I am unable to enter data in a Google sheet via iPad.
I am unable to enter data in a Google sheet on my iPad.
The admin on the sheet says it's open to anyone with the link.
I can enter from my iMac but not from my iPad (current ios.)
What am I doing wrong?
It had occurred to me that the old shutdown/restart routine can cure a multitude of problems. That's what I did and it took care of all of the problems in all my Numbers documents.
Similar Messages
-
Why am i unable to enter data into an aarp crossword puzzle?
the crossword cell is ready to accept a character but a letter I enter does not show up in the cell
Apple performs all service on iPhones.
-
User In Planning unit Hierarchy unable to see data form in editable mode
hi all,
we are facing a problem in planning unit hierarchy in Hyperion planning, where we have 4 users, Hierarchy is define as
hierarchy: budget approved
version: approved
Entity: Finance
Senario:Budget
haroon asghar ( owner)
adeel javid (Reviewer)
Naeem asghar (Reviewer)
Imtiaz (Reviewer)
Issue is that,after start the budget activity (promotional path) by Admin, the data form editable to Owner haroon asghar
but after completing his work by haroon,when he promote the planning unit ,the next user in Hierarchy "Adeel javid" unable to see data form in respective planning unit in uneditable data form not only for this user but all rest of the users as well,while i think data form should only uneditable(grayed) for user Haroon Asghar who promote the planning unit.
we have checked all security rights to the users those are "Write access" but still Adeel javid is unable to enter data,so the budget activity is stop due to this problem.
when i remove the planning unit then i log in with all user one by one and see all data form required version,scenario and entity were editable to all users mention above
we want to run budget activity with the above planning unit hierarchy.
plz any one provide the proposed solution of the said issue
we are using Product Version 11.1.2.0.00
Regards
AnwarReviewers will not be able to write data to the intersection. Reviewers can only review the data and follow-up with a Reject, Promote, Sign off, Delegate, Originate or Freeze.
Please refer Article ID 1226783.1 in MOS.
HTH-
Jasmine. -
Unable to write data into excel file when it's close
Hi,
I'm facing this problem and it's a bit weird. I'm using the following method to insert data into excel file. But when excel file is close, it unable to write data into the excel sheet. But it was able to write the data into the excel sheet if i open the excel file when running the program.
Can anyone please tell me what's wrong to the code?
public int updateLog(String sheet, String no, String cpId, String CatId, String rbtCode, String rbt, String rbtName, String artistName, String price, String rbtFileName, String songId, String msg){
int result = -1;
try{
SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss",Locale.ENGLISH);
String actionDate = formatter.format(new Date());
rbtName = rbtName.replaceAll("'", "''");
artistName = artistName.replaceAll("'", "");
String sql = "insert into [Sheet3$] (Code, CpID, CategoryID, RBTCode, RBT, RBTName, ArtistName, Price, RBTFileName, SongID, UploadStatus, FileUploadedDateTime) ";
sql = sql + " values ('" + no + "', '" + cpId + "', '" + CatId + "', '" + rbtCode + "', '" + rbt + "', '" + rbtName + "', '" + artistName + "', '" + price + "', '" + rbtFileName + "', '" + songId + "', '" + msg + "', '" + actionDate + "')";
System.out.println(sql);
log.writeLog(sql);
result = stmnt.executeUpdate(sql);
} catch(Exception e){
e.printStackTrace();
log.printStackTrace(e);
return result;
public int openConnection(){
int result = -1;
try{
Class.forName(dbDriver);
c = DriverManager.getConnection(conStr + excelFilePath+";ReadOnly=0;");
stmnt = c.createStatement();
} catch(Exception e){
e.printStackTrace();
log.printStackTrace(e);
return -1;
return 1;
}ThanksHI,
i hv a doubt regarding reading / opening of a
password protected Excel file using jxl( java ) .
How to read / open a password protected Excel file
thro Java (jxl ) program .plz let me know some
example also .
Regards,
Ramesh P
845935822cross posting !! answered here
http://forum.java.sun.com/thread.jspa?threadID=710466&messageID=9507085#9507085 -
Unable to capture data from drop down list in custom added field in migo tcode at item level
Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = '<SCREEN INPUT FIELD NAME>'
values = values[]
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
<inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected -
Unable to change Date Created in Metadata
Please help with my first post...
Unable to change Date Created field in Metadata.
I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
Next I have to Import this into Aperture where the Date Created shows as "20090926".
Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
Thanks in anticipation.Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
or
3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
nathan -
Cell data not getting refreshed in which user enters data OO ALV(editable)
Hi Friends,
I am using OO ALV for editable grid display.
