I am unable to connect my new LaserJet CP1525nw to the wireless

I already have 2 other HP printers and I only had to type the IP info and they are connected.
my IPs are wierd, my printer and computer IPs are xxx.xxx.1.xx and my Gateway IP is xxx.xxx.0.1 and now when I try to enter these info on the printer it would not accept because they don't match, and when I enter xxx.xxx.0.xx to match the gateway, would not connect because the password is not recognised.
I also connected by network cable to the router to get it connected but will not connect.
I spent 3 hours with HP tech. in India in the morning and 2 hours with another tech. in the afternoon and no luck.

There are various ways to add a laserjet to a network.
What brand and model is the wireless router?
What operating system does the computer use (preferably one that is on the same wireless network the printer is intended for)?
Does your network use a DHCP server (most home routers have this enabled by default)?  If so, is there any reason you want to use a static IP address over DHCP for your network?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • HT1595 Trying to connect my new apple tv to the wireless network. When I try to use the remote, the Apple TV doesn't respond (doesn't go to the next screen). Could this be caused by a weak wireless signal?

    Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • "Unable to connect to iTunes Store" 90% of the time

    I have a 3rd Gen iPad with wifi only that I bought about 40 days ago.   Initially I had no problem downloading and updating apps but in the past few weeks I get "unable to connect to iTunes Store" over 90% of the time.   I always verfity the Internet connection is good and I've tried on my home wifi, my cellphone's mobile hotspot, and several hotel wifi connections.     The other day I went into settings and noticed the Security code for my Credit Card was blank so I filled it in and clicked "done".  Unable to connect so I checked back and the code was still blank.   I deleted and redid my CC info and messed with some other settings and iTunes finally let me update some apps.   Now I'm back home and it's giving me the error message again.    I'm wondering if this is a known issue or if there's a fix for it.

    Usually it's because you are not connecting to the internet via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • How do i connect my new mac mini to the thunderbolt display

    how do i connect my new mac mini to the thunderbolt displa,  It arrives tomorrow?

    It has a built-in Thunderbolt cable, see here: http://www.apple.com/displays/specs.html
    So assuming your mini has a thunderbolt port (you said it's new so I assume it does), you'd just plug the display's thunderbolt cable into the mini's Thunderbolt port.

  • When I connect my new iPhone 4s to the computer and iTunes is running, I am advised that a new update is available, but when I download it, I am informed that my phone can not be updated because it has an incompatible hardware

    When I connect my new iPhone 4s to the computer, iTunes informs me that there is an update avaialble and I procceed to download only to be told that my phone has incompatible hardware so cannot be updated. Any advice please

    Hi, I just re-downloaded the update, but instead of telling it to download and install, I just clicked on download only. This is a 813 mb file and I am on limited broadband usage. I did it this way thinking that I would get a chance to see the exact wording when it tried to install, however, I have no idea how to try and install the file now and when I came to click on the iphone symbol on itunes, the download diassapeared, where to I have no idea. I can't afford to download it again, and besides it takes approximately three hours to download it in any case, so all I can remember is that the error message stated that it couldn't update because the phones hardware was not compatible.

  • TS1559 Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

    Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

    I had the same problem.  I did the reset networks on my iPhone & it did not work.  My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help.  I did that & it solved the problem.  I have not had the problem since.

  • TS1368 I got an new nano for christmas and l put it in to the computer, l just got Windows 8 on my computer, l am unable to connect my new nano to my computer. l have deleted itunes and put it back on my computer and still unable to connect please help me

    I got a new nano l am unable to connect it on my computer, l have windows 8. I have deleted itunes and downloaded back on my computer, l still am unable to connect my nano to my computer.
    When l put my nano on the computer itunes saids "Accessing Itunes" it is not connecting.
    Please help me.
    Thanks

    Uninstalling and reinstalling iTunes has no affect on the media on the computer or the account it is linked to.
    If the media was purchased under another iTunes account, then it is permanently tied to that account.
    Using mulitple iDevices with one computer

  • Unable to connect to new wireless network in Mountain Lion with Photosmart C4780

    I have a Photosmart C4780 and have just upgraded my imac to Mountain Lion. HP are not providing new drivers for my printer as they say it will work with Mountain Lion. I have downloaded software updates. However, I have just changed my wireless network as I have a new broadband provider but am unable to connect to it. My problem is that the set up assistant software provided which I used originally to set up does not work with Mountain Lion.
    Any ideas please?

