I am unable to connect to internet through my tata photon ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

I am unable to connect to internet through my TATA PHOTON + ZTE device.
Please help.

https://discussions.apple.com/thread/3680625?tstart=30
Best.

Similar Messages

Unable to connect to Internet through KRZR - please assist

Hi folks.
I have paired my KRZR K1 to my Macbook. In order for me to use bluetooth and connect to internet on the Macbook I need to input some info on the Macbook. Through reading he different forums I have inputted the following info:
Tel #: WAP.CINGULAR
ACCT Name [email protected]
Password CINGULAR1
I then try to connect and gives me an Internet Connect error box on my Macbook that says, "A modem error occurred. Please verify your settings and try again."
I have a Media Net plan with unlimited data as part of the plan.
What am I doing wrong?
Also when I first paired the phone to the Macbook in the final step it asked for a CID but I left it black. Is that my problem? Was I supposed to put something in there? Should I re-pair with any other specific information to get this to work?
Your help is greatly appreciated!
Jason

thanks!

Mavericks Bluetooth unable to connect to Internet through Bluetooth pan

Im trying to connect my MacBookPro running Mavericks to the Internet through a personal hotspot on my iPhone. This works fine with my wife's MBP running Mountain Lion, but I can't get a connection to the Internet. Diagnostics shows that I have a good connection to the phone and ISP, but Internet and server are red.
Any suggestions?
Thanks,
Mike

Yes but not to app world, just turn on wifi and set up
Pearl 9105 6.0 Bundle 2950
Playbook 2.1.0.1032

Unable to connect to internet through iphone

Hi all
I have some trouble connecting to internet throught iphones or ipads using internet sharing. Ive tried both bluetooth and cable.
Any ideas where to start?

Thanks for the reply.
I dont believe that the issue is with the iphone. I can connect to internet with the same phone on another computer. It´s just this computer that cannot connect with any iphone. Tried several.

Unable to connect to internet through Wi-Fi or Bluetooth

It seems like Sept 9, 2012 at 1:07AM was the last known time at which my ipad connected to the Internet eother through known wi-fi networks - two at work and one at home. I also tether my iphone (through ATT's network) to my ipad. I am also unable to do that as well. My Mac and iphone connect to all these networks without difficulty. I followed troubleshooting instructions on Apple troubleshooting page to no avail. Basically the ipad is useless to me without the internet. I am not going to update or reconfigure the routers at home or work because all the other computers, my daughter's and husband's work fine. It's just the ipad that has stopped communication with the outer world.

Yes but not to app world, just turn on wifi and set up
Pearl 9105 6.0 Bundle 2950
Playbook 2.1.0.1032

Unable to connect to internet through befw11s4 router v4

I have the latest firmware 1.52.03. I can connect directly to the modem but routerwon't connect. I was looking for a older firmware to downgrade because i just upgraded it 2 weeks ago. I don't know whatelse to do.

Yes and on your previous post, you said that even when the computer is directly connected to the modem, the internet is still slow.
Anyway, please follow the instructions from the link below. Let's just give it a try.
Setting Up a Router with Cable Internet Service

Spaces application is unable to connect to internet through proxy

hi ,we have developed a portlet which reads weather from XML file from the following URL :
http://free.worldweatheronline.com/feed/weather.ashx?q=Riyadh,SaudiArabia&format=xml&num_of_days=2&key=d35160acaf083722112707.
this works fine at our offices because we don't have a proxy server ,but when we implement this on client environment,the application fail to connect .
I've added proxy server IP and Port to the general proxy configuration on the server ,but it still no working .
i have webcenter 11.1.5 installed on oracle Enterprise Linux 5.5 64-bit .
i used this java option (JAVA_OPTIONS=${JAVA_OPTIONS} -Dhttp.proxyHost=172.16.1.20 -Dhttp.proxyPort=8080) i but this in setDomainenv but i have the same error ,is it possible that i put this option on a wrong place on the file ?
my application is deployed on admin server and on portlet server .
log files say nothing about this ,i don't know why !
can anyone help please ? tell me if you need anything from me to post .
regards

Please refer to below URL for proxy settings.
http://docs.oracle.com/cd/E25054_01/webcenter.1111/e12405/wcadm_rss.htm
Thanks & Regards,
Murali.
===========

When using wifi hot spot, firefox blocks transfer to such website and hence unable to connect to internet through such hot spot

Application Basics
Name: Firefox
Version: 30.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:30.0) Gecko/20100101 Firefox/30.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Garmin Communicator
Version: 4.2.0.0
Enabled: true
ID: {195A3098-0BD5-4e90-AE22-BA1C540AFD1E}
Name: Adobe Acrobat - Create PDF
Version: 1.2
Enabled: false
ID: [email protected]
Name: Skype Click to Call
Version: 7.2.15747.10003
Enabled: false
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Important Modified Preferences
accessibility.blockautorefresh: true
accessibility.browsewithcaret: true
accessibility.typeaheadfind: true
browser.cache.disk.capacity: 0
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.enabled: false
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20140605174243
browser.startup.homepage_override.buildID: 20140605174243
browser.startup.homepage_override.mstone: 30.0
browser.urlbar.default.behavior: 2
dom.mozApps.used: true
extensions.lastAppVersion: 30.0
gfx.direct3d.last_used_feature_level_idx: 0
network.cookie.lifetimePolicy: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1403603792
places.history.enabled: false
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.cpd.offlineApps: true
privacy.cpd.siteSettings: true
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
privacy.sanitize.timeSpan: 0
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1402895491
Graphics
Adapter Description: Intel(R) HD Graphics 4000
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Adapter RAM: Unknown
Device ID: 0x0166
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 12-18-2013
Driver Version: 10.18.10.3379
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: true
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.6
Version in use: 4.10.6
NSS
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSMIME
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSSL
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSUTIL
Expected minimum version: 3.16
Version in use: 3.16

