I am unable to double click on anything on my MacBook pro, any suggestions?

1. Try slower double click speed.
    System Preference > Universal Access > Mouse & Trackpad
    Click the "Trackpad options" button.
    Set Double Click Speed at a slower speed.
2. Take the MBP to the Apple store to have the battery and the trackpad checked.
Best.

Similar Messages

Double Click ...folder does not open, any suggestions please

Hello,
A new problem surfaced today on Macbook Pro (Leopard) after I allowed the system software updater to run. Of course this could be pure coincidence as I did not notice the problem until working for half a day.
When I double click on a folder on the desktop it does not open.
So I Ctrl-click the folder and select "open." No problem, the folder opens.
Now when I double click on a folder within this folder it opens just fine. So the problem is confined to the desktop.
I log out and back in and the problem goes away, but comes back after I have been working for a while.
I disabled Spaces but it did not help.
Any suggestions would be most welcome.
Thanks.

I would say that this topic IS solved, unless the original poster was unable to use the solution (change the trackpad settings) successfully. I, for one, was able to, and boy am I grateful! This has happened across machines and operating systems for me, for years now, and finally I have a solution! Thank you for the helpful post(s) that helped me get my mac back on track!

Unable to double click after using at line-selection

hi all...
unable to double click after using at line-selection. But if i comment set pf-status, i can double click on the line but on first double click everytime i just get last record i.e. 200th and after second double click i'm not getting output. what is the problem? plz reply...
REPORT YP2 line-count 10(2).
tables: lfa1, LFB1.
data: itab like lfa1 occurs 0 with header line,
JTAB LIKE LFB1 OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS: vendor_n for lfa1-lifnr.
*SET PF-STATUS 'MENU'.
INITIALIZATION.
vendor_n-low = '1'.
vendor_n-high = '200'.
vendor_n-option = 'BT'.
APPEND vendor_n.
clear vendor_n.
At selection-screen.
IF VENDOR_N-LOW < 1.
MESSAGE w000(sabapdocu).
clear vendor_n.
ELSEIF vendor_n-HIGH > 200.
MESSAGE S001(sabapdocu).
ENDIF.
START-OF-SELECTION.
SELECT * FROM lfa1 INTO TABLE ITAB WHERE lifnr IN vendor_n.
WRITE:5 SY-ULINE(72).
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
top-of-page.
WRITE:/5 SY-ULINE(72).
WRITE: /5 SY-VLINE, 'Vendor_code', 20 SY-VLINE, 28 'Name' ,58 SY-VLINE, 60 'Phone', 76 SY-VLINE.
WRITE:/5 SY-ULINE(72).
end-of-page.
WRITE:5 SY-ULINE(72).
WRITE:/ 'THE PAGE NO IS',SY-PAGNO.
WRITE:/5 SY-ULINE(72).
END-OF-SELECTION.
WRITE: /5 sy-uline(72),/ 'THE RECORD IS CLOSED'.
AT LINE-SELECTION.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
WRITE:/5 SY-VLINE,6 'Vendor No.',17 SY-VLINE,18 'Company code',28 SY-VLINE, 29 'Created by',39 SY-VLINE.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ENDIF.
AT PF7.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ENDIF.
AT USER-COMMAND.
IF SY-UCOMM = '0001'.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.

Hi,
copy and paste the code given below it works....
START-OF-SELECTION.
SELECT * FROM lfa1 INTO TABLE ITAB WHERE lifnr IN vendor_n.
WRITE:5 SY-ULINE(72).
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
hide : itab-lifnr.
ENDLOOP.
clear itab.
top-of-page.
WRITE:/5 SY-ULINE(72).
WRITE: /5 SY-VLINE, 'Vendor_code', 20 SY-VLINE, 28 'Name' ,58 SY-VLINE, 60 'Phone', 76 SY-VLINE.
WRITE:/5 SY-ULINE(72).
end-of-page.
WRITE:5 SY-ULINE(72).
WRITE:/ 'THE PAGE NO IS',SY-PAGNO.
WRITE:/5 SY-ULINE(72).
END-OF-SELECTION.
WRITE: /5 sy-uline(72),/ 'THE RECORD IS CLOSED'.
AT LINE-SELECTION.
IF itab-lifnr is not initial.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
HIDE ITAB-LIFNR.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
WRITE:/5 SY-VLINE,6 'Vendor No.',17 SY-VLINE,18 'Company code',28 SY-VLINE, 29 'Created by',39 SY-VLINE.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.
AT PF7.
IF itab-lifnr is not initial.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
HIDE ITAB-LIFNR.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.
AT USER-COMMAND.
IF SY-UCOMM = '0001' and itab-lifnr is not initial.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
HIDE ITAB-LIFNR.
ENDLOOP.
clear ITAB.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.
Regards,
Siddarth

HT5192 After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

I just updated--my Camera is a disaster. Yes, I know how to turn (and position) the Camera now. However, every photo I take is UPSIDE DOWN in the Camera Roll OR Photo Stream. Even worse, a number of my Apps (Weather Underground, for example) are ALSO now upside down. Has anyone here experienced these serious orientation problems after this update? I've read the 'Manual' and its as if it doesn't exist. However, if I leave the Apple site, customer complaints about orientation abound...
This is my first time posting here about an issue (well, the same issue - I posted last week about the Camera, and no one responded). Any advice at all about how to get this corrected is much appreciated!
Thank you!
Lisa

