I am unable to delete zombie bookmarks (no link) in Normal or Safe Mode Firefox 3.6.13 Mac 10.4.11, bookmarks disappear at random

Firefox 3.6.13 (Mac Mini, OS 10.4.11) has repeatedly been losing my bookmarks in random fashion. For example, all bookmarks in a single folder have disappeared. Randomly, my bookmarks toolbar is truncated to just 6 items, although all toolbar bookmarks remain visible in the Library. The Library will randomly lose the http location for two to four bookmarks and then those "zombie" bookmarks cannot be accessed, deleted, moved, or edited. I've tried Safe Mode, same problem. I've disabled all add-ons in Normal Mode, same problem. I've reverted to bookmark backups and everything is okay for a short time (minutes sometimes, hours others), then the problems reappear on different bookmarks. Totally frustrating and maddening.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Similar Messages

How do I fix this? "Firefox is unable to start correctly (0xc0000056)" I can't start in Safe Mode, either.

My Firefox does not open, at all. When I try to open i get the message that says "Firefox is unable to start correctly (0xc0000056)". I have tried to run the Firefox crash report, which also does not run. I'm unable to start in safe mode, also. All I get, is the above message...nothing else.

I'm not using that extension, so I do not know which files are used in addition to sessionstore.js and you need to check the profile folder yourself for suspect files.
This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]<br />
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore

Firefox 18.0.01 (Mac) Won't synch Bookmarks with older FF versions 9!0.5.8 and 10.4.11) How can I synch these versions? Thanks

Firefox just upgraded itself to 18.0.1 on my iMac (OSX 10.7.5, Lion)
I have been using " Synchronize! Pro " for ten years to synch (or Backup) my iMac to my three laptops.
The Laptops are all PPC (non-Intel) iBooks of various vintages, running OS X 10.5.8 and 10.4.11.
The synchs ran fine until yesterday, when FF 18.0.1 arrived
Synchronize! Pro synchronized the drnpcf9j.default folder in the Firefox's profiles folder from the pre-18.0.1 version to the same folder in the three PPC laptops running FF 3.6.24 and 3.6.28.
Now, with the upgrade to ver. 18.0.1, it won't synch. The bookmarks are now located in a folder named "Profiles" which contains two new folders , neither of them named the old "drnpcf9j.default" .
How can I synch (or back-up) my new Profiles or bookmarks to the three older iBooks)
The Firefox synch won't work because the older browsers don't have a synch setup in the "Tools" menu.
Suggestions dearly welcome.
Many thanks
--GG

You can save the bookmarks to another location and restore or import them into the older versions of Firefox from the bookmarks library window.

I am not able to bookmark any pages. When I add bookmark nothing happens. I tried safe mode and it still does not work, I also reset toolbars and still no go. Can you help?

working on an Imac 10.6.5 and firefox 3.6

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Unable to boot normal, in safe mode or from install DVD

When I walked into my office this morning and hit my keyboard to wake my Mac all I saw on the screen was a white mouse arrow and a black screen. I held down the power button to restart, it starts to boot and then stops at a gray screen telling me to hold down the power button and restart. Doing this brings me to the same screen. I have attempted the following:
Booting while holding the Shift key - this takes a bit longer but takes me to the same gray screen
Booting with the install DVD in and holding the "c" key - DVD spins a bit then gray screen
Booting while holding "option" and selecting the install DVD - DVD spins a bit then gray screen
Booting in Single User mode and ran "/sbin/fsck -fy" it returned - *** FILE SYSTEM WAS MODIFIED ***, ran it again and returned - ** The volume Macintosh HD appears to be OK
I am not sure where to go from here, and advice would be much appreciated.
Thanks,
Bob

I posted in the wrong forum, I am using 10.5, I have reposted this in that forum.

Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL.

Firefox 33.0.2 on Windows 8.1 64 bit. Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL and hit <enter>, in which case nothing happens at all.
I have found that issue reported for Ubuntu (https://support.mozilla.org/en-US/questions/1011935?esab=a&as=aaq) but not for Windows. The solution there to change the keyboard is not feasible since it's a laptop with a built-in keyboard.
I did not have this issue with FF 28 (I finally upgraded because I was getting BSODs) and I don't have this issue with any other Browser on same platform.
Any help appreciated.
Thanks.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

How can i get my bookmarks back, after mozilla crashed and got stuck in safe mode?

