I am unable to create a Bookmark. The /- is always grayed out.

I have followed the instructions for making a bookmark and no matter what the plus/minus icons at the bottom of the Bookmark window are grayed out. I have tried from a Chapter, Section and a Page. I have tried from within a table. It is always grayed out. Any suggestions, please.

This has already be replied to - complete with an example file to examine
Take a look / search in the earlier discussions

Similar Messages

Why are the songs that I uploaded to the iCloud always graying out?

I've uploaded 14,000 songs to the Cloud. Now most are grayed out. Sometimes they show up and sometimes they don't. This happens on my MacBook as well as my iPhone 6. I'm signed in so that isn't the issue.
Also, why did the iCloud delete a whole bunch of my uploads? These were CDs like Tool and a few collector's songs that aren't in general release?

hblibby wrote:
I've uploaded 14,000 songs to the Cloud.
How did you do this?

Unable to create or update the Custom Data Provider WIS 10853

Hi,
I have created the universe in designer then I created QAAWS. In the web intelligence tool, clicked for new document and then chosen web services under other data sources. After giving webservices detailed, I encountered the following error.
Error from Personal Datasource : Unable to create or update the Custom Data Provider: invalid information retrieved while trying to get the structure. (CDS 105109). (WIS 10853)
Can anyone help abt this problem? I wud very thankful for them.

Hi,
Can you post the wsdl URL. It would be of great help if we could have a look at the wsdl schema. Not all schemas are supported at the moment and hence the error. You can have a look at the limitations section in the documentation guide.
Regards
Rahul

Unable to create or update the Excel Personal data provider in Web Rich

Hi All,
Iam getting the below error message ,when iam using Excel as personal data provider in WEBI Rich Client.
"Unable to create or update the Excel Personal data provider in Web Rich Client Cannot open the workbook WIS:10872"
Please suggest a solution ,it helps a lot..
Regards
Mahesh

Hi,
Was this issue resolved? I see this post has been marked answered but there wasn't any information on what it took to resolve the issue.
We have our CMS and processing servers on Linux while our Scheduling servers are on Windows. The WEBI reports with external data providers fail to run on Infoview/ scheduler.
We were told this is addressed in FP 3.6 but that is not the case. We installed FP 3.6 but still continue to see these errors. It required us to manually deploy the ExtensionFactoryService package for enabling the refresh of such reports on infoview/schedulers. It also involves placing of the file used [.xls/.txt] on the linux server on the PersonalDPFiles directory.
No luck so far!!!
Any help would be greatly appreciated!
Thanks
Avinash

Error OAB-90061 unable to create connection to the remote server

hello
i have a problem with introspection: i want to introspect wls.
i installed wls on a virtual machine. zip archive, no installer.
i also installed ovab on my local virtual machine.
start ovab, conect to serverpool: ok. now i want to start a introspection. but i got only an error:
INTROSPECTION STARTED for: juriwls
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Creating local assemblybuilder.zip.
Local assemblybuilder.zip created.
Copying assemblybuilder.zip to remote machine.
Copy at 10%
Copy at 20%
Copy at 30%
Copy at 40%
Copy at 50%
Copy at 60%
Copy at 70%
Copy at 80%
Copy at 90%
Copy at 100%
Copy of assemblybuilder.zip complete.
Copying support scripts
Copy of support scripts complete
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Introspection failed
Error: Error initializing the remote connection.
Caused by: OAB-90061: Unable to create connection to remote server
Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
Action:
Double click on the failed node for detail
ok may the interfaces are down: checked, ok. static ip
tied to ping each other: no problem.
nslookup: everything perfect.
firewall off on each machine!
wls is started and in runnig mode!
variables set in .bashrc
so i dont know what to do. anybody else?
thanks in advance