Did you get an error message? What did it say?
'''Control Panel\Network and Internet\Network and Sharing Center'''
Check the settings for that WIFI.

CS5.5 Subscription: Unable to connect to internet.

So, for two days, I've been unable to use either of the two Creative Suite 5.5 Master Collection licenses I'm currently subscribing to and paying a pretty penny for. Yesterday, Adobe customer support informed me that something must be "wrong with my machine", so, I dutifully did all of the testing, cleaning up, repairing and troubleshooting I could think of on that machine. CS5.5 Subscription on that one still doesn't work. Today, I attempted to use the other license I'm paying for on a different machine, with the exact same results.
When attempting to open any of the products, I get this message:
When I click Try Again, I get this one, which stays on this screen and never changes:
As you can imagine, I'm fairly certain I'm connected to the internet, since I'm typing this in the forum right now. I've attempted a wired connection, wireless connection and my MiFi connection, restarted, stood on one foot while patting my head, and attempted to bribe my software, with the same results each time.
Specs:
MacBook Pro 15" / Snow Leopard
Mac Mini / Lion
To reiterate, here are the steps I've attempted:
Repair permissions
Repair disk
Multiple restarts
Move from Wired to Wireless connection
Move from Wireless to MiFi connection
This isn't an issue with Lion, since it's occuring on both machines with different serial numbers. This is a problem with Adobe's subscription licensing server, or a problem with the way the software connects to it. Any assistance is appreciated, and the quicker I get it, the happier I'll be, since this has already caused me to fall behind on a deadline. At this point, I'm considering canceling the monthly subscription and reinstalling my version of CS4, which, while missing some of the features I upgraded to CS5.5 for, at least works.
Side note for Adobe personnel: It's not entirely clear in your FAQs for the subscription editions that you have to be connected to the internet every single time you open the software.

I'm getting that exact same message. Started today and it's driving me crazy. I can't find any information on error code 194:100. I talked to customer support through chat and they hadn't any clue as to what error 194:100 could be. They said it was technical and I should contact tecnical support. Why anyone would want to talk to a support agent that cannot fix problems and just generally tells you to call the real customer support, I have no idea.
This is the second time I've had problems with my software activation. It was slightly different but similar in several ways. I figured I'd metion some specifics to see if it matches more or less anyone else's problems.
Both times I've noticed I've had trouble with my adobe account id. Specifically I can log in just fine but I can't access the acount info section. I get a page not found error.
This time around I noticed many other weird things.
Adobe updater disappeared from my mac.
Encoder refused to encode certain premeire sequences.
Premiere froze on export of those same sequences.
And I first got the Unable to Connect to internet error this morning. Followed shortly The "Activation Failure error code #194:100" one. I've uninstalled and reinstalled several times and Premiere seems to run fine at least once. But if I try to open any other adobe application or if I load another project I get error 194:100.
The first time I had Activation Problems I ended up having to return the software, wait for the refund, delete my adobe id account, create a new one and buy it again with the new account.
I hope this is not a repeat of last time cause I'm seriously not rebuying defective software a third time.
I don't know if this helps but your problem seemed similar to mine.
15" Macbook pro 2.66 GHz Intel Core i7
NVidia GeForce GT 330M
OSX 10.6.8Snow Leopard
4GB DDR3 Ram

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Mac mini unable to connect to internet

I just bought a Mac mini Core Duo and tried to connect to internet through my existing router (D-Link DI-714P+). My router is working find with my 2 existing PC desktop (wired) and a PC notebook (wireless). My Mac mini seems to be able to detect and connect to my network but not internet. When I tried to access the internet, the message "You are not connected to the internet" appears. I also tried to disable the security of my network by disabling the WEP and WPA but it still won't work.
Any help?

Kim,
Welcome to the discussions!
DId you log into your router and make sure it has extra DHCP addresses to hand out? Some have limits to only let 3 or 5 or 10 computers attach at one point.
Also - best to connect it with a wire first. Make sure it works fine with DHCP and then enable the wireless. There is no problem having both active all the time - you can troubleshoot and test both - and once the wireless works, disconnect the wired connection...
Lastly - open Safari the next time you can't get an address using wireless only. Click on the "network diagnostics" button - it is a really good tool to review your network settings and prompt you to restart the other devices at the correct times to see if the problem is elsewhere.
Post back what you try - there's a good chance we can help you out.