I was using mozilla as usual when suddenly it crashed and then my computer turned off. i restarted it and said it had gone into safe mode. i tried to restart the computer again but it was stuck on safe mode.
The bad part is that all my bookmarks are gone and apparently there is no way of getting them back.
please help!

See:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Did you check your hard drive with the chkdsk.exe utility?

Even after uninstalling and delete registry, my firefox always tend to showing pop up peek. disabling add on won't help. only safe mode temporary fix this

i've tried this:
1. uninstall (standard, use uninstaller and delete registry)
2. disabling all add on
3. reset firefoxs
4. alway download from firefox site
5. Scan for viruses
6. there is no problem in my other browser
firefox only work normally in safe mode
(how to insert my screenshot here?)

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

I can't open Firefox and I haven't saved my extensive bookmarks, which contains all my important websites. How can I start Firefox and save my bookmarks?

I have a Dell Inspiron E1505, and I use Kaspersky Internet Security. The past week, I've had problems opening Firefox - it has been slow. Today, it just won't open at all. At first I thought it was my Internet connection, so I called my provider, Comcast Cable. But I was also able to open Internet Explorer. I was told that I may have to remove Firefox, and redownload it, but it would erase all my bookmarks. How can I access Firefox and save my bookmarks?

Try starting Firefox in Safe Mode (Firefox Safe Mode, not Windows Safe Mode).
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, check out this article:
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
To export bookmarks to an HTML file that IE and other browsers can read, see [https://support.mozilla.com/en-US/kb/Exporting%20bookmarks%20to%20an%20HTML%20file Exporting bookmarks to an HTML file | How to | Firefox Help].
Any luck?

Unable to delete "Bookmarks Bar & Bookmarks Menu"

I synced my bookmarks with IE for the first time and then I decided to sync Safari bookmarks which was successful but now I am left with two empty and useless folders called "Bookmarks Bar" from Safari and "Bookmarks Menu" from IE which I am unable to delete or move to the bottom of the Bookmarks menu. This is inconvenient, unsightly and takes up space.
Can anyone tell me how to remove those folders? And are Apple aware of this error?

It's not an error, per se. These are default bookmark folders on in Safari, and thus are transferred to the iPhone when you sync Safari bookmarks. If you are still syncing Safari bookmarks, they will always be there, and you cannot alter that. If you no longer want to sync Safari bookmarks, are the folders in your IE bookmarks? If so, delete them from there. Then, in iTunes in the Info tab (with the iPhone connected and selected in the devices list), scroll down to Advanced Options and check the box to replace bookmarks, then click Apply.

Unable to delete nookmarks

I am using Safari 1.3.2. When I highlight a
bookmark and press 'delete' I get the spinning
colored small ball and I have to force quit
Safari. Therefore I am now unable to delete
any bookmark.
Thanks in advance for any help provided
which will help me solve this.

It means that it ignores any change to the Security IDentifier of the object (user object in Active Directory). If you're using Claims-enabled Web Applications, this must be used. For Classic Web Applications, this must be used if during the migration to
the new domain, sidHistory was not enabled (sidHistory migrates the AB\UserName objectSid value to XY\UserName sidHistory value).
For more information:
http://technet.microsoft.com/en-us/library/cc779590(v=WS.10).aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to delete file from trash because it's "in use" not locked.

I'm unable to delete a file from trash. I keep getting the following message: "The operation can’t be completed because the item is in use." I've confirmed the file isn't locked and I've tried renaming it but still no luck. I'm running OSX 10.8.4. Any thoughts?

Check the 'More Like This' discussions on the right hand column. I suspect you may find the answer there.
Ciao.

Unable to delete applet.....