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

Unable to load Flash 9 on my Intel MacBook Pro

Unable to load Flash 9 on my Intel MacBook Pro but can on my
Intel iMac. I spoke with a Tech from the Mac Store service area and
was told that there in a thread on this issue but I can't find it.
The basic issue is that I am able to load Adobe Flash Player
9 on my Intel iMac but not on my Intel MacBook Pro and I'm unable
to determain why. I tryed uninstalling and reinstalling three times
and found no difference.
If someone could help me I'd be thankful.
Dave

I bought the $29 version of Snow Leopard (not the kosher way of doing things, i know.
If you read the license agreement, there's actually no difference between what's allowed with the $29 copy and the $169 boxed set. The only difference is that the boxed set also includes iLife and iWork. There is also, despite what some will have you believe, nothing in the license agreement that requires Leopard to be pre-installed except in the case of the $10 disk purchased as part of the Up-to-Date program (for folks who bought a machine shortly before SL was released). So, you're not being bitten by some technical requirement for Leopard to be present.
I get a flashing folder with a question mark. My disk drive makes some crazy noises as well, and it seems to start running fast, then slowing down. I think it may have caused a minor scratch on the disk as well.
Sounds like it's possible the drive could be failing, though that's impossible to say for sure remotely. One man's crazy noises are another man's normal state of operations. Do other DVDs work in your drive?
I'll also need to do an "Archive & Install" since there are tons of important files on this machine.
*DO NOT* attempt to install a system update on this machine unless you have good backups! If something goes wrong, you're screwed if you didn't have a backup. Hopefully, you have not reached that point already... I'm unclear on whether your machine is no longer able to boot, or if it's only having trouble when you try to boot from the SL disk.
If your machine is still functional, your first priority before doing *+anything else+* should be to make at least two backups. See my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups> for assistance with this.
If your machine can't boot anymore, let us know and we'll offer some troubleshooting tips. And don't try to do anything else with it until you've consulted with some expert, whether here or at an Apple Store or somewhere else.

After the recent update, my documents moved from Finder to Word. When I moved the folders to Finder, I am unable to attach a file to an e-mail. Any Suggestions?

After the recent update, my documents moved from Finder to Word. When I moved the folders to Finder, I am unable to attach a file to an e-mail. Any Suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Unable to pair plantronics backbeat go 2 to macbook pro. Any solution pls?

Unable to pair plantronics backbeat go 2 to macbook pro. Any solution pls? thanks!

HI!
I just synced my earbuds to my macbook pro. Try:
1) Setting
2) Bluetooth Settings (Clicked "on" and "discoverable"). I also selected for the bluetooth setting to show Bluetooth in menu bar.
Under settings go to "Sound" and "output". My earbuds are in there twice but one does not work and the other has a "stereo" option. That does work.
Now, iTunes automatically starts and I can hear my music on my earbuds. I think itunes will override whatever you are trying to listen to. The earbuds also worked with my online lectures for school. So far the earbuds do not work for YouTube.
Hope it helps.... good luck!

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

I haven't done anything with my macbook pro but it is running in MS-Dos environment. In what kind of situation this can happen.

Hi, has anyone have the problem that you haven't done anything with you macbook pro but its operating system is running in dos environment?

Do you have Windows installed?
No? Then it can't be running in DOS. (Disk Operating System)
Mac's run BSD Unix, not DOS. however single user mode looks like DOS.
If you booted the Mac holding the command and s keys, that's single user mode, which is the root level command line.
type exit or reboot or restart (one of those should work) and press enter, then reboot normally or load OS X.
If it's always entering this enviroment, then something is set on it to do that.
It's possible to set the machine to display this mode upon boot, but once OS X is loaded it should disappear.

I am unable to insert a DVD/CD on my MacBook Pro

I Am unable to insert a DVD/CD into my MacBook Pro. How do I overcome this?

Are you certain that there is nothing inside such as a mini DVD? Does the DVD drive appear dead? You may have to have it examined at an Apple store genius bar.
Ciao.

Every time I click on Safari nothing happens (macbook pro). Could it possibly be open in a hidden window? I have force quit, tried to reopen, tried to open in finder...nothing is working for me. Thanks, A

Every time I click on Safari nothing happens (macbook pro). Could it possibly be open in a hidden window? I have force quit, tried to reopen, tried to open in finder...nothing is working for me. Thanks, A

Hi vaqban,
If you are having an issue with Safari not launching you may want to troubleshoot using the steps in the following article -
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/HT1199
Thanks for using Apple Support Communities.
Best,
Brett L

Suddenly I can't find the volume bar on iPod nor YouTube apps. Also I can't hear anything from both apps. Any suggestions? I have an iphone 3gs

Suddenly I can't find the volume bar on iPod nor YouTube apps. Also I can't hear anything from both apps. Any suggestions? I have an iphone 3gs

Have you taken the steps recommended in the User Guide--restart, reset, restore from backup, restore as new?
What happened after taking each of those steps?

Downloaded my iTunes library to a new computer. Trying to sync my new iPad to the new computer. get err msg "unable to load data class info from sync services". Any suggestions?

I donwloaded my iTunes library to a new computer. Trying to sync my new iPad to the new computer. I get an error message "iTunes unable to load data class inormation from sync services." Any suggestions from anyone? Thank you.

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced.

My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced. Is it internal battery for both, new logic board required, bad hard drive, or bad RAM?
Help.

Run an Apple Hardware Test using the original installation disk that has the AHT instructions on it.
Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
It is possible that you may need a new PRAM battery.
Ciao.

I am unable to double click on anything on my MacBook pro, any suggestions?

Similar Messages

Maybe you are looking for