    I have solved my problem, I've bought an Epson. It works perfectly. If HP can treat their customers with such disinterest and contempt I don't want to give them my money. 

  • Unable to Connect Using New AirPort Express 802.11n

    My mom purchased an AirPort Express 802.11n wireless router (AX) and I, as the designated "technology guru", was tasked with setting it up. Unfortunately, I am having problems out of the box.
    When I connect it to the wall, it is found by AirPort Utility, but when I try to set it up, it is unable to connect to the wireless network. ("An error occurred joining the selected wireless network." "An error occurred, close the configuration window and try again.") This is annoying because I have an older AX and it was true to the "it just works" Apple mantra. It is also annoying because the error message has a comma splice.
    Feeling pretty proud of my "technology guru" title, I come here to see what I could be doing wrong. I try connecting the computer directly to the router via ethernet cable. With this, I am able to setup my wireless network. I am still not able to connect to it. Additionally, once the AX has been configured, the AirPort Utility can't find it.
    I tried updating firmware to 7.5.2. I've tried downgrading to 7.3.2. I've tried hard resets, soft resets. Every tip I could find I have tried. Please help. My self-confidence is wearing out.
    Is it time for a call to Apple or a visit to the Apple Store?

    Are you trying to configure the Express to "join" the wireless network?
    If yes, the message you are receiving is likely an indication that you do not have the correct security settings selected for the Express. Unless the security settings between the wireless router and Express match up exactly, the Express will display the error that "an error occurred, etc".
    The easiest way to confirm if you have this problem is temporarily set the main wireless router to "no security" and try to connect the Express that way. If you can connect, then you know that it is a security issue.
    Please tell us the exact setting for security that the wireless router there is using and we'll try to give you some more ideas.
    The Express will connect. It's just a matter of finding the right settings.
    Message was edited by: Bob Timmons

  • Unable to connect with new Data Source

    Hi everybody,
    After many developpment, I finally get my class to do what we need with crystal and webi report using Rebean and RAS SDK's.
    But, today we found a special case that I was thinking to solve following examples but the solutions given by the example do not work.
    Here is the case :
    We have Crystal report in BO using DSN file localted on the C:\ disk of the server. So, the Information for a such report founded in the IConnectionInfo object is :
    ConnectionInfo Kind = CRQE
    QE_DatabaseType = >ODBC (RDO)< (java.lang.String)
    SSO Enabled = >false< (java.lang.Boolean)
    Database DLL = >crdb_odbc.dll< (java.lang.String)
    QE_DatabaseName = >< (java.lang.String)
    QE_LogonProperties = >{FILEDSN=C:\path to DSN, UseDSNProperties=false, Trusted_Connection=false}< (com.crystaldecisions.sdk.occa.report.lib.PropertyBag)
    QE_SQLDB = >true< (java.lang.Boolean)
    QE_ServerDescription = >C:\path to DSN< (java.lang.String)
    Today, we had to import old crystal report in BO and for that report, the Data Source gives a DSN file on another disk R:\...
    So for the report where I found in a IConnectionInfo object a DSN file beginning by R:\, I have to change it by a new one pointing to the right DSN file on the C:\ disk. (The DSN file on the C:\ work perfectely because we can use it with other report).
    I follow this example : http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/e068eba5-1f57-2c10-10a0-91e111c98bc7
    And so I get the following code where I put all the parameter need for the correct DSN file on the C:\ :
    ConnectionInfos ci = (ConnectionInfos)dbcontroller.getConnectionInfos(null).clone();
                   IConnectionInfo ici = ci.getConnectionInfo(0);
                   // Create a new connection and start setting new properties
                   IConnectionInfo newConnectionInfo1 = new ConnectionInfo();
                   newConnectionInfo1.setKind(ConnectionInfoKind.CRQE);
                   newConnectionInfo1.setUserName("momtest");
                   newConnectionInfo1.setPassword("testmom");
                   PropertyBag newpb = new PropertyBag();
                   newpb.put(PropertyBagHelper.CONNINFO_CRQE_DATABASETYPE,"ODBC (RDO)");
                   newpb.put(PropertyBagHelper.CONNINFO_SSO_ENABLED,false);
                   newpb.put(PropertyBagHelper.CONNINFO_DATABASE_DLL,"crdb_odbc.dll");
                   newpb.put(PropertyBagHelper.CONNINFO_CRQE_DATABASENAME,"");
                   newpb.put(PropertyBagHelper.CONNINFO_CRQE_SQLDB,true);
                   newpb.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION,"path to DSN");
                   PropertyBag LogonProperties = new PropertyBag();
                   LogonProperties.put("FILEDSN","path to DSN");
                   LogonProperties.put("UseDSNProperties", false);
                   LogonProperties.put("Trusted_Connection","false");
                   newpb.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES,LogonProperties);
                   newConnectionInfo1.setAttributes(newpb);
                   try {
                        dbcontroller.replaceConnection(ici, newConnectionInfo1, null, DBOptions._useDefault);
                   catch (ReportSDKServerException error)
                     System.out.println(error.getServerError());
                   System.out.println("--->" + dbcontroller.getServerNames());
                   System.out.println("Refreshing document...");
                   clientDoc.refreshReportDocument();
                   System.out.println("Document refreshed");
                   ByteArrayInputStream byteIS = (ByteArrayInputStream) clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
    When we arrived at line "ByteArrayInputStream byteIS = (ByteArrayInputStream) clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);" we get a message that the logon failed.
    Someone have an idea?
    Edited by: jerome.vervier on Dec 29, 2011 4:23 PM