TouchSmart 600 unable to connect to Internet & email accounts. Error Code 0x80070057

TouchSmart 600 unable to connect to Internet & email accounts. Receive Windows Network Diagnostics error message "An unexpected error has occurred. The troubleshooting wizard can't continue" Error Code: 0x80070057. Using old laptop to send this message. Tried to restore back to a certain date but was only able to restore back to latest Windows download which did not correct my problem. Any help appreciated. Thanks.

I have the same problem connecting to the Internet that it is. It is more intermittent than permanent though. I have updated the driver from HP site, but no change. From the searches on the web problem seems more widespread though. HP do something! Please!

How to connect to Internet through a LAN

Hi everybody !!!
Please show me how to connect to Internet through a LAN (through another computer).
On Windows XP system, i use the following informations to do that:
+ My IP: 192.168 .1.45
+subnet mask: 255.255.255.0
+default getway: 192.168.1.12 (IP of another machine)
+Preferred DNS server: 85.255.192.2
+Alternate DNS server: 195.131.52.130
and in IE i use the proxy server: 192.168.1.12:8080
Thanks alot !!!

Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

Unable to Connect to SAP through SAPGUI

Dear all,
We have a PI 7.11 dual stac ksystem on Linux, oracle.
we are able to connect to the server through putty, but not able to launch xmanager as it is sayign XDMCP error....
Also unable to connect to SAP through SAP GUI
we are getting wsaewouldblock resource temporarily unavailable
I am connecting to servers through CISCO VPN......
Thanks,
Murali L.

[root@PIPROD work]# ps -ef | grep dw
pipadm    2042 23763 0 19:34 ?        00:00:01 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
root      8373 6880 0 19:52 pts/1    00:00:00 grep dw
gdm      17480 17397 0 15:48 ?        00:00:00 /usr/libexec/gdmgreeter --gtk-module=gail:atk-bridge:/usr/lib64/gtk-2.0/modules/libkeymouselistener:/usr/lib64/gtk-2.0/modules/libdwellmouselistener
pipadm   23763 23690 0 17:28 ?        00:00:00 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23777 23763 0 17:28 ?        00:00:08 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23778 23763 0 17:28 ?        00:00:05 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23781 23763 0 17:28 ?        00:00:10 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23783 23763 0 17:28 ?        00:00:04 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23786 23763 0 17:28 ?        00:00:03 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr1
(23762) New Child Process created.
(23762) Starting local Command:
Command: ms.sapPIP_DVEBMGS00
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr2
(23763) New Child Process created.
(23763) Starting local Command:
Command: dw.sapPIP_DVEBMGS00
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
Thu Oct 20 17:28:21 2011
DpVmcInit: initialize vmc
DpVmcInit: vm lib loaded
DpVmcInit: vm linked with kernel
DpVmcInit: vm native libs loaded
ICM up and operational (pid: 23775) ***
[root@PIPROD work]# more stderr3
(23764) New Child Process created.
(23764) Starting local Command:
Command: ig.sapPIP_DVEBMGS00
           -mode=profile
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
NiInit3: NI already initialized; param 'maxHandles' ignored (init=1;par=202;cur=2048)
***LOG Q0I=> NiPConnect2: 172.28.30.45:3300: connect (111: Connection refused) [nixxi.cpp 3142]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 172.28.30.45:3300) [nixxi.cpp    3142]
[root@PIPROD work]# more dev_ms
trc file: "dev_ms.new", trc level: 1, release: "711"
[Thr 47613442779232] Thu Oct 20 17:28:21 2011
[Thr 47613442779232] ms/http_max_clients = 500 -> 500
[Thr 47613442779232] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid   390 (AMD/Intel x86_64 with Linux)
relno      7110
patchlevel 0
patchno    81
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
pid        23762
[Thr 47613442779232] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 23762) [msxxserv_mt. 2174]
[Thr 47613442779232] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 47613442779232] load acl file = /usr/sap/PIP/SYS/global/ms_acl_info
[Thr 47613442779232] MsGetOwnIpAddr: my host addresses are :
[Thr 47613442779232]   1 : [172.28.30.45] PIPROD (HOSTNAME)
[Thr 47613442779232]   2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 47613442779232] *** ERROR => NiHsLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhsl.cpp 527]
[Thr 47613442779232]   3 : [192.168.122.1] 192.168.122.1 (NILIST)
[Thr 47613442779232] MsHttpInit: full qualified hostname = PIPROD
[Thr 47613442779232] HTTP logging is switch off
[Thr 47613442779232] set HTTP state to LISTEN
[Thr 47613442779232] *** I listen to port sapmsPIP (3600) ***
[Thr 47613442779232] *** I listen to internal port 3900 (3900) ***
[Thr 47613442779232] *** HTTP port 8100 state LISTEN ***
[Thr 47613442779232] CUSTOMER KEY: >Z2073759310<
[Thr 47613442779232] build version=711.2009.08.31
[Thr 47613442779232] Thu Oct 20 17:28:35 2011
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
Edited by: Murali Lakkoju on Oct 20, 2011 4:14 PM

I am unable to connect to internet through my tata photon ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

Similar Messages

Maybe you are looking for