I am unable to connect my ipod to the inernet

I plug in my ipod but Wifi is not connected...........I don't see any songs I've downloaded....it always says no internet

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:                 
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

  • Lo9st my computer. If I connect my iPod to the new will I lose wht is on the iPod or will it sync and put songs on the new computer

    lost my computer. If I connect my iPod to the new computer will I lose what is on the iPod or will it sync ok and transfer the music to the new computer?

    Not unless you choose the Erase and Sync option.  However, you won't be able to transfer content from the iPod to iTunes via iTunes or sync any new content to it until you restore the iPod or choose the erase and sync option.  So if you need to get the contents of your iPod moved over to your PC, see this older post from another forum member Zevoneer covering different ways to accomplish this.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • When i connect my ipod to the computer a box pops up and say that itunes cannot locate this device, and if the problem persists to uninstal itunes and then reinstall. Well i have my own user on tunes so if i uninstall ituneswill it uninstall on all users?

    when i connect my ipod to the computer a box pops up and says that itunes cannot locate/read this file, and if the problem persists to uninstall itunes and then reinstall, but i have my own user on the computer, so if i uninstall it on my user will it uninstall it on every user?

    Hello BPeery,
    I would go through ALL the steps here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Let us know how it goes.
    Hope this helps.
    ~Julian

  • I connect my ipod to the computer, but itunes doesnt recognize it therefore i cant add files to my ipod, any solution ?

    i connect my ipod to the computer, but itunes doesnt recognize it therefore i cant add files to my ipod, any solution ? ( the ipod display shows that it is connected )

    Try force rebooting it, hold down the power and home button for 10 seconds until the apple boot logo comes up. If that doesn't work, try rebooting your computer.

  • HT201269 i want connect my ipod to the itunes

    i want to connect my ipod to the itunes because its atomatically off and its show me to connect with itunes so plz would u help me////

    Connect the iPod to your computer and restore via iTunes.
    iTunes: Restoring iOS software
    There is no way to get any data off the iPod now.

  • I recently had to set my laptop back to factory settings, thus had to reinstall Itunes.  I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod.  Help me!!

    I recently had to set my laptop back to factory settings, thus had to reinstall Itunes.  I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod.  Is there someone out there that can help me out? I would appreciate it!

    Hi NYYJMM,
    Thanks for visiting Apple Support Communities.
    You may want to reset your iPod nano and then sync again. If the issue persists, restore your iPod and try again. See these articles for the steps:
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    Best Regards,
    Jeremy

  • It doesn't recognise my password for wifi. Unable to connect. Tried ressitng the network,changed the wap settings,nothing. Pswd is 9 characters. MacBook

    iPad 2 doesn't recognise my password for wifi. Unable to connect. Tried resetting the network,changed the wap settings,nothing. Pswd is 9 characters. MacBook and iPhone accepts the password, not my ipad 2

    Hey brainmasala,
    Thanks for using Apple Support Communities.
    Sounds like you are not able to connect to a Wi-Fi network with your iPad. This article has a section for Unable to connect to a Wi-Fi network and the second article is the recommended network settings. If after these it still has the same issue you may want to restore the device to factory settings.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Have a nice day,
    Mario

  • Unable to connect to internet via the proxy - Proxy set up OEM 12c

    Windows server 2008 64 bit
    OEM 12.1
    I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
    But when I input my Oracle support credentials I get an error :
    Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
    Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
    test successful :
    https://updates.oracle.com was tested successfully using the Proxy.
    Go to set oracle support credentials error :
    Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
    In the emoms.log file :
    2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests.  ).
    java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests.  )

    Please check the following section in
    http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
    Enabling Oracle Management Service to Access My Oracle Support
    Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
    At minimum, the following URLs should be made available through the firewall:
    aru-akam.oracle.com
    ccr.oracle.com
    login.oracle.com
    support.oracle.com
    updates.oracle.com
    About the dontProxyfor Property
    When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
    For example, suppose the following were true:
    You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
    You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
    You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
    In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
    http://support.oracle.com
    The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
    proxyHost=proxy42.example.com
    proxyHost=80
    dontProxyFor=.example.com, .example.us.com
    PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

  • Everytime i connect my ipod to the computer, itunes says that this ipod cannot be used because the apple mobile device service is not started, what should i do?