    Thanks Adam
    It ensure me that I get no usual error in my code and it confims me what I think.
    Thanks for help !

  • Airport extreme unable to connect to new router

    We just received a new router from our cable company. The old router worked with our airport extreme just fine.  After hooking up the new router the airport extreme could not connect to it.  I received the following error "error occurred while trying to access the apple wireless device.  Make sure your connection is valid Error -6753" So then I tried to power off and reset the Airport extreme.  The button was stuck on my reset button.  I did figure that out and was able to click the button.  But even if I would hear the audible click when i held down the reset button the amber light never flashed rapidly?  Not sure what else to do.  I have turned off the modem, unplugged the router, plugged them back in. etc.   I just don't know where to go from here.
    Thanks!
    jodi

    Were you able to get the AirPort Extreme to reset back to factory default settings, as LaPastenague detailed?
    The amber light needs to flash rapidly for about 6-8 seconds during the process to indicate that the reset is taking place correctly. Once you release the reset button, the light will stay solid amber for 15-20 seconds or so, then change to slow blinking amber.
    We are a bit confused as well, since in your first post you mention that you received a new router from the cable company, then later in the post, you mention that you have a (separate?) modem.
    In the most recent post, you mention that you have a new modem. Is the new router from the cable company the same device as the new modem?  Or, do you have a new modem and another new router in addition to the AirPort Extreme?
    Can you clarify on exactly what devices that you have? Make and model numbers would help. We know that you have an AirPort A1408.

  • Unable to connect to new Mail ISP

    Hi all
    I have recently moved my mail domain from one ISP to another. I have successfully updated my mail clients with the exception of my Blackberry Pearl (UK Vodafone). On this I deleted the original mail account and went about setting up the "new one" however it is consistently returning "We were not able to find the mail domain: mydomain. Please check the info and try again". I have tried this both on the device and on the browser. I have used the quick method and also the longer manual methods.
    Does anybody have any clues/tips? As I say my other clients such as OUtlook have picked up the new domain and as the change occured ~36 hours ago I assume that the DNS changes would be fully propogated.
    Thanks in advance.
    Alex
    Solved!
    Go to Solution.

    try the IP address instead of mail server name, it might not have replicated the change on DNS servers.
    Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

  • I am getting an unable to connect error messagen when I start the browser. The setting is set to "no proxy" and my internet connection is working fine. What can I do to fix this?

    I opened up my firefox browser yesterday and it crashed. Since then I get an error message that says "unable to connect" every time I try to load the browser. The setting is set to "no proxy" So it should be connecting. My internet explorer browser is working fine. So I know it is not my internet connection. What can I do to make the firefox browser work again?

    Hi,
    Maybe the radio connection on the other end is not working. Hope this helps.
    xxmitchxx90

  • I have just connected my new apple tv, in the main menu I see only two icons; "computers" and "settings".  Where do I find the icons for internet, movies etc. We do not live in the US..

    I have just connected my new apple TV and in the main menu see only two icons: computers and settings.  How do I access the rest of the icons (internet, movies etc...)  We do not live in the US.  The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.

    Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
    Reading through the threads my take is
    There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
    Power off, reset and factory restore doesnt seem to solve it
    Occasionally its nearby antenna cables etc causing interference
    One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
    Plugging in ethernet works, this is purely a wifi issue
    Sometimes plugging in ethernet temporararily wakes up the wifi
    Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue.

Maybe you are looking for