thanks for help
in cli i entered: system-config-securitylevel-tui quiet port=http --port=ssh
well done introspection starts ... but after a while another error occurs
INTROSPECTION STARTED for: juri
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Introspection failed
Error: Error initializing the remote connection.
Caused by: OAB-90061: Unable to create connection to remote server
Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
Action:
Double click on the failed node for details.
INTROSPECTION STARTED for: juri
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Remote AssemblyBuilder is started and connected.
- START SUBMIT...
- END SUBMIT...
onProgress<juri>: started WLS dehydration (expect delays during domain template creation)
onProgress<juri>: started processing WLS configuration
onProgress<juri>: creating appliances for the servers in the domain
onProgress<juri>: Processor: 0 completed
onProgress<juri>: capturing application deployment plans
onProgress<juri>: determining the list of application deployments
onProgress<juri>: building target map
onProgress<juri>: Processor: 1 completed
onProgress<juri>: capturing cluster configuration
onProgress<juri>: building list of all clusters
onProgress<juri>: building cluster sub-assemblies
onProgress<juri>: Processor: 2 completed
onProgress<juri>: capturing Coherence Java option configuration
onProgress<juri>: processing setDomainEnv.sh
onProgress<juri>: processing config.xml
onProgress<juri>: adding rehydration scripts
onProgress<juri>: Processor: 3 completed
onProgress<juri>: creating package definition for domain
onProgress<juri>: Processor: 4 completed
onProgress<juri>: processing inputs/outputs
onProgress<juri>: Processor: 5 completed
onProgress<juri>: capturing data source configuration
onProgress<juri>: Processor: 6 completed
onProgress<juri>: start jms message bridge processing
onProgress<juri>: Processor: 7 completed
onProgress<juri>: start ldap processing
onProgress<juri>: Processor: 8 completed
onProgress<juri>: start listen address processing
onProgress<juri>: Processor: 9 completed
onProgress<juri>: capturing node manager configuration
onProgress<juri>: Processor: 10 completed
onProgress<juri>: capturing oracle home
onProgress<juri>: Processor: 11 completed
onProgress<juri>: validating truststore configuration
onProgress<juri>: server truststore configuration is valid
onProgress<juri>: Processor: 12 completed
onProgress<juri>: processing foreign jms connections
onProgress<juri>: Processor: 13 completed
onProgress<juri>: setting resource requirements
onProgress<juri>: Processor: 14 completed
onProgress<juri>: Processor: 15 completed
onProgress<juri>: creating appliance connections
onProgress<juri>: no managed servers found, nothing to do
onProgress<juri>: Processor: 16 completed
onProgress<juri>: capturing BAM configuration
onProgress<juri>: processing BAM managed server specific configuration files
onProgress<juri>: Processor: 17 completed
onProgress<juri>: authenticating admin credentials
onProgress<juri>: admin credentials authenticated
onProgress<juri>: Processor: 18 completed
onProgress<juri>: exporting security configuration
onProgress<juri>: Processor: 19 completed
onProgress<juri>: capturing file store configuration
onProgress<juri>: Processor: 20 completed
onProgress<juri>: adding ready metric data to appliance
onProgress<juri>: Processor: 21 completed
onProgress<juri>: adding contentdata to appliances+
onProgress<juri>: creating common resources
onProgress<juri>: adding admin server resources to appliance AdminServer
onProgress<juri>: adding appliance resources
onProgress<juri>: Processor: 22 completed
INTROSPECTION DONE for: juri
Introspection failed
Error: OAB-50002: Failed to create assembly for WLS domain.
Caused by: OAB-50042: Domain template creation failed.
Action: Check /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18246.out and /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18247.log for details. These log files will be on the remote system if this is a remote introspection. This problem must be resolved before introspection can succeed.
ok lets check these log files: cat on these logs.
these logs are EMPTY!!!
i dont know what to do now ...

In my template, the code is grayed out and I am unable to edit it. How do I unlock the code?

I have a website based on a template. (Dreamweaver CS6). Just recently, the "code view" in the template is grayed out, and I am unable to edit it. I can edit the template in design view. I would appreciate suggestions of how the code got grayed out- or locked up. Thanks in advance.

Thanks everybody- I found a thread on a forum which solved my problem. In Dreamweaver: Commands → Clean Up HTML → (make sure non-Dreamweaver Comments" is checked. This clean up made the template then editable.
Thanks everyone.

Unable to turn Wi-Fi or Bluetooth on or off because the setting is grayed out or dim., Unable to turn Wi-Fi or Bluetooth on or off because the setting is grayed out or dim.

Unable to turn Wi-Fi or Bluetooth on or off because the setting is grayed out or dim.

