I am unable to connerct to the internet in my house and was previously able to do so

I am unable to connect to the internet in my home and was previously able to do so. can you help?

If this is the problem following the instruction.  Frequently it is a hardware problem.
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Otherwise try (assuming that other devices see your network)
- A reset. Nothing wil be lost
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power of and then back on your router.
- Reset network settings: Settings>Genral>Reset>Reset Network Settings
iOS: Troubleshooting Wi-Fi networks and connections

Similar Messages

  • I have a Motorola SB6141 modem that is connected to a time capsule. I am unable to connect to the internet on my laptop and playstation 3

    Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
    I am unable to connect to my internet via. wifi on my Playstation.
    I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
    Please help?
    I tried being the most descriptive I could

    I am only able to connect to the internet on my main computer.
    What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
    When you open the airport utility on the main computer.. click on the TC what errors does it show?
    They will list in the summary.
    What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
    Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
    The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
    What model TC do you have??
    You can slow the LAN port down or specify the actual speed in the Gen1-4.

  • Unable to Connect to the internet using airport extrteme

    I am unable to connect to the internet using airport extreme It was working fine with my G3 & G4 iBooks but now I am unable to connect. I am able to connect directly to my Desktop connecting directly using ethernet. I am also receiving a strong signal from the airport base station. Please help. Thank you.

    Try the following, in order, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, AirPort Extreme Base Station (AEBS), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • WVC80N - Internet Gateway UPnP discovery failure message \ unable to view over the internet

    I have the WVC80N.  I recently got the new Comcast modem \ wifi but the Wifi is junk and had a lot of problems (loss connection, range etc) so I had Comcast "bridge" it so I just use my old wifi (LinkSys E1200).   I have TZO to handle remote viewing.  Everything was working great for about two weeks and we had a power outage.  Since then, I have been getting UPnP discovery message (in the status tab of the WVC80N camera site) and I am unable to view over the internet.  I get a 502 error usually but today I got extra info: "The socket connection to www.dfgehring.mylinksyscam.com failed.
    ErrorCode: 10060.  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond."
    I had Comcast do a "repair / reset" transmission to the modem and still get the problem.
    I found these step on the forum:
      1. Home Wirless Rounter administration page, find the UnPn settings and Turn off UnPn and save it. Wait for atleast 30 sec  and go the same page and Turn it back on.
      2. On your wireless camera Adminstraion page, go to "Options" and find the UnPn if it is already disabled go ahead and "enable" it also "enable" the "Alternate web connection" and save it. If it was already enable please disable it save the settings and enable back on.
     The above 2 steps resolved my issue and I could able to view my camera from outside of my home network.
    Still no luck.  Tried it several times.
    Could the power outage reset something on the modem or router to change this? 
    Thanks
    Darren

    That's what I thought. The power outage may have set the modem, router or camera settings back to factory defaults causing it to loose connection. First thing first, call comcast and check if the modem is still on bridge mode. The modem may have been set back to a modem/router mode due to power outage.
    You may test if the remote access is properly set up in the network by going to http://ping.eu. In that site, you will see your internet ip address, take note of that. Click on port check, enter your internet ip address and the port number you used in the alternate web access port then click Go. If it says closed, there something wrong in the settings of either the router or camera. In that case, I suggest you reset the router and camera and then reconfigure them.
    I found these articles online which could help you reconfigure your router and camera settings:
    How to set up your router
    How to set up router wireless setting
    Connecting camera to wireless network
    How to set up remote access on linksys camera
    How to set up TZO on the linksys camera
    Hope these helps.

  • Curve 9380 unable to connect to the internet via wifi

    I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.

    Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

  • Unable to connect to the internet please try again later

    I have a blackberry torch 9800, I don't have a data plan. I use a wifi signal with other phones, but my blackberry doesn't allow me to browse or view apps online.  The error "unable to connect to the internet please try again later" appears.  The phone has a clear signal of the wifi, i've tried various other hotspots, my other phones work perfectly.  The blackberry says it's connected to the wifi, but no internet browsing is possible.  What else can I do other than rip the battery out to re-boot?

    well that sux, are there any alternatives?

  • "Unable to connect to the internet, please try again" wifi issue

    I recently recieved my blackberry storm in the mail excited to use the wifi. I set it up including entering the correct security code a number of time for the "wep" security options and it recognizes the network. I believe it's connecting also, but when I open my browser the message of "Unable to connect to the internet,please try again." pops up. I have a verizon account with a data plan, but due to not wanting to use up my data plan I switched it off as only to rely on my wifi. What can I do? I've updated everything and tried so many things. Our wifi has never done this to any other device. PLEASE HELP!

    in the browser, go to the options and setthe default browser as "Hotspot browser" instead of "Internet Browser".
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • HT6001 After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

    After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT204400 I am trying to set up my apple tv and i am unable to connect to the internet because i need to get to an internet page to put in my password. HELPPPPPPPPP

    I am unable to connect to the internet because to log in i need to put in a password and to do that i need to get to a internet page. helppp

    There is no web browser on the ATV, as a result, it cannot be used with such Internet connections.
    Contact whomever provides support for the Wi-Fi service, they may be able to add the ATV to a whitelist to allow it to connect.

