I am unable to create VM in my ESXI5.5 Server in VMWARE9.0
Hi All
I am unable to create VM in my ESXI SERVER5.5, Present i am using INTEL XEON HP XW8600 WORKSTATION, i am Enable VIRTUALIZATION TECHNOLOGY in BIOS,
Then i am install VMWARE 9.0 in this Machine and i am created one ESXI5.5 in VMWARE, then a am intall VSphere5.5 in my local machine, before install ESXI and i am enable Intel VT-x in VM Settings,
Then i am connect ESXI5.5 from VSphere5.5 then i am try to create VMWare i am getting below error,
Please resolve the issue friends,
Regards
Muralikrishna
mail:[email protected]
Hi a.p,
I know this is not the right place, I apologize for that.
Allow me a question,
Currently, I need to expand to 2 CPU my ESXi 5.5 server to install more RAM, but I'm ot sure if I can install a second CPU with my current license (see pic) I read in this forum That the phrase "Licensed for 1 physical CPU" not Refers to the maximum number of CPUs That can be installed, just the number of CPUs That are already installed.
Is that true? I need a second free license? I'm a bit desperate. ;(
Thanks
Similar Messages
-
Unable to create a file in Application Server using OPEN DATASET stattement.
I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.You can use following code to capture the error.
TRY.
OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
CATCH CX_ROOT
INTO EXCEPTION.
CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
RECEIVING
RESULT = V_MSG.
MESSAGE v_msg
TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful. -
Error OAB-90061 unable to create connection to the remote server
hello
i have a problem with introspection: i want to introspect wls.
i installed wls on a virtual machine. zip archive, no installer.
i also installed ovab on my local virtual machine.
start ovab, conect to serverpool: ok. now i want to start a introspection. but i got only an error:
INTROSPECTION STARTED for: juriwls
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Creating local assemblybuilder.zip.
Local assemblybuilder.zip created.
Copying assemblybuilder.zip to remote machine.
Copy at 10%
Copy at 20%
Copy at 30%
Copy at 40%
Copy at 50%
Copy at 60%
Copy at 70%
Copy at 80%
Copy at 90%
Copy at 100%
Copy of assemblybuilder.zip complete.
Copying support scripts
Copy of support scripts complete
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Introspection failed
Error: Error initializing the remote connection.
Caused by: OAB-90061: Unable to create connection to remote server
Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
Action:
Double click on the failed node for detail
ok may the interfaces are down: checked, ok. static ip
tied to ping each other: no problem.
nslookup: everything perfect.
firewall off on each machine!
wls is started and in runnig mode!
variables set in .bashrc
so i dont know what to do. anybody else?
thanks in advancethanks for help
in cli i entered: system-config-securitylevel-tui quiet port=http --port=ssh
well done introspection starts ... but after a while another error occurs
INTROSPECTION STARTED for: juri
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Introspection failed
Error: Error initializing the remote connection.
Caused by: OAB-90061: Unable to create connection to remote server
Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
Action:
Double click on the failed node for details.
INTROSPECTION STARTED for: juri
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Remote AssemblyBuilder is started and connected.
- START SUBMIT...
- END SUBMIT...