    Everytime i connect my ipod to the computer, itunes says that this ipod cannot be used because the apple mobile device service is not started, what should i do?

    See this article for how to restart this service.
    http://support.apple.com/kb/TS1567
    B-rock

  • HT2155 I want to use hotmail as my email not icloud and need to connect new ipod to the same account as my ipod nano

    I want to use hotmail as my email not icloud and need to connect new ipod to the same account as my ipod nano

    Just setup the iPod with your Hotmail account email address/Apple ID
    The add the Hotmail email account to Settings>Mail

  • ERROR: Unable to connect to any of the specified MySQL hosts.

    Hi all, 
    I have run into an issue and not able to resolve it. 
    There was a requirement to connecting to a MySQL data source. For that I unknowingly added an entry in the "ODBC Data Source Administrator" ->
    User DSN & System DSN 
    I was totally unaware that I am breaking my SP setup (Development). Now Central Admin site and all other sites have stopped working. 
    I tried repairing by re-running the config wizard but no use. Error I get is "An unexpected error has occurred." OR "Unable to connect to any of the specified MySQL hosts." 
    But when I try accessing other site, its showing an error from the "machine.config" file: >
    Line 284: <siteMap>
    Line 285: <providers>
    Line 286: <add name="MySqlSiteMapProvider" type="MySql.Web.SiteMap.MySqlSiteMapProvider, MySql.Web, Version=6.9.6.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
    Line 287: </providers>
    Line 288: </siteMap>
    Source File: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\machine.config 
    For record, I have already removed those entries from that User DSN & System DSN.
    Still error persists. 
    If some has ANY IDEA how to resolve it... please help! 
    Regards, Nayan

    Can you give us a description of what is happening? Errors form the Application and System Event Log, and/or ULS logs?
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I copied my itunes library via an external hard drive. now when i connect my ipod to the new computer i can see my music but my apps are disabled

    i copied my itunes library via an external hard drive. now when i connect
    my ipod to the new computer i can see my music but my apps are disabled

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • Unable to connect to DB using the SID

    HI Forum,
    I am unable to connect to DB using the SID i assigned using TOAD, but i am able to connect using the instance name.
    My setup needs that i should use a common name to connect to the DB immaterial of which instance is up.
    Can any one instruct me how to achieve this kind of setup.
    Regards
    Prakash

    Hi Prakash,
    1). Create a file called TestingLoop.java containing following code:
    import java.sql.*;
    public class TestingLoop {
    public static void main(String[] s)throws Exception {
    Class.forName("oracle.jdbc.driver.OracleDriver");
    /* String url="jdbc:oracle:thin:@(DESCRIPTION= (LOAD_BALANCE=on)
    (ADDRESS=(PROTOCOL=TCP)(HOST=a) (PORT=1521))
    (ADDRESS=(PROTOCOL=TCP)(HOST=b)(PORT=1521))
    (ADDRESS=(PROTOCOL=TCP)(HOST=c) (PORT=1521))
    (CONNECT_DATA=(SERVICE_NAME=orcl)))"; */
    String url ="jdbc:oracle:thin:@abc.us.oracle.com:23001:xyz";
    for (int i=0; i<20; i++) {
    try {
    long x= System.currentTimeMillis () ;
    Connection conn = DriverManager.getConnection(url,"scott","tiger");
    long y= System.currentTimeMillis ();
    System.out.println("Connection Succesful "+conn);
    System.out.println("Connection time is "+(y-x)/1000+" ms");
    Statement stmt =conn.createStatement();
    ResultSet res= stmt.executeQuery(" select host_name from v$instance");
    while(res.next()) {
    System.out.println(res.getString(1));
    stmt.close();
    conn.close();
    catch(Exception e) {
    e.printStackTrace();
    2). Compile the file using this command:
    javac TestingLoop.java
    3). Run the java program:
    java TestingLoop
    Single Virtual Ip doesn't make sense... does?
    You will lose failover vip capabilities...
    Regards,
    Rodrigo Mufalani

  • I can't connect my iPod to the computer

    I'm finding a trouble connecting my iPod to the computer

    Think i have the same problem .....
    how did u solve the problem???

Maybe you are looking for