I am unable to change my persona. I click on "wear it" and my persona does not change.

no special details

(Note: Your "more system details" shows you have Firefox 11, not Firefox 5)
Go to http://www.getpersonas.com and try a persona. If it doesn't work, maybe you already have a theme installed that is preventing you from using a persona? Go to Firefox Add-ons Appearance tab and try enabling the default theme and try again. For more information, see [[Using themes with Firefox]].

Similar Messages

HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

To change your Apple ID, follow these steps:
Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
In the "Apple ID and Primary Email Address section," click Edit.
Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now in the email.
When the My Apple ID page opens, sign in with your renamed Apple ID.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.

HT1199 I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

AP is unable to associate. The Regulatory Domain '-E' configured on interface '802.11a' does not match the Controller Regulatory Domain '-C'

Hi,
There are three different types of APs associated with controller and working fine.
1.       AIR-LAP1252AG-E-K9
2.       AIR-LAP1522AG-E-K9
3.       AIR-CAP1552E-C-K9
WLC is AIR-CT5508-K9. Software version is 7.4.100.0. Field Recovery Image is 7.0.112.21. Firmware version is FPGA 1.7, Env 1.8, USB console 2.2. WCS is 7.0.240.0 for Windows.
WCS is sending alarms for AIR-LAP1522AG-E-K9:
Message: AP is unable to associate. The Regulatory Domain '-E' configured on interface '802.11a' does not match the Controller Regulatory Domain '-C'.
Before Controller was 7.2.4 (not sure).
Country configured on WLC is AE and shows -CE regulatory domain. Mesh APs are also associated.
I believe this Critical alarm should not come.
how much is this alarm important? What should be done to resolve this?

Typically you still need to make sure that the country codes are indeed configured on the WLC. Thing can change when you upgrade code as standards might of changed and regulations also. If your AP's are functional, then you should be okay and I wouldn't worry too much about it, but if after the upgrade, the WLC complains about country code stuff, then you just need to verify that the AP's country code is defined on the WLC. May times the AP will not join and if it does join, the radios might be disabled or in a down status.
Sent from Cisco Technical Support iPad App

I would like to use my work exchange email on my macbook pro. But I cannot insult it. I have not problem as on my iPhone or iPad. My work IT person does not know what is wrong.

I would like to use my work exchange email on my macbook pro. But I cannot install it. I have no problem my work email on my iPhone or iPad. My work IT person does not know what is wrong. Why I try to set up the email I get the message that it cannot connect to this server.

Try going into System Prefereces then Mail, Cintacts & Calendars then click on the Microsoft Exchange link on the right. Type in your email address and password and allow it to set it up automatically.
Make sure your Mac is updated to the newest version of Mail.
If that still fails then I suggest you switch email clients. I don't care for the built in mail program. IMHO it is very buggy.

HT1277 I am unable to Quit Mail and this then does not allow me to shut down my desktop apple.

I am unable to Quit Mail and this then does not allow me to shut down my desktop apple.

Welcome to the Apple Support Communities
Open  > Force Quit and close Mail

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

I am unable to remove imported photos from the iPad. The red delete button does not come up and synching did not help. Any ideas

I am unable to delete photos that have been imported from a camera. The red delete button does not appear and synching with the photos ticked and then unticked does not work either. I have also tried attaching the iPad to the PC and looking for the photos using windows file management. However the only photos that I can find are those taken by the iPad itself. I am confused about why something that should be simple is not.

If photos were synced from your computer then they can't be deleted directly on the iPad, you will need to remove/de-select them from where you synced it from on your computer and re-sync.
http://support.apple.com/kb/HT4236

I am unable to sync my Ipod Nano (4th generation I believe) because my computer does not recognize my device. Can anyone help me solve this problem?

I am unable to sync my Ipod Nano (4th generation I believe) because my computer does not recognize my device. Can anyone help me solve this problem?