  • HT5622 Why am I unable to connect to the internet? I am next to my main computer which has no problems.

    Why am I unable to connect to the internet? I am next to my main computer which has no problems.

    Try the iPad forum, then:
    https://discussions.apple.com/community/ipad/using_ipad
    You'll need to include full details, including the model of iPad, the version of iOS, the exact nature and symptoms of the problem, and what if anything you've tried for correcting the problem.
    Regards.

  • I recently downloaded Mac OS X, my wifi is connected but I am unable to get onto the internet.  Help?

    I recently downloaded Mac OS X, my wifi is connected but I am unable to get onto the internet.  Help?

    Try restarting the computer or go into network settings and choose assist me at the bottom when your connection is highlighted in the sidebar and follow the prompts

  • RV042 behind P660 unable to connect to the internet

    Hi,
    I am a bit new to setting up dual wan router. I am currently having a Zyxel P660 Adsl router but rv042 is unable to connect to the internet as zyxel doesn't give it a I.P address. Thank you guys in advance.  

    Hello Rashmin,
    I am not that familair with the P660 but from looking over Zyxel's website it looks like a modem/router combo.  
    Is it possible to place the Zyxel into bridged mode, so that it only acts as a ADSL router and passes the public IP on to the RV042?  You may need to call your ISP to have them do this for you.
    When you are in bridged mode you will also probably have to configure the RV042's WAN port as a PPPoE connection and enter your ISP's credentials, so make sure they give you this when you speak to them about bridged mode.
    With some routers it is possible to plug in another router behind them and everything sort of works.  This is called a double NAT situation, and does prevent VPN from working.  However not even that is working here so I would definitely see about getting that modem into bridged mode.  Some ISPs also call it IP passthrough or one-to-one NAT, just tell them you want a public IP on your RV042's WAN port.
    Thank you for choosing Cisco,
    Christopher Ebert - Network Support Engineer
    Cisco Small Business Support Center
    *please rate helpful posts*

  • Zen x-fi and creative centrale "unable to connect to the internet"

    ? I have done everything the tech support has said to do but I have reached a dead end. I disabled windows firewall and the AVG antivirus on my computerbut I don't think that is the problem. This is were I reach a ead end.... I go to start, click on run, type in serices.msc, then when I try to start SSDP Discovery Service and Uni'versal Plug and Play Device Host I get error messages. The message for SSDP says " Could not start on local computer....Error079: The account specified for this service is different then the account specified in other services running in the same process"
    The message for Uni'versal plug says "Error 068: the dependency service or group failed to start"
    I don't know if this has anything to do with it but I have cable internet in my house that was set up on another computer and then a wireless router and I just use wireless on my computer. Thanks to anyone who can help!

    , To add more than one song at once, try holding down Ctrl while selecting songs.
    I'm not sure about your second question, my guess is that the sync list is just a list of files it will copy to your player..
    Centrale is known to not be very user friendly.. Do you know that you can also manage your player with Windows Explorer? You can make your own split-screen and use drag and drop to transfer files.

  • I downloaded some software and it has to be downloaded from the internet. DL complete and when I click on the pkg to install the software I get the following msg: The operation couldn't be completed. (com.apple.installer.pagecontroller error -1.)

    I downloaded some software and it has to be downloaded from the internet. DL complete and when I click on the pkg to install the software I get the following msg: The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.)
    Pls help.

    I bought HGTV home design software. It doesnt come w/ a installer disc, it gives you a link to dl the program. I did that and was left w/ a .mpkg file that I am unable to install do to the above msg.

  • How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

    How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

    The following has instructions: OS X Mavericks: Share your Internet connection

Maybe you are looking for

  • Is there a way to print an e-mail without also printing a long list of addresses?

    I am a recipient of some newsletters whose authors include recipient e-mail addresses in the To and CC fields. Occasionally I want to forward the newsletter to friends who are not on-line. (Yes, there are still some around.) I do this by printing the

  • Cannot save a pdf file. XP SP3, Firefox 5.0.

    When I try to save a pdf file to my computer, Firefox "hangs" and I have to close everything and exit Firefox. I am "saving" while Firefox is open. This happens every time I try to save a pdf file. I am able to save pdf files using IE as my browser.

  • Using the StringTokenizer But Have a Delimiter of "char" type

    I am using the java.util.StringTokenizer to break a String into tokens. The delimiter is common (i.e. ',') and I declare it as a char. I have a compilation error becasue the StringTokenizer requires the delimiter of the String type. How do I handle t

  • BDC code for a PUSHBUTTON

    Hi,   Can anybody please tell the  BDC CODE FOR A PUSH BUTTON. THANKS IN ADVANCE

  • Login problem - password box missing

    Usually when our computer was not used for some time at the idle mode, the screen display a password box so that we can type in our password and we can continue with our work. In my case, instead of typing the password, i click on one button beside i