I am unable to change grid data in the cell in which user enters something, using OO ALV. Did through debugging of my own program and found that some problem with system program. Then I did all system debugging. Could not find out why is the grid not getting refreshed with the new data in the cell in which user had entered some value. Rest of the cell's data are getting refreshed with the values which i am updating in the final internal table. I can see that the data in the final internal table is changed for the cell in which user enters data. But even after the call of
CALL METHOD obj_alvgrid1->refresh_table_display
does not refreshes the data in the cell in which user had entered data. Rest of the cells data are getting refreshed.
Piece of code:
SET HANDLER obj_event_receiver->handle_data_changed
FOR obj_alvgrid1.
METHODS: handle_data_changed
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed
e_onf4
e_onf4_before
e_onf4_after.
METHOD handle_data_changed.
DATA : v_valid TYPE char1,
v_refresh TYPE char1.
*--check mt_good_cells semantically
CALL METHOD perform_semantic_checks( er_data_changed ).
*--If PBO is again visited, just refresh the ALV grid.
CALL METHOD obj_alvgrid1->refresh_table_display
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDMETHOD.
METHOD perform_semantic_checks.
LOOP AT er_data_changed->mt_good_cells INTO w_good.
v_index = sy-tabix.
CASE w_good-fieldname.
WHEN 'ZASCAS'.
*Now here based on some conditions I am changing my final internal table i_zamtsmatnp
MODIFY i_zamtsmatnp FROM w_zamtsmatnp INDEX
w_good-row_id TRANSPORTING
zascas modif.
User enters data in zascas field. Based on the data entered, I am changing other fields which is getting refreshed. I am also changing zascas in the program even after user had already entered the value which was bit wrong and i am correcting it in the program on the even "data_changed" even.
Please help me friends as i m strugling past hours wondering why the data is not getting refreshed for the cell in which user enter data.
Regards,
SuryaHi Surya,
The approach you are following is correct. You need to use the comibnation of all these things:
Event - DATA_CHANGED
Methods - CHECK_CHANGED_DATA
- GET_CHANGED_DATA.
However, here are few standard programs which are having similar functionality.
BCALV_EDIT_03
BCALV_EDIT_07
Check out these once.
Note: If anything is helpful, dont forget to reward points
Thanks,
Adithya K
SAP Practise
[email protected] -
Unable to enter MOSS 2007 License Key after SP2 upgrade - trial period about to expire
We are unable to enter the license key as stated in the title. The field does not allow any input. Central Admin shows that our trial period is about to expire very soon.
Our environment is MOSS 2007 (Office Sharepoint Server with Enterprise Client Access License) on Server 2003. SP2 is installed, the August 2011 CU (KB2553020) is installed, and the Microsoft suggested fix for this known problem is also installed (KB971620).
ie. Product expiration date is activated incorrectly. Since those fixes do not work, we are left with the manual entry of the license key. However, that also does not work.
Still, it shows that the trial period is about to expire. Apparently this fix is also included in any of the CU's after June 2009.
We have a valid license key for the Enterprise version and have the Enterprise client licenses as well. The License Synchronizer Job has succeeded.
I have searched the forum and have not seen a answer that resolves this issue.
Does anyone know what to try next ? We are running out of time.
Thanks in advance,
Peter
<></>
<> </>
Hi,
As far as I know, this issue occurs because the installation of the 2007 Microsoft Office SP2 activates the production expiration data incorrectly.
To resolve this issue, please install one of the following updates according to the following links:
Update for 2007 Microsoft Office servers (KB971620), 32-Bit Edition
Download the Update for 2007 Microsoft Office servers (KB971620), 32-Bit Edition package now. (http://download.microsoft.com/download/2/F/5/2F51AB71-1325-49D2-9CB9-18DEC4780E99/office2007-kb971620-fullfile-x86-glb.exe)
Update for 2007 Microsoft Office servers (KB971620), 64-Bit Edition
Download the Update for 2007 Microsoft Office servers (KB971620), 64-Bit Edition package now. (http://download.microsoft.com/download/5/B/B/5BBD34A9-C528-42B0-8A5F-9A8997B25C32/office2007-kb971620-fullfile-x64-glb.exe)
For more information about this issue, see
http://support.microsoft.com/kb/971620
After you install one of these updates, you do not have to redeploy the service pack. For information about how to deploy this update, please see the Microsoft TechNet article on how to deploy server updates:
http://technet.microsoft.com/en-us/library/cc263467.aspx
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Rock Wang TechNet Community Support -
Unable to enter the amount in schedules
Hello Experts
I am Unable to enter the amount in schedule in package when opened via package manager.All seems to be greyed out and edit is not possible.
Appreciate prompt response.
ThanksThere are many reasons that could explain why you can not input an amount in a schedule cell.