Hi all,
I am unable to delete one applet which I have loaded in the card.
There are 2 applets, one is purse and other is loyalty. And am using shareable interface in which loyalty is the server and purse is the client. I can delete the purse applet but i can't delete the loyalty from the card.
Here is my code : There are in all 3 codes, one is purse, second is loyalty code and third is the shareable interface code. Can some one look at the code and tell me what's wrong in this programs.
package com.gemplus.examples.loyalty;
import javacard.framework.*;
import visa.openplatform.*;
public class Loyalty extends javacard.framework.Applet implements TestInterface
static byte points ;
protected Loyalty(byte[] buffer, short offset, byte length)
// data offset is used for application specific parameter.
// initialization with default offset (AID offset).
short dataOffset = offset;
if(length > 9) {
// Install parameter detail. Compliant with OP 2.0.1.
// | size | content
// |------|---------------------------
// | 1 | [AID_Length]
// | 5-16 | [AID_Bytes]
// | 1 | [Privilege_Length]
// | 1-n | [Privilege_Bytes] (normally 1Byte)
// | 1 | [Application_Proprietary_Length]
// | 0-m | [Application_Proprietary_Bytes]
// shift to privilege offset
dataOffset += (short)(1 + buffer[offset]);
// finally shift to Application specific offset
dataOffset += (short)(1 + buffer[dataOffset]);
// checks wrong data length
if(buffer[dataOffset] != 4)
// return received proprietary data length in the reason
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + offset + length - dataOffset));
// go to proprietary data
dataOffset++;
// points = 0;
// register this instance
register(buffer, (short)(offset + 1), (byte)buffer[offset]);
* Method installing the applet.
* @param bArray the array constaining installation parameters
* @param bOffset the starting offset in bArray
* @param bLength the length in bytes of the data parameter in bArray
public static void install(byte[] bArray, short bOffset, byte bLength) throws ISOException
/* applet instance creation */
new Loyalty (bArray, bOffset, (byte)bLength);
* Select method returning true if applet selection is supported.
* @return boolean status of selection.
public boolean select()
/* return status of selection */
return true;
* Deselect method.
public void deselect()
return;
public void process(APDU apdu) throws ISOException
          // check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
          ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
               apdu.setIncomingAndReceive();
          byte[] apduBuffer = apdu.getBuffer();
// writes the balance into the APDU buffer after the APDU command part
          creditPoints((byte)0x00);
          apduBuffer[5] = (byte)(points >> 8) ;
          apduBuffer[6] = (byte)points ;
// sends the APDU response
// switches to output mode
          apdu.setOutgoing() ;
// 2 bytes to return
          apdu.setOutgoingLength((short)2) ;
// offset and length of bytes to return in the APDU buffer
          apdu.sendBytes((short)5, (short)2) ;
     public void creditPoints(byte pTobeCredited)
points += pTobeCredited;
public Shareable getShareableInterfaceObject(AID client, byte param){
          if(param != (byte)0x00)
               return null;
     return (this);
second code is :
package com.gemplus.examples.oppurse;
* Imported packages
import javacard.framework.*;
import visa.openplatform.*;
import com.gemplus.examples.loyalty.*;
public class OPPurse extends javacard.framework.Applet
// the APDU constants for all the commands.
     private final static byte INS_GET_BALANCE = (byte)0x30 ;
     private final static byte INS_DEBIT      = (byte)0x31 ;
     private final static byte INS_CREDIT      = (byte)0x32 ;
     private final static byte INS_VERIFY_PIN = (byte)0x33 ;
     private final static byte INS_SET_NAME                    = (byte)0x34 ;
     private final static byte INS_GET_NAME                    = (byte)0x35 ;
// the OP/VOP specific instruction set for mutual authentication
     private final static byte CLA_INIT_UPDATE = (byte)0x80 ;
     private final static byte INS_INIT_UPDATE = (byte)0x50 ;
     private final static byte CLA_EXTERNAL_AUTHENTICATE = (byte)0x84 ;
     private final static byte INS_EXTERNAL_AUTHENTICATE = (byte)0x82 ;
// the PIN validity flag
private boolean validPIN = false;
// SW bytes for PIN Failed condition
     // the last nibble is replaced with the number of remaining tries
     private final static short      SW_PIN_FAILED = (short)0x63C0;
     private final static short SW_FAILED_TO_OBTAIN_SIO = (short)0x63D0;
     private final static short SW_LOYALTY_APP_NOT_EXIST = (short)0x63E0;
// the illegal amount value for the exceptions.
private final static short ILLEGAL_AMOUNT = 1;
// the maximum balance in this purse.
private static final short maximumBalance = 10000;
// the current balance in this purse.
private static short balance;
/*     byte[] loyaltyAID = new byte[]{ (byte)0xA0,(byte)0x00,(byte)0x00,(byte)0x00,