Reset the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows

Getting error ORA-20001: This person does not have preferences for the sele

*) I got user_id by following query
SELECT USER_ID, USER_NAME, FND_USER.*
from FND_USER where user_name = '205174';
*) resource_id by following query:
select * from APPS.PA_PROJECT_ASSIGNMENTS where RESOURCE_ID in (select RESOURCE_ID from APPS.PA_RESOURCES_DENORM where PERSON_ID
in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ) ;
*) person_id by following query:
select * from APPS.PA_RESOURCES_DENORM where PERSON_ID in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ;
and
Hi,
When I am running following query to submit timesheet, getting following warning msg
anonymous block completed
ORA-20001: This person does not have preferences for the selected effective date
Following is query
set serveroutput on size 1000000
DECLARE
l_tbl_messages hxc_message_table_type;
l_message fnd_new_messages.message_text%type;
i pls_integer;
l_app_blocks hxc_block_table_type := hxc_block_table_type();
l_app_attributes hxc_self_service_time_deposit.app_attributes_info;
l_time_building_block_id number;
l_new_timecard_id number;
l_new_timecard_ovn number;
l_bb_id number;
l_resource_id hxc_time_building_blocks.resource_id%TYPE := 3595; -- XPCPAY
l_start_time hxc_time_building_blocks.start_time%TYPE := fnd_date.canonical_to_date('2011/10/17 00:00:00');
l_measure hxc_time_building_blocks.measure%TYPE := 1;
l_element_type_id varchar2(80) := 'ELEMENT - 50809'; -- Jury Duty
l_comment_text hxc_time_building_blocks.comment_text%TYPE := '';
l_deposit_process hxc_deposit_processes.NAME%TYPE := 'OTL Deposit Process';
l_retrieval_process varchar2(250) := 'BEE Retrieval Process';
BEGIN
fnd_global.apps_initialize ( user_id => 3850 -- XPCPAY
, resp_id => 3595 -- Self Service Time
, resp_appl_id => 809 -- HXC
hxc_timestore_deposit.create_time_entry ( p_measure => l_measure
, p_day => l_start_time
, p_resource_id => l_resource_id
, p_resource_type => 'PERSON'
, p_comment_text => l_comment_text
, p_deposit_process => l_deposit_process
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_time_building_block_id => l_bb_id
hxc_timestore_deposit.create_attribute ( p_building_block_id => l_bb_id
, p_attribute_name => 'Dummy Element Context'
, p_attribute_value => l_element_type_id
, p_deposit_process => l_deposit_process
, p_app_attributes => l_app_attributes
hxc_timestore_deposit.execute_deposit_process ( p_validate => TRUE
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_messages => l_tbl_messages
, p_mode => 'SUBMIT'
, p_deposit_process => l_deposit_process
, p_retrieval_process => l_retrieval_process
, p_timecard_id => l_new_timecard_id
, p_timecard_ovn => l_new_timecard_ovn
-- OUTPUT MESSAGES --
DBMS_OUTPUT.put_line ('l_new_timecard_id = ' || l_new_timecard_id);
DBMS_OUTPUT.put_line ('l_new_timecard_ovn = ' || l_new_timecard_ovn);
if (l_tbl_messages.COUNT <> 0) THEN
i := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS(i));
l_message := fnd_message.get_string ( appin => l_tbl_messages(i).application_short_name
, namein => l_tbl_messages(i).message_name
DBMS_OUTPUT.put_line (l_tbl_messages(i).message_name);
DBMS_OUTPUT.put_line (l_message);
i := l_tbl_messages.NEXT(i);
END LOOP;
rollback;
else
commit;
end if;
exception
when others then
DBMS_OUTPUT.put_line(SQLERRM);
END;
/

Please check the following MOS notes:
ORA-20001: This Person Does Not Have Preferences For the Selected Effective Date [ID 876324.1]
ORA-20001: This Person Does Not Have Preferences For The Selected Effective Date [ID 761470.1]
Troubleshooting Guide for HRMS API Errors - ORA-20001 and APP Errors [ID 152259.1]
''This Person Does Not Have Preferences For The Selected Effective Date'' Message [ID 287581.1]
Diagnostics - Setup - Time and labour Person - Test failed [ID 397214.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

JBuilder Personal does not allow database access ?

Hi friends,
JBuilder Personal does not allow database access ?
Thanks,
MYI

JBuilder 5 Personal doesn't allow drag and drop capabilities for Database Express. Borland has disabled many of the programs features in the free downloadable version.
However, there are still many ways to access a database, you just have to do it yourself. For instance you can use the JDBC-ODBC bridge to connect to a MS Access database and there is plenty of on-line documentation on how to do this.
hope this helps.

I send a text and it comes back saying invalid or person does not subscribe. But yet I can read the text te same person sends me? Is it a problem on my end or theirs?

I send a text to someone and it comes back almost instantly and says the message is invalid or the person does not subscribe. But yet they can send me a text and I can see it. Is the problem on my end or theirs?

No. It's not an iMessage. Just a regular text message. I can receive their texts and make a call to them. ??

I changed my apple id on my computer and my iPad does not recognize the new id

I changed my Apple id on my computer and my ipad does not recognize the new id and continues to display the old id. How can I get it to change to the new id?

Easy Fix: On your iPad, go into Settings>Mail,Contacts,Calendars and click on your hotmail account. Simply replace the password that's already there with your new one. Then, I recommend rebooting your iPad:
To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
If you've already tried this, then the next step would be to delet your hotmail account from your iPad (also in Settings>Mail, Contacts, Calendars) and then reboot the iPad and add the account back again.

In a group text with two phones that use Imessage and one that does not. The person that does not, does not get my message when its sent in group text. How do i fix this?

I have a group text with two of my friends. here's each person break down
person 1 ATT network, using imessage
person 2 verzion network, using imessage
person 3 verzion network, using SMS
All three of us are in a group chat. When person 1 sends a message, person 2 recieves it, but person 3 does not. Then when person 3 sends a message, both person 1 and 2 get it. When person 2 sends an Imessage, person 1 and 3 get it
so the problem is when person 1 sends an imessage, it doesnt change to sms and person 3 doesnt get it, but person 2's automatilly switches it to green.
How can person one get their phone to automaticlly switch it to green in group message while keeping on imessage?

The quote below from http://support.apple.com/kb/HT5760 indicates that it in the situation you describe it should be going as MMS to everyone -- which is not what you are seeing actually happen (and also not what you want to happen if I understand correctly). There may be something else helpful in the link.
Group messages will be sent using iMessage if all recipients have iMessage enabled. If not, the conversation will be sent as MMS. Group messages use MMS even if the content is text only.

I am unable to change my persona. I click on "wear it" and my persona does not change.

Similar Messages

Maybe you are looking for