You should check the followings items :
- category builder (account families, flow behaviors, dimensional analyses). Also make sure it is ditributed.
- schedule design (initialization of dimensions and grouping method, cell formulas, read only cell option)
- data entry restrictions associated to the current reporting
- user rights
- package lock/protection
Regards. -
Unable to enter Recon.account during vendor creation
Hi Friends,
During vendor creation:
In accounting information accounting i'm unable to enter Recon.acct (160000). Why is that and what will be the effect??
AnilThe reconciliation account (LFB1-AKONT) field is controlled via trans OBD3 (account group) / trans OB23 (field status group) customizing. It appears that the field status customizing must be display. Please perform the following steps:
1) Run trans OB23.
2) Double click on Change Vendor (Accounting) -> Company code data-> Account management.
3) Change reconciliation account to change. Click on Save.
4) Run trans FK02 using desired vendor / company code. Click on Accounting info. Press Enter. Reconciliation account field should be available to enter, i.e., change mode. -
Unable to enter Agent name and port details while doing installation on Solaris, Installation wizard is moving slowly and at 'Specify Agent Details' page it is not allowing me to enter the details and now I am not able to continue installation.
Please let me know if I am missing anything and there is any solution.just in case cross verify the certiication matrix for 11.1.1.6
http://www.oracle.com/technetwork/middleware/data-integrator/odi-11gr1certmatrix-163773.xls
Thanks,
Saichand -
HT1212 unable to enter passcode due to cracked screen
unable to enter passcode due to cracked screen. anything i can do without losing all my media i.e photos, videos & music
You may be able to backup the iPod
If you previous synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.
After you place the iPod in Recovery Mode and restore the iPod you may be able to get some info off the restored iPod via
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official -
Unable to fetch data using control-blocks
Hi,
I have created two non base table text items(from_date, to_date) and if values are not entered from front end i.e. null then hadrcoded in pre_query trigger to default values as from_date (system date-present month-last year) and to_date(system date-present month-present year).when i have pressed the fetch button without giving values to from_date and to_date,it is retrieving data in default period,which i ahave hardcoded in PRE_QUERY trigger.But even i enter values dynamically from front end and when ever i press fetch button ,it is retrieving data in default period instead giving data in specified duration what i have entered dynamically from front end. i.e. it is not accepting values what i have entered.
any one please help me.
oracle forms 10g version:10.1.2.0.2
Thanks and Regards
Ramhi,
Thanks for ur feedback.
here query is executed. My problem is,unable to fetch data in specified period,what i have entered dynamically.Even i entered dynamically,it is fetching data in default period(Which i have hardcoded in PRE_QUERY).
below code is ,what i have hardcoded in PRE_QUERY
:GLOBAL.DFROMDT := NULL;
:GLOBAL.DTODT := NULL;
IF :HEADER_BLOCK.NBTFROMDT is NULL THEN
SELECT TO_DATE('10'||'/'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MM')||'/'||
TO_CHAR(ADD_MONTHS(SYSDATE,-12),'YYYY'),'DD/MM/YYYY')
INTO :HEADER_BLOCK.NBTFROMDT FROM SYS.DUAL ;
END IF;
IF :HEADER_BLOCK.NBTTODT IS NULL THEN
SELECT SYSDATE INTO :HEADER_BLOCK.NBTTODT
FROM SYS.DUAL;
END IF;
IF :HEADER_BLOCK.NBTFROMDT IS NOT NULL
OR :HEADER_BLOCK.NBTTODT IS NOT NULL THEN
:GLOBAL.DFROMDT := :HEADER_BLOCK.NBTFROMDT;
:GLOBAL.DTODT := :HEADER_BLOCK.NBTTODT;
END IF;
IF :DETAIL_BLOCK.nbtFjdDrCrInd IS NOT NULL THEN
svWhere_String := 'WHERE FJH_VCHR_DT BETWEEN '''||nvl(:GLOBAL.DFROMDT,TO_DATE(:GLOBAL.DFROMDT,'DD/MM/YYYY'))||''' AND '||
''''||NVL(:GLOBAL.DTODT,TO_DATE(SYSDATE,'DD/MM/YYYY'))||''')';
Set_Block_Property('DETAIL_BLOCK',DEFAULT_WHERE,svWhere_String);
ELSE
Set_Block_Property('DETAIL_BLOCK',DEFAULT_WHERE,' ');
END IF; -
Cannot enter Date & Time via Settings
After migrating to 2.1 when i try to enter date and time option via settings, i land up again on the main screen. Can anyone help me on this
I have the same problem. When I travel abroad, I leave the phone in Airplane Mode; I can't get into the Date & Time settings to adjust the time. The phone properly updates while in the US, but abroad, it occasionally takes several hours to update to the correct time.