Try to re-set it as rudegar suggests. If that doesn't work, try a restore. If that doesn't work, try a restore as new.
If the settings are still grayed out, then your phone has suffered a hardware failure.

My iphone 4s only works when plugged in, experiences random crashes, and the wifi is grayed out?

First post here. I'm experiencing some pretty complicated issues with my iphone 4s of several years, which began yesterday at random. I'm sorry for the length, but if someone could read through all of this and help me out, I would be so grateful.
I started experiencing some complex issues with my iphone yesterday, seemingly at random. I was taking a phone call, and all of a sudden, my phone goes dark. The battery was between 50%-80% at the time. I immediately plugged it in, and the apple logo appeared and began to power on. When it came back on however, I immediately noticed some changes. For starters, the battery leapt to 100%. The top corner of my phone where the carrier and bars should be says "searching..." (this never goes away). When I go into settings, the wifi is grayed out and says "no wifi."
That's not the worst of it though. As of last night, the number of times my phone crashes has gotten progressively worse. Now, even when I plug my iphone in to a wall charger, it stays on for maybe 1-4 minutes before it crashes completely. After this, it sometimes restarts itself. Before the shut-down, there are usually some weird bars or colors that flash across the screen (it's always different). I'm running on ios5 (I just really like the layout so much more, so I never bothered updating).
I don't think I did anything out of the ordinary to my phone. I walked in the rain for a short while when it was in my back pocket, but I've done this many times before and I don't see how that could create massive water damage. Also, it worked perfectly fine for a few hours after I got home. Quite literally, this just happened out of the blue. No warning, no signals, nothing. So far, I've tried...
- turning it on and off (duh)
- doing a hard reboot by holding down the middle and top buttons, several times
- resetting the network settings
- turning off data roaming and toggling airplane mode on and off
I even attempted the freezer trick. I didn't put the phone in the actual freezer because I was worried about condensation, but I did set it down on an icepack. This seemed to keep it alive a little bit longer before crashing, but only marginally so. My original plan was to plug my phone into my computer and download all my pictures and whatnot before attempting a complete data wipe and factory reset, but this also seems impossible. When I plug the phone into my laptop, the little apple logo comes and goes, but it simply never powers on fully. And even if it did, I doubt it would stay on long enough for me to complete a download without things crashing.
I'm totally lost here. Is my phone wrecked? I'm sensitive about my privacy, so I'm not crazy about the idea of taking my phone to the apple store and having them make some sort of copy of my data. I'm also not crazy about uploading all of my phones data to iTunes or the cloud or something like that. In addition to this, I don't know how I would salvage my in-app data. That's also something I'm worried about. I can't attempt to update my ios without wifi or the ability to plug my phone into a computer. All of this would be a lot easier if I could keep my iphone on longer than 2 minutes.
I've had this phone for years. I really don't want to just let it die at random and never even know why. I just feel like this hit me out of nowhere. Any suggestions about what I could do? I'm willing to try everything. I'm planning on calling apple, but I was thinking of asking online first.
BONUS: if anyone could answer these extra questions (you don't have to), that would be awesome! When you do a complete data wipe and restore your iphone to factory settings, where does all of your data go? Is it actually *gone* for good? I'm not just talking about photos, but also internet history, in-app data, and youtube history from the youtube app. Does it disappear completely? Or does it get stored somewhere. Also, is there anyway to downgrade a new iphone to an earlier ios without jail breaking it? I've pretty much lost hope with this phone, but if I get a new one, I just wish there was some way to keep using the old ios I'm used to.
Thanks so much to anyone who can answer these questions.

I have tried everything
If that is the case, by definition there is nothing left you can do...
Did you try connecting to another computer? Did this computer ever detect the phone? Does the USB system on your computer work normally with other devices? What is your computer OS version? iTunes version??

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Dictation is not working in the reminders app on iPhone 4s IOS6. The microphone is grayed out. How do I re-enable the microphone?

Dictation is not working in the reminders app on iPhone 4s IOS6. The microphone is grayed out. How do I re-enable the microphone?

One day I tried to dictate a note and discovered the microphone was grayed out. As someone suggested I did a hard reset of my iPhone 4S and that didn't solve the problem.
Then I had an epiphany. I use the Notes app a lot and have a lot of Notes stored in the app. I tried deleting some of my many notes and "viola!" the microphone is black again. My guess is the app has some kind of storage limit and when you hit that limit, the microphone is automatically turned off. Anyway, that's my theory and I'm sticking to it.
Hope this helps.