          (byte)0x19,(byte)0xFF,(byte)0x00,(byte)0x00,
          (byte)0x00,(byte)0x00,(byte)0x00,(byte)0x00,
          (byte)0x00,(byte)0x00,(byte)0x02,(byte)0x02};*/
/* Security part of declarations */
// the Security Object necessary to credit the purse
private ProviderSecurityDomain securityObject = null;
// the security channel number
byte secureChannel = (byte)0xFF;
// the authentication status
private boolean authenticationDone = false;
// the secure channel status
private boolean channelOpened = false;
     private byte[] nameBuffer = new byte[6];
* Only this class's install method should create the applet object.
protected OPPurse(byte[] buffer, short offset, byte length)
// data offset is used for application specific parameter.
// initialization with default offset (AID offset).
short dataOffset = offset;
if(length > 9) {
// Install parameter detail. Compliant with OP 2.0.1.
// | size | content
// |------|---------------------------
// | 1 | [AID_Length]
// | 5-16 | [AID_Bytes]
// | 1 | [Privilege_Length]
// | 1-n | [Privilege_Bytes] (normally 1Byte)
// | 1 | [Application_Proprietary_Length]
// | 0-m | [Application_Proprietary_Bytes]
// shift to privilege offset
dataOffset += (short)( 1 + buffer[offset]);
// finally shift to Application specific offset
dataOffset += (short)( 1 + buffer[dataOffset]);
// checks wrong data length
if(buffer[dataOffset] != 2)
// return received proprietary data length in the reason
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + offset + length - dataOffset));
// go to proprietary data
dataOffset++;
} else {
// Install parameter compliant with OP 2.0.
if(length != 2)
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + length));
          // retreive the balance value from the APDU buffer
short value = (short)(((buffer[(short)(dataOffset + 1)]) & 0xFF)
          | ((buffer[dataOffset] & 0xFF) << 8));
// checks initial balance value
if(value > maximumBalance)
ISOException.throwIt(ISO7816.SW_DATA_INVALID);
          // initializes the balance with the APDU buffer contents
balance = value;
// register this instance as an installed Applet
register();
// ask the system for the Security Object associated to the Applet
securityObject = OPSystem.getSecurityDomain();
// applet is personalized and its state can change
OPSystem.setCardContentState(OPSystem.APPLET_PERSONALIZED);
// build the new ATR historical bytes
byte[] newATRHistory = new byte[]
// put "OPPurse" in historical bytes.
(byte)0x4F, (byte)0x50, (byte)0x50, (byte)0x75, (byte)0x72, (byte)0x73, (byte)0x65
// !!! ACTIVATED IF INSTALL PRIVILEGE IS "Default Selected" (0x04). !!!
// change the default ATR to a personalized's one
OPSystem.setATRHistBytes(newATRHistory, (short)0, (byte)newATRHistory.length);
* Method installing the applet.
* @param installparam the array constaining installation parameters
* @param offset the starting offset in installparam
* @param length the length in bytes of the data parameter in installparam
public static void install(byte[] installparam, short offset, byte length )
throws ISOException
// applet instance creation with the initial balance
new OPPurse(installparam, offset, length );
* Select method returning true if applet selection is supported.
* @return boolean status of selection.
public boolean select()
validPIN = false;
// reset security if used.
// In case of reset deselect is not called
reset_security();
// return status of selection
return true;
* Deselect method.
public void deselect()
// reset security if used.
reset_security();
return;
* Method processing an incoming APDU.
* @see APDU
* @param apdu the incoming APDU
* @exception ISOException with the response bytes defined by ISO 7816-4
public void process(APDU apdu) throws ISOException
// get the APDU buffer
// the APDU data is available in 'apduBuffer'
byte[] apduBuffer = apdu.getBuffer();
// the "try" is mandatory because the debit method
// can throw a javacard.framework.UserException
try
     switch(apduBuffer[ISO7816.OFFSET_INS])
case INS_VERIFY_PIN :
     verifyPIN(apdu);
break ;
case INS_GET_BALANCE :
     getBalance(apdu) ;
break ;
case INS_DEBIT :
     debit(apdu) ;
break ;
                    case INS_SET_NAME :
                         setName(apdu);
                    break;
                    case INS_GET_NAME :
                         getName(apdu);
                    break ;
case INS_CREDIT :
     credit(apdu) ;
break ;
case INS_INIT_UPDATE :
if(apduBuffer[ISO7816.OFFSET_CLA] == CLA_INIT_UPDATE)
// call initialize/update security method
     init_update(apdu) ;
else
// wrong CLA received
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
break ;
case INS_EXTERNAL_AUTHENTICATE :
if(apduBuffer[ISO7816.OFFSET_CLA] == CLA_EXTERNAL_AUTHENTICATE)
// call external/authenticate security method
     external_authenticate(apdu) ;
else
// wrong CLA received
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
break ;
case ISO7816.INS_SELECT :
break ;
default :