onProgress<juri>: started WLS dehydration (expect delays during domain template creation)
onProgress<juri>: started processing WLS configuration
onProgress<juri>: creating appliances for the servers in the domain
onProgress<juri>: Processor: 0 completed
onProgress<juri>: capturing application deployment plans
onProgress<juri>: determining the list of application deployments
onProgress<juri>: building target map
onProgress<juri>: Processor: 1 completed
onProgress<juri>: capturing cluster configuration
onProgress<juri>: building list of all clusters
onProgress<juri>: building cluster sub-assemblies
onProgress<juri>: Processor: 2 completed
onProgress<juri>: capturing Coherence Java option configuration
onProgress<juri>: processing setDomainEnv.sh
onProgress<juri>: processing config.xml
onProgress<juri>: adding rehydration scripts
onProgress<juri>: Processor: 3 completed
onProgress<juri>: creating package definition for domain
onProgress<juri>: Processor: 4 completed
onProgress<juri>: processing inputs/outputs
onProgress<juri>: Processor: 5 completed
onProgress<juri>: capturing data source configuration
onProgress<juri>: Processor: 6 completed
onProgress<juri>: start jms message bridge processing
onProgress<juri>: Processor: 7 completed
onProgress<juri>: start ldap processing
onProgress<juri>: Processor: 8 completed
onProgress<juri>: start listen address processing
onProgress<juri>: Processor: 9 completed
onProgress<juri>: capturing node manager configuration
onProgress<juri>: Processor: 10 completed
onProgress<juri>: capturing oracle home
onProgress<juri>: Processor: 11 completed
onProgress<juri>: validating truststore configuration
onProgress<juri>: server truststore configuration is valid
onProgress<juri>: Processor: 12 completed
onProgress<juri>: processing foreign jms connections
onProgress<juri>: Processor: 13 completed
onProgress<juri>: setting resource requirements
onProgress<juri>: Processor: 14 completed
onProgress<juri>: Processor: 15 completed
onProgress<juri>: creating appliance connections
onProgress<juri>: no managed servers found, nothing to do
onProgress<juri>: Processor: 16 completed
onProgress<juri>: capturing BAM configuration
onProgress<juri>: processing BAM managed server specific configuration files
onProgress<juri>: Processor: 17 completed
onProgress<juri>: authenticating admin credentials
onProgress<juri>: admin credentials authenticated
onProgress<juri>: Processor: 18 completed
onProgress<juri>: exporting security configuration
onProgress<juri>: Processor: 19 completed
onProgress<juri>: capturing file store configuration
onProgress<juri>: Processor: 20 completed
onProgress<juri>: adding ready metric data to appliance
onProgress<juri>: Processor: 21 completed
onProgress<juri>: adding contentdata to appliances+
onProgress<juri>: creating common resources
onProgress<juri>: adding admin server resources to appliance AdminServer
onProgress<juri>: adding appliance resources
onProgress<juri>: Processor: 22 completed
INTROSPECTION DONE for: juri
Introspection failed
Error: OAB-50002: Failed to create assembly for WLS domain.
Caused by: OAB-50042: Domain template creation failed.
Action: Check /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18246.out and /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18247.log for details. These log files will be on the remote system if this is a remote introspection. This problem must be resolved before introspection can succeed.
ok lets check these log files: cat on these logs.
these logs are EMPTY!!!
i dont know what to do now ... -
Unable to create a connection to application server
I am using JDev 10.1.3.0.3
I also have standalone OC4J10.1.3 installed on my system.
I am trying to create a connection to the application server by providing the correct username,pwd of the OC4J instance.I've alo checked correctness of rmi port.My oc4j instance is using port 8889 for http.But on saying test connection,it continues to test forever without returning any messages.Hi,
the ormi port - the default is 23791 - is what you need, not the http port. The password should be the one of oc4jadmin (assuming you run OC4J 10.1.3)
Frank -
Playbook unable to create an IMAP connection to server
I’m running my own (OSX Lion) server. It's working with other clients (including the Playbook browser via webmail interface) however the playbook Messages app refuses to establish an IMAP connection.
It returns the error ‘Your Information for IMAP server (domain name) has changed or is incorrect. Please check your account settings’.
Interestingly the Playbook and server are both set to use SSL but the server log returns an error that the playbook is trying to connect using an unsupported authentication method ‘Method=PLAIN’. (If I change the server settings to allow PLAIN authentication, the playbook error changes to ‘your imap server was unreachable’).
Anyone have any ideas? Does the playbook really use plain authentication, even when set to use SSL?
This problem is forcing me to continually go back to using my iphone for email.Check all the ports and configure same in playbook
-
Unable to Load Database/Unable to create database.
RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild. -
Unable to create a report in bi publisher 10g
Hi All,
Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
Operation failed: /abcd/abcd.xdo.
When we tried to create a report with the existing name, it is saying
An object with the same name already exists: /crm/crm.xdo
I can say this is not any permissions problem, I have logged inwith Administrator user.
ThanksHi,
Can any one..??? -
Unable to create report. Query produced too many results
Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
<br>
<br>
Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace: at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
ORA-01658: unable to create INITIAL extent for segment in tablespace
NEW REPOSITORY INSTALLATION ERROR!!
I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
After pressing the Install button in the RAU:
-I take public synonyms
-I scheck the box for "Support Designer Objects", then
-The Repository size is Medium
-I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
After Starting, the Installation began an stop by installing some Tables like schown :
Operation: Started : 07/03/04 20:26:32
Reading File: cktabs.sql
Object : TABLE CDDL_TMP_TBL
Executing statement(s)...
Verifying...
