output, sort the data by plant. Then go to menu Edit -> mass change -> new plant. Change the plant for group of sales orders that have similar plants. Then again do the same thing to bring the previous plant in the sales orders.
This can help reduce the time instead of going one by one.
Regards,

Approval procedure if user change in the unit price at Purchase Order

Dear Experts,
I have defined purchase price list in the item master data. I want an approval if there is any devaition in the purchase price list and unit price which is defined in the purchase order. It will always go for the approval.
Regards,
Ravindera

Dear Ravindera,
Approval is only working on the header level. Unless you just care about the first line, no approval procedure can be built for other lines.
You can block those PO by SP_TN instead.
Thanks,
Gordon

Why does the tab order I set change when I enable usage rights?

I am using Adobe Pro 9.1.2 - set the tab order manually in a 4 page document - test everything - works great. Then, I enable usage rights, go back into the document to test, and the tabbing is out of order again. I have done this multiple times and what should have been a simple task is now taking hours to complete. Help!!! This didn't happen until I upgraded to this version.

Helvetica Neu 10 pt is the default text style for Numbers tables.
Setting a different style to one, some, or all cells does not make that different style the 'default.' Here's an example of the effects of three different sets of actions. All cells in the table had been set to display text as Jazz LET, 12 pt. The original content of B3, C3, and D3 was the same as is shown in C4. For each of the cells in row 3, the procedure described below was carried out, then the text shown was typed into the cell.
When you Select a cell, then "Cut" the cell, the cut includes the text AND any style that has been set for that cell, and the cell reverts to the default style. See cell B3 in the example.
If you Select the cell, Copy, then press delete, the text (and style) are copied, the content (text), but not the style, is deleted. See C3.
If you click on the cell to select it, click again to place the insertion point in the cell (to edit the text), then Select the text and press delete (or Cut), then the text is removed from the cell, but the style remains. See D3.
Regards,
Barry

Customer Address change on the Open orders

We are unable to make a customer address change on the customer whenever an open order exists with the customer, is it intended functionality? Is there any workaround available to update the customer info whenever an open order exists.
Thanks,
Srini C

Hi
It is not possible to maintain address as validity period. Print program is always considering the current address.

If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right

If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right.

You can create a folder with the home pages by using "Bookmark All Tabs" to open a specific page.
You can place that folder on the bookmarks toolbar or use the Bookmarks menu button that you can find in the toolbar palette to get access to that folder easily.
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page.

In iGoogle with firefox 4 I am unable to get the tabs to change down the left hand side or get any response to selections made to items like calender or weather this does not happen in Explorer 9.

After loading FireFox 4 all worked OK for a while. Now when trying to change the tabs on left hand side (Home etc) or change selections on the apps (Weather or Calender) nothing happens. I am running iGoogle with FireFox 4 but this does not happen when trying the same thing with Explorer 9.

Having the same problem, but not only can't change tabs, but cannot open links on the page. I thought that by reducing my iGoogle page to one tab, and putting what content I could into app tabs that would solve most of the problems. It did some. For a while I was able to bypass this with the iGoogle Tab Remover add-on but it stopped working last night and I've not been able to get it working since.

HT2513 Unable to change the view on the day, week, month, & year tabs

When I click on the tabs in the iCal window on my iMac, there is no response. It works properly in iCloud.

Sometime over the weekend, it started working. I think it was a conflic between my previous gmail calendar set up, which was also syncing with Outlook at my office. I turned disabled the gmail account on my iphone and stopped the google calendar sync on Outlook.
Now calendar, contacts, and email are all synced up just fine. I have my iphone, my imac, and Outlook on my pc at work all talking to each other without conflict . . . finally!

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I am unable to change either the tab order or bookmark order in FF 8.0.1.

Similar Messages

Maybe you are looking for