// The INS code is not supported by the dispatcher
     ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED) ;
break ;
     }     // end of the switch
} // end of the try
          catch(UserException e)
// translates the UserException in an ISOException.
          if(e.getReason() == ILLEGAL_AMOUNT)
throw new ISOException ( ISO7816.SW_DATA_INVALID ) ;
//- P R I V A T E M E T H O D S -
     * Handles Verify Pin APDU.
     * @param apdu APDU object
     private void verifyPIN(APDU apdu)
// get APDU data
          apdu.setIncomingAndReceive();
// get APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// check that the PIN is not blocked
if(OPSystem.getTriesRemaining() == 0)
OPSystem.setCardContentState(OPSystem.APPLET_BLOCKED);
// Pin format for OP specification
// |type(2),length|nible(1),nible(2)|nible(3),nible(4)|...|nible(n-1),nible(n)|
// get Pin length
byte length = (byte)(apduBuffer[ISO7816.OFFSET_LC] & 0x0F);
// pad the PIN ASCII value
for(byte i=length; i<0x0E; i++)
// only low nibble of padding is used
apduBuffer[ISO7816.OFFSET_CDATA + i] = 0x3F;
// fill header TAG
apduBuffer[0] = (byte)((0x02 << 4) | length);
// parse ASCII Pin code
for(byte i=0; i<0x0E; i++)
// fill bytes with ASCII Pin nibbles
if((i & 0x01) == 0)
// high nibble
apduBuffer[(i >> 1)+1] = (byte)((apduBuffer[ISO7816.OFFSET_CDATA + i] & 0x0F) << 4);
else
// low nibble
apduBuffer[(i >> 1)+1] |= (byte)(apduBuffer[ISO7816.OFFSET_CDATA + i] & 0x0F);
// verify the received PIN
// !!! WARNING PIN HAS TO BE INITIALIZED BEFORE USE !!!
if(OPSystem.verifyPin(apdu, (byte)0))
// set PIN validity flag
validPIN = true;
// if applet state is BLOCKED then restore previous state (PERSONALIZED)
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
OPSystem.setCardContentState(OPSystem.APPLET_PERSONALIZED);
return;
     // the last nibble of returned code is the number of remaining tries
          ISOException.throwIt((short)(SW_PIN_FAILED + OPSystem.getTriesRemaining()));
* Performs the "getBalance" operation on this counter.
* @param apdu The APDU to process.
private void getBalance( APDU apdu )
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// writes the balance into the APDU buffer after the APDU command part
          apduBuffer[5] = (byte)(balance >> 8) ;
          apduBuffer[6] = (byte)balance ;
// sends the APDU response
// switches to output mode
          apdu.setOutgoing() ;
// 2 bytes to return
          apdu.setOutgoingLength((short)2) ;
// offset and length of bytes to return in the APDU buffer
          apdu.sendBytes((short)5, (short)2) ;
     private void setName(APDU apdu)
          // check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
          // the operation is allowed only if master pin is validated
     if(!validPIN)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
          byte[] apduBuffer = apdu.getBuffer();
          apdu.setIncomingAndReceive();
          for(short i=0,k=5;i<6;i++,k++)
               nameBuffer[i] = apduBuffer[k];
     }//end of setName
     private void getName(APDU apdu)
          // check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
               byte[] apduBuffer = apdu.getBuffer();
               for(short i=5, k=0;i<11;i++,k++)
                    apduBuffer=nameBuffer[k];
               apdu.setOutgoing();
               apdu.setOutgoingLength((short)6);
               apdu.sendBytes((short)5,(short)6);
     }//end of storeName
* Performs the "debit" operation on this counter.
* @param apdu The APDU to process.
* @exception ISOException If the APDU is invalid.
* @exception UserException If the amount to debit is invalid.
private void debit(APDU apdu) throws ISOException, UserException
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// the operation is allowed only if master pin is validated
     if(!validPIN)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
     // Gets the length of bytes to recieved from the terminal and receives them
// If does not receive 4 bytes throws an ISO.SW_WRONG_LENGTH exception
          if(apduBuffer[4] != 2 || apdu.setIncomingAndReceive() != 2)
          ISOException.throwIt(ISO7816.SW_WRONG_LENGTH) ;
          // Reads the debit amount from the APDU buffer
// Starts at offset 5 in the APDU buffer since the 5 first bytes
// are used by the APDU command part
          short amount = (short)(((apduBuffer[6]) & (short)0x000000FF)
| ((apduBuffer[5] << 8 ) & (short)0x0000FF00));
// tests if the debit is valid
if((balance >= amount) && (amount > 0))
// does the debit operation
balance -= amount ;
// writes the new balance into the APDU buffer
// (writes after the debit amount in the APDU buffer)
apduBuffer[7] = (byte)(balance >> 8) ;
apduBuffer[8] = (byte)balance ;
// sends the APDU response
apdu.setOutgoing() ; // Switches to output mode
apdu.setOutgoingLength((short)2) ; // 2 bytes to return
// offset and length of bytes to return in the APDU buffer
apdu.sendBytes((short)7, (short)2) ;
          /*short points = 10;
