I am unable to edit my form

Why can't I edit the form previously created in forms central?

Was this an HTML form or did you convert it to PDF? Were you the original author or was the Form shared with you? Can you share a link to the form so we can have a look at what might be causing the problem?
Andrew

Similar Messages

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

Unable to edit the form in Personal Change Request

Hi,
One of the manager is trying to edit the employees information. When he navigates to edit form of personal change request, under My Crew tab of Manager Self Service in portal, unable to edit the information but he is able to add notes. in the form.
In detail, the manager is trying to assign new manager to an employee under him(moving an employee to differen team headed by different manager so trying to replace his name in the employee's informaton). The manage is unable to change the information or unable to edit any information in the form "request for change in position/transfer"
Could someone help me on this.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 17, 2010 9:15 PM

Hi,
The issue is resolved. This is because of Acrobat JavaScript option disabled in display preferences of the form.
Once this checkbox is enabled its working fine.
Regards,
Ravi.

Unable to edit Data Forms in EPM 11.1.2.1

Hello Gurus,
I have recently exported the form from EPM 11.1.1.3 and have imported it to EPM 11.1.2.1 successfully without any issues.
I then checked the Data forms to see if the forms load properly and I have observed that it is not using the Alias dimensions for the Page/Point of view dimensions.
Now when I try to edit the form I get the following error/message. I am not sure as to how I can edit the form.
You cannot edit an ad hoc grid from this context. If you have an Ad hoc grid creator role, open it, and use Save.I am not getting as to how I can edit this form so that I can select the option to use Alias in the data form settings
Thanks
HyperEPM.

Hi HyperEPM,
To solve your problem, try to follow these steps:
1. Create a report into the EPM 11.1.2.1 platform. Then export it.
2. Open a report exported from EPM 11.1.1.3 platform and copy all the "query" tag (<query>...</query>).
3. Select all the "query" tag from the report you've exported from the EPM 11.1.2.1 platform and paste the tag that you've copied in the previous step.
4. Import the updated file.
Regards,
David Mendele.
BI / EPM Project manager at Business & Decision
Lima, Perú

I am unable to edit a form created with LiveCycle version 8.5 with LiveCycle Version ES1.

I am trying to edit a form created with LiveCycle version 8.08.2073 (installed with Adobe Pro 8). I am using LiveCycle version ES (installed with Adobe Pro 9). I can open the fhe form, but the tools are greyed out. It apears the file is locked for editing, but I cannot determine where/how to unlock it.

You should try to start in safe mode which runs a file check. You hold the shift key down during a start up till there is a progress bar towards thr bottom of the screen. This start will take a longer time than normal. In safe mode try the functioins you are having problems with to see if there is an improvement. Some links below to read.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

Unable to edit New form if fields/Columns are more than 60 or 65

Hi SP Gurus,
I am facing very unusual problem which is I am not able to eidit NewForm if fields/Columns are more are more than 60 or 65.<o:p></o:p>
https://support.office.com/en-au/article/Create-a-custom-list-form-using-SharePoint-Designer-917d8fdb-ee00-4441-adb3-a94612d1d105<o:p></o:p>
By following above link I have added TestNewForm.aspx and trying to edit but I getting very stupid and unclear error message like this<o:p></o:p>
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer.
If the problem persists, contact your Web server administrator.

Hi,
Per my understanding, the NewForm.aspx is not editable when there are more than 60 or 65 columns in the list.
Is there any warning or error message when editing the NewForm.aspx page in SharePoint 2010(screenshot would be better)?
I tried creating a list contains more than 60 columns, then edit the corresponding NewForm.aspx in SharePoint Designer 2010, it works as expected.
I suggest you create another list and make the test again to see if it is an issue of this list.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to edit the fields in PDF interactive form

Hi,
We are in the process of developing an interactive form integrating Web Dynpro ABAP with Adobe forms.
As of now we are able to send the data to Adobe form from Web Dynpro.
But we are facing the following problem.
i) Unable to edit the form data for entering/changing the contents of the fields in PDF document, which is presented to user with a Web Dynpro application URL.
We have already unset the 'ReadOnly' property of the interactive UI element.
We are currently working on ZCI installation with SAP SP08, GUI patch level 20, Adobe Reader version 8.0
Please advise...
Thanks,
Satya.