.and so on till....uns so weiter bis
Reading File: cktabs.sql
Object : TABLE RM$INFO
Executing statement(s)...
Error Submitting Definition: User intervention required...
RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
Dumping Buffer...
CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
...End of Buffer
User Requested: Stop Process
When I read the Help of the Error the
CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
-pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
-And the installato still stop with the same Error.
Question: How schould I resolve this Configuration?
You could respond in ENGLICH, GERMAN or FRENCH
Thank you for your Help!You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
Regards
Sue -
Unable to create an encrypted disk image in Lion
disk utility gives the error Unable to create "Volume.dmg." (error - 60008) when creating an encrypted disk image. I am using the following steps:
1. Open disk utility
2. Select the disk (internal or external) to create the image on
3. Select File>New>Blank Disk Image…
4. Save As: 'Volume'
5. Name: Volume
6. Size: 50GB
7. Format: Mac OS Extended (Journaled)
8. Encryption: 128-bit AES encryption
9. Image Format: read/write disk image
10. Click the Create button
11. Password dialog appears
12. When I enter a password the dialog closes after entering only a few characters i.e. before I've finished typing, and the following error message displays:
Unable to create "Volume.dmg." (error - 60008)
I have previously, successfully, created encrypted disk images in Snow Leopard, and I don't know why I can't in Lion
Does anyone have any ideas?Thanks for this Thomas.
I've tried naming the image differently, but still received the error, I did however try different permutations for the password.
The error seems to happen if I use a purely numerical password string and occurs on input of the 10th numerical character, if I start with numerical character but use an alpha before the 9th number I can continue and create a password, and I can create a password if I start with an alpha and switch to numerals after the first alpha character, purely alphabetical passwords are fine too.
It seems that Lion doesn't like purely numerical passwords greater than 9 characters, whereas Snow Leopard wasn't so fussy. Seems it's a bit of a bug.
Thanks for your help -
Unable to create an encrypted disk image with Disk Utility
Hi:
With our upgrade to Lion a few weeks ago, we're now unable to create an encrypted disk image of any type using Disk Utility any more. This problem occurs on 3 different machines, and is reproducible whether one is using an internal HD or an external FW HD. We can successfully create nonencrypted disk images.
This is a duplicate post with all the details here: https://discussions.apple.com/message/18469359#18469359
We haven't had any luck with a solution trying various permissions fixes as helpfully suggested by other readers in response to the error message # (-60008 error), so I'm hoping that someone else has run across a solution from the encrypted disk image perspective and that this tag line will generate some help.
Thank you!Save As: 01 (on Desktop)
Name: 01
Size: 100 MB
Format: Mac OS Encrypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890
This says password strength is "Weak"
All works fine
Then I repeated this using:
Save As: 02 (on Desktop)
Name: 02
Size: 100 MB
Format: Mac OS Encypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890 and when I start to enter the next "1" I get the "Unable to create "02.dmg." (error -60008)
OS 10.7.4
Disk Utility Version 12.1.1 (353) -
After upgrade to CF9, CFIMAGE "Unable to create temporary file" error
We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc -
Rep-0118:Unable to create temporary file error in Report Builder
I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
VijayYou have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.
-
Unable to create image buffer after RAM preview
Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
Some more details about my comp:
1920x1080 @ 29.97
Ray-traced 3D
About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
Running Windows 7 Professional
i7 2600K
32GB RAM
2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
508GB free on my 2TB internal drive where the project and cache lives
From my GPU info window in case it's useful:
Fast Draft:
Available
Texture Memory:
600.00 MB
Ray-tracing:
GPU
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 570/PCIe/SSE2
Version:
3.0.0
Total Memory:
1.20 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
4.2
Devices:
2 (GeForce GTX 570, GeForce GTX 570)
Current Usable Memory:
1.04 GB (at application launch)
Maximum Usable Memory:
1.25 GBYeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
Mylenium -
Unable to create cluster, hangs on forming cluster
Hi all,
I am trying to create a 2 node cluster on two x64 Windows Server 2008 Enterprise edition servers. I am running the setup from the failover cluster MMC and it seems to run ok right up to the point where the snap-in says creating cluster. Then it seems to hang on "forming cluster" and a message pops up saying "The operation is taking longer than expected". A counter comes up and when it hits 2 minutes the wizard cancels and another message comes up "Unable to sucessfully cleanup".