AID loyaltyID = JCSystem.lookupAID(loyaltyAID, (short)0, (byte)loyaltyAID.length);
          if(loyaltyID == null)
               ISOException.throwIt((short)(SW_LOYALTY_APP_NOT_EXIST));
          TestInterface sio = (TestInterface)(JCSystem.getAppletShareableInterfaceObject(loyaltyID, (byte)0x00));
          if(sio == null)
               ISOException.throwIt((short)(SW_FAILED_TO_OBTAIN_SIO));
          sio.creditPoints(points);*/
else
// throw a UserException with illegal amount as reason
throw new UserException(ILLEGAL_AMOUNT) ;
/* byte points = (byte)0x0A;
          //short points = 10;
AID loyaltyID = JCSystem.lookupAID(loyaltyAID, (short)0, (byte)loyaltyAID.length);
          if(loyaltyID == null)
               ISOException.throwIt((short)(SW_LOYALTY_APP_NOT_EXIST));
          TestInterface sio = (TestInterface)JCSystem.getAppletShareableInterfaceObject(loyaltyID, (byte)0x00);
          if(sio == null)
               ISOException.throwIt((short)(SW_FAILED_TO_OBTAIN_SIO));
          sio.creditPoints(points);*/
* Performs the "credit" operation on this counter. The operation is allowed only
* if master pin is validated
* @param apdu The APDU to process.
* @exception ISOException If the APDU is invalid or if the amount to credit
* is invalid.
private void credit(APDU apdu) throws ISOException
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// the operation is allowed only if master pin is validated and authentication is done
     if (!validPIN || !authenticationDone)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
          // gets the length of bytes to recieved from the terminal and receives them
// if does not receive 2 bytes throws an ISO.SW_WRONG_LENGTH exception
          if(apduBuffer[4] != 2 || apdu.setIncomingAndReceive() != 2)
throw new ISOException(ISO7816.SW_WRONG_LENGTH) ;
          // reads the credit amount from the APDU buffer
// starts at offset 5 in the APDU buffer since the 5 first bytes
// are used by the APDU command part
          short amount = (short)(((apduBuffer[6]) & (short)0x000000FF)
| ((apduBuffer[5] << 8) & (short)0x0000FF00));
// tests if the credit is valid
if(((short)(balance + amount) > maximumBalance) || (amount <= (short)0))
throw new ISOException(ISO7816.SW_DATA_INVALID) ;
else
// does the credit operation
balance += amount ;
* Performs the "init_update" security operation.
* @param apdu The APDU to process.
private void init_update( APDU apdu )
// receives data
apdu.setIncomingAndReceive();
// checks for existing active secure channel
if(channelOpened)
// close the openned security channel
try
securityObject.closeSecureChannel(secureChannel);
catch(CardRuntimeException cre2)
// channel number is invalid. this case is ignored
// set the channel flag to close
channelOpened = false;
try
// open a new security channel
secureChannel = securityObject.openSecureChannel(apdu);
// set the channel flag to open
channelOpened = true;
// get expected length
short expected = apdu.setOutgoing();
// send authentication result
// expected length forced to 0x1C
apdu.setOutgoingLength((byte)0x1C);
apdu.sendBytes(ISO7816.OFFSET_CDATA, (byte)0x1c);
catch(CardRuntimeException cre)
// no available channel or APDU is invalid
ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
* Performs the "external_authenticate" security operation.
* @param apdu The APDU to process.
private void external_authenticate( APDU apdu )
// receives data
apdu.setIncomingAndReceive();
// checks for existing active secure channel
if(channelOpened)
try
// try to authenticate the client
securityObject.verifyExternalAuthenticate(secureChannel, apdu);
// authentication succeed
authenticationDone = true;
catch(CardRuntimeException cre)
// authentication fails
// set authentication flag to fails
authenticationDone = false;
// close the openned security channel
try {
securityObject.closeSecureChannel(secureChannel);
} catch(CardRuntimeException cre2) {
// channel number is invalid. this case is ignored
// set the channel flag to close
channelOpened = false;
// send authentication result
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// send authentication result
ISOException.throwIt(ISO7816.SW_NO_ERROR);
else
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
* The "reset_security" method close an opened secure channel if exist.
* @return void.
public void reset_security()
// close the secure channel if openned.
if(secureChannel != (byte)0xFF)
try
// close the openned security channel
securityObject.closeSecureChannel(secureChannel);
catch(CardRuntimeException cre2)
// channel number is invalid. this case is ignored
// reset security parameters
secureChannel = (byte)0xFF;
channelOpened = false;
authenticationDone = false;
return;
and the 3rd code is:
package com.gemplus.examples.loyalty;
import javacard.framework.Shareable;
public interface TestInterface extends Shareable
// public void creditPoints(byte points) ;
          public void creditPoints(byte points) ;
Thanks in advance......