When I click on a result of a Google search and then go that web site, the Back button on the toolbar is grayed out and I cannot return to the search results.

When using FF3.6 and making a Google search, when I click on a result and then go that web site, the Back button on the toolbar is grayed out and I cannot return to the search results without going to History. This does not happen all the time; about 1/2 of the time.
This problem is not limited to Google, but occurs with other sites as well.

If you are talking about searches from - http://www.google.com/ - are you logged into a Google account all the time? If so, check your "Search Settings" from the "gear" in the upper-right corner of that Google search page and see if you have '''Open search results in a new browser window.''' check-marked, at the bottom of that preferences page. When that is check-marked and you have Tab options in Firefox set to '''Open new windows in a new tab instead''', you will get search results always opening in a new tab instead of the same tab. As to why that works different for "sponsored links" I don't know, I haven't seen the "sponsored links" for years now, I have a GM script that blocks those advertisements.

How can I uncheck "Enable disk use" in iTunes for my iPod? The option is grayed out, and permanently checked.

When I plug in my iPod Nano (6th generation) and launch iTunes, the device appears in the sidebar as normal, but the option to check or uncheck "Enable Disk use" in the Summary pane for the iPod is grayed out. Currently, the box is checked, so "Enable disk use " is turned on -- but what I want to do is UNcheck it and turn it off.
But nothing I've tried so far has successfully ungrayed the "Enable disk use" box. Help!
Question: How can I ungrey the "Enable disk use" option in my iPod's Summary panel in iTunes, allowing me to uncheck it?
Alternately, is there any other way to turn off "Enable disk use," using some esoteric workaround? Thanks!

Set it to sync automatically. Disabling that option isn't possible for an iPod set to sync manually, as it shows up as a disk as part of the sync process, and iTunes has no way of knowing when you're done syncing an iPod set to do so manually.
(59725)

What is the Compatibility Tab grayed out for applications on some network shares, but not others?

I have a network share with an executable file located in it. If I browse to the share by UNC path from a Windows 7 pro workstation and go to the compatibility tab of the .exe, the options are grayed out.
I have another network share with an executable file located on it. This share and workstation are at a different location, unrelated to the first example. If I browse to the share by UNC path from a Windows 7 pro Workstation and go to the compatibility
tab of the .exe file, the options are not grayed out, and I can check or uncheck what ever I need to.
Both shares are located on a Server 2008 R2 system w/sp1. Both workstations are joined to the same domain as the server they are connecting to the UNC path on. Both shares have given the user connecting full access on the smb sharing and ntfs sharing.
Someone please tell me how to make the compatibility tab not grayed out. Here is a screen shot of the comapatibility tab of the .exe file from both shares:

Hi,
You can use
Troubleshoot compatibility to set the application to Compatibility Mode.
You can right-click the application’s shortcut and click Troubleshoot compatibility.
Please refer to the similar thread and the third-party article below:
Compatibility mode greyed out on exe that is on a mapped drive???
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/compatibility-mode-greyed-out-on-exe-that-is-on-a/03c93e47-3d66-485c-b28f-73d06bc793d5
Windows 7: Compatibility Mode
http://www.sevenforums.com/tutorials/316-compatibility-mode.html
In addition, since it is related to windows 7, you can ask in the forum below for further assistance if the issue persists:
Windows 7IT Pro Forums:
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Best regards,
Susie
Thanks, but I read that link before I posted this. Even by running the compatibility wizard, you still can't edit the compatibility settings on Windows 7.

Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5?

Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5? I have an unlocked TMobile phone. My husband has the same phone, plan, and set up; his picture messages work fine.

Check this it maybe the problem
Settings > Messages > MMS Messaging > is it on?
Hope that helps

Why is the "Sign Document" grayed out and unusable on my Mac?

Why is the "Sign Document" grayed out and unusable on my Mac? Please help.

Check this it maybe the problem
Settings > Messages > MMS Messaging > is it on?
Hope that helps

I am unable to create a Bookmark. The /- is always grayed out.

Similar Messages

Maybe you are looking for