I am unable to change my id successfully -

I have had to change my id repeatedly. Maybe it is because the computer is registered
under my husband's name?
It keeps rejecting the id and password. It becomes a stalemate for me in shifting
to icloud, ordering from itunes, etc.
I have to keep an ongoing record of changes and still get stopped in my tracks
over and over.
Anyone know how to resolve this? I'd be grateful.
C.D. Wright

I have a similar issue. I recently changed my internet provider and changed my email address on iTunes. That started the problem for me. I couldn't update any iPhone or iPad apps previously downloaded. So I changed the email address back to the old one. Since then, accessing iTunes from my phone or iPad isn't working. It tells me the email address or password is wrong. I've tried changing the password. Although iTunes will connect on my computer, it still won't connect via phone or iPad. They continue to insist the email or password is wrong.
I have verified the email address with Apple.
Now iCloud won't connect with my computer. It is using my new email address. It tells me to check my email for instructions to verity my account, but I never receive the email.
Any suggestions?

Similar Messages

  • TS3999 When using iCloud Calendar, I am unable to change the color of my work calendar. I have successfully followed the instructions to reset the colors of other calendars as desired. However, this one calendar always defaults to purple.  Help!

    When using iCloud Calendar, I am unable to change the color of my work calendar. I have successfully followed the instructions to reset the colors of other calendars as desired. However, this one calendar always defaults to purple.  Help!

    File>New Calendar to create a new calendar (Groups are for grouping calendars and I should ignore them). When you've created the calendar, control-click on it in the sidebar and choose 'Get Info' There you can select a colour. You can have as many calendars as you like. When you create a new event you can select the calendar it belongs to, and hence the colour it has.

  • Unable to change "Your name" in BIS

    I have my Gmail account set up in BIS and everything is working perfectly, however, I am unable to change the "Your name:" field to anything other than what's already there.  I've tried deleting the account and re-adding it in there from the web site as well as from my BB to no avail.  When I change the field, I don't get an error and I receive a message saying "Email account successfully updated." but it doesn't stay.  For some reason, just my last name is in there (i.e. Smith) but I would like to change the "Your name:" field to my full name:  John Smith.
    Is there something I'm doing wrong?  TIA!

    What did your mobile operator have to say about it? This seems to be a problem specific to them. They can disable most of the fields your BIS account.
    WhackBerry_

  • OpenHub - unable to change the extraction mode in DTP

    Hi there,
    I have an Open Hub that is loaded from two InfoCubes and I need to change the DTPs from both of them.
    The problem is that Iu2019m unable to change the extraction mode of both DTPs from Delta to Full in spite of having deleted the Open Hub table. Even I have deleted the requests from the InfoCubes, but itu2019s not working.
    What else I have to do to change the extraction mode? Are there any other tables I should delete first?
    Thanks!!

    hi Rocio.
    Yes i think u can achieve this using an Init DTP load.
    first try to run an Init DTP , Init Without Data Transfer, select it from the Execute tab of processing Mode and then try to run the delta DTP without any load, then successive can be done.
    hope this will help u.
    thanks

  • Users Unable to Change Password

    Small Business 2011 Standard with Windows 7 Pro workstations - all fully updated.
    We have an issue where none of the users can change their passwords. They receive a message saying that the password
    doesn't meet the length, complexity or history requirements of the domain.
    I know (at least in my case) that the password hasn't been used before and there is no problem with the length
    and complexity. I've even tried switching off the password policies in the SBS Console with no success.
    Apart from the SBS Console is there anywhere else I should be looking that has a higher priority than the console?
    TIA

    We are using SBS 2008 (SP2), and we too are having this problem. Have done all the necessary GP changes. Have done gpupdate /force. As test user, I seem to be unable to change password at all (originally "minimum age" was 1 day, if that is somehow
    still in force might explain why); my end user has waited longer than that, she reports she can change her password but never back to anything in her history (original default was, I think, 24 passwords, might explain).
    While rsop on domain and clients/rdc  shows:
    Policy Policy Setting
    Enforce password history 0 passwords remembered
    Maximum password age 42 days
    Minimum password age 0 days
    Minimum password length 0 characters
    Password must meet complexity requirements Disabled
    Store passwords using reversible encryption Disabled
    Anybody any ideas now??? :(
    EDIT: Hmmm, net accounts /domain gives me:
    Force user logoff how long after time expires?: Never
    Minimum password age (days): 2
    Maximum password age (days): Unlimited
    Minimum password length: 0
    Length of password history maintained: 24
    Lockout threshold: 50
    Lockout duration (minutes): 10
    Lockout observation window (minutes): 10
    Computer role: PRIMARY
    The command completed successfully.
    Those settings would explain my problem, then!
    I can see that net accounts will allow me to alter this stuff, from the command-line, I guess that is what I need to do?
    NET ACCOUNTS
    [/FORCELOGOFF:{minutes | NO}]
    [/MINPWLEN:length]             
    [/MAXPWAGE:{days | UNLIMITED}]
    [/MINPWAGE:days]
    [/UNIQUEPW:number]
    [/DOMAIN]

  • Sun Netra X4250 ILOM update = unable to change iLOM ip to the factory def

    This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here:
    http://www.sun.com/servers/netra/x4250/downloads.jsp
    ILOM updated to Version 3.0.3.30 (ILOM) build 44534
    We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e. 192.168.0.145. To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip.
    So, we suspect that the problem could be due to the new firmware.