Thanks. I know they are not the same thing. A package cannot be deleted if it contains one or more applets.
I tried to delete by typing in the applet AID first, but it just doesn't work. And of course it doesn't work for package AID.
Both the package and applet AID are generated in JBuilder, which looks like this, package AID(6D 79 70 61 63 6B 61 67 31),
applet AID(6D 79 70 61 63 30 30 30 31),
instance AID(6D 79 70 61 63 30 30 30 31)
I've tried those three AIDs, it's not working.
Thanks.

Unable to delete Address Book File

I am unable to delete nor copy over an Address Book file that I have on an external HD connected via Airport Extreme. When I connect the HD directly to my Macbook Pro, I am able to delete the file - but not via Airport Extreme. When I attempt to delete the file, I get a message from Trash as follows: The operation cannot be completed because the item "Metadata" is in use. Same message when I attempt to replace the file with a new file. In other words, I am unable to use AE to transfer my Address Book file to my external HD, unless I change the name of the file. What is going on here?

Hello Bob.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

BOBJ is unable to delete file from OFRS

System Info:
Business Objects Enterprise XI3.1 SP3 FP3.2
Windows 2003 Server Enterprise Edition SP3
Oracle 10.2
Java 1.6.0_20
APACHE Tomcat 5.5.20
2 clustered servers
FRS located on SAN Disk Drive connected to primary server (Winchester1)
We use WebIntelligence exclusivly.
We are receiving the following error in our event log on our clustered server:
Source: BusinessObjects_CMS
Category: General
Type: Warning
Event ID: 33018
Computer: Winchester2
Unable to delete file from the file repository. Make sure a File Repository Server is running and registered and enabled. Details : Failed to connect to the File Repository Server output. Make sure the server is up and running.
We have verified the FRS is running and we are able to connect to it from our clustered server (Winchester2). The security settings are set to full control for the admin group and the users have Read/Write access to the file store folders. The errors are filling up our event logs and causing issues with the servers. this appears to be happening each morning and the file it is trying to delete is an .xls file.
We have a ticket open with SAP Support but they are just as baffled as we are and keep sending us from one group to another and tell us they need to look at it on thier end and they will get back to us.
Has anyone had this happen on their system?

Hi Richard, did you ever get this issue resolved? We are having a similar issue on XI R3 SP4 using NAS/CIFS shares for our File Stores. We see this issue mainly after our servers are patched and a full environment restart is initiated. Like you, our event logs fill up with so many error messages I cannot pinpoint exactly when the issue starts happening.
Any help would be much appreciated.

I am unable to delete zombie bookmarks (no link) in Normal or Safe Mode Firefox 3.6.13 Mac 10.4.11, bookmarks disappear at random

Similar Messages

Maybe you are looking for