Hi,
Check your ADS settings, I feel it's due to lack of some config in ADS only.
Regards
<i><b>Raja Sekhar</b></i>

User In Planning unit Hierarchy unable to see data form in editable mode

hi all,
we are facing a problem in planning unit hierarchy in Hyperion planning, where we have 4 users, Hierarchy is define as
hierarchy: budget approved
version: approved
Entity: Finance
Senario:Budget
haroon asghar ( owner)
adeel javid (Reviewer)
Naeem asghar (Reviewer)
Imtiaz (Reviewer)
Issue is that,after start the budget activity (promotional path) by Admin, the data form editable to Owner haroon asghar
but after completing his work by haroon,when he promote the planning unit ,the next user in Hierarchy "Adeel javid" unable to see data form in respective planning unit in uneditable data form not only for this user but all rest of the users as well,while i think data form should only uneditable(grayed) for user Haroon Asghar who promote the planning unit.
we have checked all security rights to the users those are "Write access" but still Adeel javid is unable to enter data,so the budget activity is stop due to this problem.
when i remove the planning unit then i log in with all user one by one and see all data form required version,scenario and entity were editable to all users mention above
we want to run budget activity with the above planning unit hierarchy.
plz any one provide the proposed solution of the said issue
we are using Product Version 11.1.2.0.00
Regards
Anwar

Reviewers will not be able to write data to the intersection. Reviewers can only review the data and follow-up with a Reject, Promote, Sign off, Delegate, Originate or Freeze.
Please refer Article ID 1226783.1 in MOS.
HTH-
Jasmine.

Unable to edit

I am a complete novice to Dreamweaver so please bear with me.
I am trying to edit some pages (.php files) for my employer. I was
able to edit the index.php file but none of the others. All of the
html code is greyed out except certain areas and unfortunately, the
part I need to change is greyed out. I am completely unable to edit
any of the greyed areas. I've looked all over to see if there's a
way to unlock the code but I can't see anything. Does anyone have
any suggestions?

If you do not have the associated Template file, it *MAY* be
a trivial
matter to recreate it. We would need to see the code on the
page to know
whether that's possible, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:gecgtk$4g2$[email protected]..
> This sounds as though the page has been made form a
Dreamweaver template.
> Do you have a template folder in the site root folder at
all with a file
> named .dwt in it?
>
> You can unlock the greyed out area of a page by opening
it and
> going>Modify>Templates>Detach Template.
WARNING! WARNING! Doing this may
> help you in the short term but once detached if anyone
updates the
> original .dwt template file the changes WILL NOT
propagate to those pages
> that have been detached from the template.
>
> First look for the .dwt file. It should be in the site
root folder in a
> folder named Templates. Open it if you can find it and
make the changes
> there. All changes made, once saved, will propagate to
all pages in the
> site made from the template.
>
>
>
> gwnyvere wrote:
>> I am a complete novice to Dreamweaver so please bear
with me. I am
>> trying to edit some pages (.php files) for my
employer. I was able to
>> edit the index.php file but none of the others. All
of the html code is
>> greyed out except certain areas and unfortunately,
the part I need to
>> change is greyed out. I am completely unable to edit
any of the greyed
>> areas. I've looked all over to see if there's a way
to unlock the code
>> but I can't see anything. Does anyone have any
suggestions?
>>

Unable to Edit Price Lists in Advanced Pricing Vision Instance

Hello I have a new Vision Instance for 12.1.3 and when I switch responsibility to Oracle Pricing Manager Vision Operations I am unable to edit and of the price lists or modifiers that are in the system by default. any suggestions on what I need to update as I have not run into this before in previous Vision instances

this was the solution to this issue
Solution
1. Be sure to set the following profile option values at user level
a. QP: Pricing Transaction Entity = ORDFUL and save.
b. QP: Source System Code to 'Oracle Pricing' (if not already) and save.
2. Responsibility: Order Management Super User (or equivalent)
3. Navigation: Pricing > Price Lists > Price List Setup
4. Open the price list: XYZ CHARGES
5. The form will now open without error, and changes will be accepted