    This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here:
    http://www.sun.com/servers/netra/x4250/downloads.jsp
    ILOM updated to Version 3.0.3.30 (ILOM) build 44534
    We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e. 192.168.0.145. To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip.
    So, we suspect that the problem could be due to the new firmware.

  • Unable to change the data in PSA

    Hello All,
    I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
    Could you please let me know how will i see all columns from PSA. Thanks
    Regards,Ashok

    Hi Ashok,
    To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
    Also if you want to see say all the failed records you can sort the order of the data using the Status column

  • Unable to change the data source of SAP system

    Dear all,
    We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
    while installation i have given the central SLD system as solman,
    By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
    Request please let me know how to resolve this issue.
    Thanks
    Paresh

    Hi Paresh,
    You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
    Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!)  to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
    Hope this helps sort out your issue.

  • Unable to change Profile picture in Windows 8

    I recently upgraded to Windows 8.  The upgrade imported a picture from my Windows 7 Skype, and now I am unable to change the profile picture.  There is no menu at the top in Windows 8, which prevents me from changing the profile picture.
    What are my options for correcting this, and also how does one sign out of Skype in Windows 8?
    Thanks so much.

    Although I'd love to provide a proper response, unfortunately I too have only questions, which I'd hope someone could answer. "Opening Skype and clicking on the picture" isn't as helpful as one would hope. With Windows 8 -- in either mode, through either Google Chrome or IE10 -- there is not only no menu or options with either right or left clicking, but no clear way to change a profile picture through any other means. I've tried everything I could think of -- literally wasting HOURS trying to change this thing. Googling the question gets me only fixes that don't appear to apply. In fact, the lack of coherent help regarding anything having to do with Windows 8 is nothing short of mindboggling -- and I consider myself a pretty good finder-of-information normally!!! I read elsewhere in these forums (unfortunately lost to me now that I have signed in) that it may be a problem relating to whether my browser is 32 or 64 bit (if I read it right). I have since tried to load Chrome in 64 bit.... probably unsuccessfully, given I still can't seem to do much differently. Being a bit of a techno-dud I don't know how to check which version I now have as even with the "about:version" function, the reply isn't definitive to my untrained eye (unless WOW64 means something?). I need things somewhat dummied down. I'm totally new to both Windows 8 and Skype (and for that matter Google Chrome, having always been a Firefox fan, which apparently is not working properly for Windows . ANY help that might be available would be greatly appreciated in making this experience less frustrating. Thank you for whatever you can do!!!

  • Unable to change setings, was in Siri, got 'jammed'

    This 'Senior' got jammed-up. Unable to change settings, settings unresponsive and am stuck in Siri. Problem happened IN SIRI, now can't change settings to even access the Siri option.
    SETTINGS WON'T LET ME ACCESS OPTIONS 'below level of Wallpaper'.  Swipe won'r allow to go to any other screen in settings.
    This happened in SIRI and I can't even disable 'turn-off' Siri 
    Unable to close applications on bottom of screen as well, as usually done.
    The 'voice mode' is on, and that is what jammed everything up.
    The only appications which show 'open on screen are' Messages,Phone, Settings and Safari, Mail, Music,  and I am prevented from 'closing them'.
    I did a turn-off, began again with the apple logo but can't reset.
    Can't get past the first screen in my apps. 
    I BELIEVE it is a SIRI problem but can't change settings other than 'Airplane Mode through Wallpaper.'
    I bet there is someone who would help a 'Grandma'!
    What on Earth IS wrong?!!! and how can I get 'out of it' without going to the Apple Store.
    Tiny store ,International Record  as "Smallest Apple Store in the World", Santa Rosa, California..and they aren't much interested in giving-up that claim to fame!
    it's usually like the 'final boarding of Noah's Ark in there" and NOT a fun place to be!!!
    Sue,
    Superwhiff

    User's Group,
    Immediate help from randers4 got me 'back in business'. I would have not beieved I could have done this without a trip to the store and a distant appointment date.
    Things seemed messed-up beyond my ability to affect any change!
    Alone, this would not have been possible.  I feel I learned a great deal about the IOS 5 system's Siri quirks.
    This is what it is all about.
    People helping others who know less than they do!
    Gratitude is such a small word,
    this was monumental for me to have done even with the assistance of another person.
    Superwhiff,
    Sue from Santa Rosa

  • Unable to change Date Created in Metadata

    Please help with my first post...
    Unable to change Date Created field in Metadata.
    I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
    When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
    If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
    To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
    Next I have to Import this into Aperture where the Date Created shows as "20090926".
    Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
    Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
    Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
    Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
    Thanks in anticipation.

    Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
    What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
    I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
    As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
    1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
    2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
    or
    3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
    Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
    nathan

  • Unable to change font color from white

    In any new or previously saved Pages documents, I am unable to view the font. I know the text is there, because when highlighted, the text shows as white, but I am unable to change it to any other color. This has never been a problem before. Ideas? Would this have something to do with not updating to iWork'09?

    Welcome to Apple Discussions
    If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

  • Unable to change status in messages

    Hey guys,
    Okay, so I am unable to change my status in messages or do anything for that matter.
    My friends messages app looks different then mine and she actually has more options then me. It will not let me set to online status or anything, it's like disabled and I cannot figure it out. Also when I send a message from my mac, it will say my email when my friend recieves the message but then if I send it from my iphone it says my number, so it starts two different conversations.
    This is annoying and when I called tech support they had no idea what I was talking about.
    Any smart apple users out there

    The new Messages app in Mountain Lion has two aspects. It integrates most of the features of the old iChat program (using AOL and Jabber transport mechanisms among others, which include the concept of on/offline status) with Apple's new iMessage transport mechanism (which doesn't).
    Your phone-to-phone message are probably going through yet a third transport mechanism, SMS. You can set your phone to use iMessage transport to eligible recipients by going to Settings > Messages, turning iMessage to "ON", and including your AppleID (~email address) in "Receive At" along with your phone number.
    We are told that when iOS6 is released this fall it may help combine the multiple conversations. It is not yet clear how.

  • Unable to change text size

    So I have been unable to change my text size in itunes. When i switch between "large" and "small" text sizes the size remains the same, however the size of the menus and the itunes stores is small. I theorize it was probably some program I installed but since I am nearly constantly adding and removing programs I can't pinpoint which one it was. If anyone can tell me how to fix it or point me in the right direction that would be great. I am including my system info as well as a screen of itune. Thanks.
    System
    Manufacturer Gateway
    Model NX860XL
    Total amount of system memory 2.00 GB RAM
    System type 32-bit operating system
    Number of processor cores 2
    64-bit capable Yes
    Storage
    Total size of hard disk(s) 75 GB
    Disk partition (C:) 16 GB Free (65 GB Total)
    Disk partition (D:) 4 GB Free (10 GB Total)
    Media drive (E:) CD/DVD
    Graphics
    Display adapter type NVIDIA GeForce Go 7900 GS
    Total available graphics memory 527 MB
    Dedicated graphics memory 256 MB
    Dedicated system memory 0 MB
    Shared system memory 271 MB
    Display adapter driver version 7.15.10.9816
    Primary monitor resolution 1920x1200
    DirectX version DirectX 9.0 or better
    <ahref="http://s152.photobucket.com/albums/s178/Snelk/?action=view&current=Scree n001.jpg" target="_blank">

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Unable to change group text name or add person to some group texts in iOS 8

    I really like the ability to change group text names as it helps me separate work group texts from personal especially when I have coworkers that have separate business phones. I'm unable to change the name of some group texts as the option is not there when I go into details. I'm also unable to add contact to the same group texts that I'm unable to change the name on. Is this a glitch or am I missing something?

    Hi CaliWingsFan,
    If you are having issues with renaming and adding users to group texts, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    Next, I would try restarting the iPhone -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPhone as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for

  • Format of numeric field cannot retain via Live Office

    In Webi, I changed the format of an numeric field to 2 decimal places.  When I retrieved this field to Excel via Live Office, I found the format of 2 decimal places cannot be retained.  It ended up displayed in 1 decimal places. I found when a webi r

  • I just got my iPhone in the mail

    Just got off the phone with Sprint-I was her first iPhone customer. I am up and running! I couldn't believe that everything automatically synced from my Macbook to my phone. I love this-now to figure out how to use it!

  • Grouping with 2 date in sql server

    totle_count          dt          name    program_id 1   1/3/2015   Tea 14 1   1/5/2015   Tea 14 1   1/6/2015   Lunch 13 17 1/6/2015   Tea 14 2 1/9/2015   Breakfast 1008 39 1/10/2015   Breakfast 1008 4 1/19/2015   Breakfast 1008 1 1/19/2015   Dinner 1

  • Zero Block Corruption in SE Environment.

    Environment: 11g Using Standard Edition of Rracle in Windows environment. I'm having difficulties finding any article or support documents for Zero block corruption issues at logical level. If i took Export of the full database, and have no errors. d

  • RAC setup- Configure hostname in ODI agent

    I have my Master & Work repositories hosted on a Oracle RAC environment. I have a standalone ODI agent which might installed in the same physical server or in a different server. In a RAC setup, there are multiple hostnames for the same database. How