The validation runs successfully before I start trying to create the cluster. The hardware involved is a HP EVA 6000, two Dell 2950's
I have included the report generated by the create cluster wizard below and the error from the event log on one of the machines (the error is the same on both machines).
Is there anything I can do to give me a better indication of what is happening, so I can resolve this issue or does anyone have any suggestions for me?
Thanks in advance.
Anthony
Create Cluster Log
==================
Beginning to configure the cluster <cluster>.
Initializing Cluster <cluster>.
Validating cluster state on node <Node1>
Searching the domain for computer object 'cluster'.
Creating a new computer object for 'cluster' in the domain.
Configuring computer object 'cluster' as cluster name object.
Validating installation of the Network FT Driver on node <Node1>
Validating installation of the Cluster Disk Driver on node <Node1>
Configuring Cluster Service on node <Node1>
Validating installation of the Network FT Driver on node <Node2>
Validating installation of the Cluster Disk Driver on node <Node2>
Configuring Cluster Service on node <Node2>
Waiting for notification that Cluster service on node <Node2>
Forming cluster '<cluster>'.
Unable to successfully cleanup.
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Event Log
=========
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 29/08/2008 19:43:14
Event ID: 1570
Task Category: None
Level: Critical
Keywords:
User: SYSTEM
Computer: <NODE 2>
Description:
Node 'NODE2' failed to establish a communication session while joining the cluster. This was due to an authentication failure. Please verify that the nodes are running compatible versions of the cluster service software.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{baf908ea-3421-4ca9-9b84-6689b8c6f85f}" />
<EventID>1570</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2008-08-29T18:43:14.294Z" />
<EventRecordID>4481</EventRecordID>
<Correlation />
<Execution ProcessID="2412" ThreadID="3416" />
<Channel>System</Channel>
<Computer>NODE2</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="NodeName">node2</Data>
</EventData>
</Event>
====
I have also since tried creating the cluster with the firewall and no success.
I have tried creating the node from the other cluster and this did not work either
I tried creating a cluster with just a single node and this did create a cluster. I could not join the other node and the network name resource did not come online either. The below is from the event logs.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 01/09/2008 12:42:44
Event ID: 1207
Task Category: Network Name Resource
Level: Error
Keywords:
User: SYSTEM
Computer: Node1.Domain
Description:
Cluster network name resource 'Cluster Name' cannot be brought online. The computer object associated with the resource could not be updated in domain 'Domain' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
The cluster identity 'CLUSTER$' may lack permissions required to update the object. Please work with your domain administrator to ensure that the cluster identity can update computer objects in the domain.I am having the exact same issue... but these are on freshly created virtual machines... no group policy or anything...
I am 100% unable to create a Virtual Windows server 2012 failover cluster using two virtual fiber channel adapters to connect to the shared storage.
I've tried using GUI and powershell, I've tried adding all available storage, or not adding it, I've tried renaming the server and changing all the IP addresses....
To reproduce:
1. Create two identical Server 2012 virtual machines
(My Config: 4 CPU's, 4gb-8gb dynamic memory, 40gb HDD, two network cards (one for private, one for mgmt), two fiber cards to connect one to each vsan.)
2. Update both VM's to current windows updates
3. Add Failover Clustering role, Reboot, and try to create cluster.
Cluster passed all validation tests perfectly, but then it gets to "forming cluster" and times out =/
Any assistance would be greatly appreciate.
Maybe you are looking for
-
Can I install windows 8.1 from windows ssd hard drive with bootcamp?
I recently bought a 2009 macbook pro wiht Maverick 10.9. I had a PC running W8.1 on a crucial ssd. The ssd is working fine, it was the motherboard that was broken. I was wondering if I could image a partition on the macbook with the image software
-
Before I upgraded my MBP to Mavericks, the Save As dialog box would reopen at the same size and position as it was when last closed. Now with Mavericks it always opens in the same position at a very small size. Is there a way to make it reopen at t
-
Authentification using external database
Hi ! I wonder if it is possible to use logins and passwords stored in a MySQL database to authentificate Oracle Portal 's users ? Thanks, Estelle
-
For some reason -- in Safari only I think -- me on a PC and several other Mac users are getting a Cookies error message when going to this page: Code: rosepilates.com/schedulefees/index.html ? It probably has to do with the iframe and VBScript cod
-
Downloaded v8.0.1 got 'unable to connect" with every url
FF worked prior to upgrade. This version works on another laptop on the same network. I have Comcast HS wireless network. Also have Norton anti-virus through Comcast.