Unable to edit the document in sharepoint2010

Hi,
I am unable to edit the document in sharepoint2010 with IE-10 while editing i am getting the error like
"The form cannot be displayed in the browser because the use of session cookies has been disabled in the current browser settings.In order to load the form the session cookies must be allowed."
Please suggest me on this.
Thanks in advance.
Regards
SidduSekhar

Hi SidduSekhar,
Based on your description, I need to verify the things below:
Which browser did you use? Did this issue occur with all the browsers?
Is the cookie disabled in the browser? If yes, please enable it.
Did you implement security fix in the web.config, such as <httpCookies requireSSL="true" httpOnlyCookies="true" />? If yes, please set it to false in web.config.
Did you configure Alternate Access Mapping for SharePoint with a URL containing a “_” character? If yes, please remove the “_” from the URL.
More references:
http://blogit.create.pt/miguelisidoro/2013/12/01/sharepoint-and-the-form-cannot-be-displayed-in-the-browser-because-the-use-of-session-cookies-error/
https://prasantabarik.wordpress.com/2014/05/03/sharepoint-2010-workflow-task-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Edit Formscentral form with Adobe Acrobat 9 PRO

Since Formscentral is being discontinued, I would like to be able to edit my forms with Acrobat 9 Pro. I have saved my forms from Formcentral as a PDF, opened them with Acrobat, saved a copy to remove the security, then opened it with the Forms wizard. Once I get to this point I am unable to edit the text of the form. What am I doing wrong or is there a better way to achieve this?

I would also like to know.
It seems we all have to recreate the forms again in indesign since indesign cant read a pdf form. Is this really true. Shame on Adobe if it is.
Please let us know.
We are PAYING CUSTOMERS. Dont shaft us and leave us in the dark Adobe !!!

Unable to edit Cells in Hyperion Planning:

Hi,
Users are unable to edit cell values in particular webform.Even with Administartor access also unable to edit.
After Selecting Particular combination in that form am unable to select another combinations.When i used serch option in the menu.The Planning system is loging out.Please help on these Issue.

Thanks for all replies. Now, i am able to edit the cell on single click.

Unable to view PDF forms

I use adobe live cycle to create forms for use in our company, these forms must be editable by our mobile employees by way of free text field and drop down boxes. The form work fine on a PC running Adobe Reader X but I am unable to edit them when using Adobe reader X on my playbook. Does anyone else have this issue or can anyone else offer a solution.

Hi ,
I had searched the forum and i am aware of the solutions provided there. But that did not work for me. I found some SAP notes which say Vista is suported with NW04S SP 12 onwards. My issue is our server is running on SP11. I would have to migrate the forms to ZCI layout for it to work.
Regards
Prakash

What would cause a single user not to be able to edit the fields in a form? All other users are able to edit the form.

I have a user who is unable to edit his time sheet in Adobe Reader XI. It worked fine in Adobe Reader 9.6. I recently upgraded his reader to version XI and he lost the ability to edit the fields. I re-imaged his machine and re-did his profile. He was able to edit his time sheet. A week later he's back to where he was. He was able to go to another machine with Adobe XI and edit his time sheet but he can't do it on his normal workstation. His time sheet shows the purple bar at the top telling him to fill out the form and that he can save data typed into the form. We're running XP SP3. How can I troubleshoot this?

My guess would be keyboard related. I'm guessing the field you're trying to fill has a keystroke event allowing only certain types of character. If the keyboard is faulty OR if the keyboard's layout (English, french, numLock, capLock) have been changed, allowed character could be someplace else.
I would first verify the presence of a particular format or a keystroke event in the format tab. I would then test my layout by typing charaters in another application such as notepad. Any chance the maximum character allowed would have mistaken be set to 0?
Also, I see you mentionned:
He was able to go to another machine with Adobe XI and edit his time sheet but he can't do it on his normal workstation
By Adobe, I'm guessing you mean Reader. Is it possible the default application on this other machine is Acrobat instead? If it is the case, the problem would probably be the way the file was created and maybe it would require to enable Extended features.......

I am unable to edit my form

Similar Messages

Maybe you are looking for