This weekend, as the Netherlands switched off of DST, the phone plainly refused to update the time. I was unable to enter into the Date & Time page and was left with a clock that was just wrong.
When I returned to the US this evening, the phone updated to the proper time once again. It would be quite nice to be able to adjust the time manually when the phone refuses to update properly. -
Unable to enter a Division for which I have proper credentials, via the GUI
I have a Division which I am unable to enter, either as a student or as the full site Administrator, from the GUI.
When I log into the main Site page, I see the link for the Division (as I should - I have DOWNLOAD permissions for the Division). However when I click the link (the thumbnail image) I am always, 100% of the time, rejected and sent to the login page. Ignoring that, I still have all of my proper credentials and may continue to freely access other parts of the site.
In the past, I had this exact behavior on (1) a Division "RobotCourses:PSYC" (Psychology), and (2) my main site breadcrumb, which appears at the top of the site page to the right of the "iTunes U" breadcrumb and says "Maiko Covington @ University of Illinois..." For reasons completely unknown to me, this behavior resolved itself yesterday, clicking both of those objects works as expected, although NO one at our site with any edit access did anything on the server.
However, the same behavior has now reappeared, this time on a Division "RobotCourses:CLCV" (Classical Civilizations). Again, I have not done any editing of that Division, nor had anyone logged into it (these Divisions are in a test area where I am developing automation tools).
I am, quite frankly, stumped. But I've done some investigation.
SETUP:
The Division has identity "RobotCourses:CLCV".
This Division contains a single Course with identity "RobotCourses:CLCV:CLCV115:CLCV115All-13564".
Both the Division and the Course are restricted to properly registered academic students. I have developed automation code in a login portal which grants credentials for RobotCourses:CLCV to students registered for courses in the CLCV department (Classical Civilizations) and credentials for RobotCourses:CLCV:CLCV115:CLCV115All-13564 to students registered for CLCV 115 (Classical Civilizations 115 - Mythology of Greece and Rome) specifically.
The Permissions set on RobotCourses:CLCV in particular are:
<Permission>
<Credential>Authenticated@urn:mace:itunesu.com:sites:illinois.edu</Credential>
<Access>No Access</Access>
</Permission>
<Permission>
<Credential>gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV</C redential>
<Access>Download</Access>
</Permission>
The point is to deny access to Authenticated@ (merely authenticated students) and then specifically grant it for people given a "gakusei" credential for RobotCourses:CLCV in particular.
(Note here that "gakusei" is a Japanese word meaning "student," I am using it in my credentials to ensure that my credentials and permissions are not affected by other credentials named "student" set at upper levels and used by some live users of the site, as we do not have a segregated development environment. It is our lowest level of access beyond mere Authenticated@..., designed to give students access to download and "surf to" Divisions and Courses.)
*LOGIN: ISSUING CREDENTIALS:*
The login portal code works successfully, and so when a student "Jane Doe" logs in, she is in fact given appropriate credentials (as she is actually registered for CLCV 115 here at UIUC). From the code generating her login URL, I see:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
(You can see she is also registered for STAT 100).
With the default login URL thus generated, she is taken to the top level of the Site in iTunes, and in fact sees thumbnail links for both STAT (Statistics) and CLCV (Classical Civilizations). Clicking on STAT takes her to the STAT Division where she can then enter the Course STAT 100 with no problems.
*PROBLEM: CAN'T GET TO CLCV FROM THE MAIN PAGE IN THE GUI*
HOWEVER! Clicking on CLCV brings up the login page. If she ignores the login page, she can still access the rest of the site, including STAT, just fine. Logging in again (reissuing her credentials) does not help the situation.
Note that this is not a problem only for Jane Doe, the same thing happens for anyone in CLCV and in fact happens for me as Administrator of the whole site with full access, even.
*ACCESS DIRECTLY TO THE DIVISION BY URL WORKS*
With a slight modification to the login to allow access directly to the RobotCourses:CLCV Division (by adding the handle of the Division to the end of the location), credentials are issued exactly as before:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
and she is taken to the Division page, SUCCESSFULLY. So, it seems she actually HAS access, as expected.
*ACCESS CONFIRMED WITH DEBUGGING:*
Writing some code to generate not the actual login URL but rather a link that takes me to an "iTunes U Access Debugging" page for the Division (figured this out by reading some other posts! :)) I am taken to a page with the following:
(at generated URL https://deimos.apple.com/WebObjects/Core.woa/Browse/illinois.edu.1945806043/xxx5 64?credentials=....)
Received
Destination illinois.edu.1945806043
Identity "Jane X Doe" <[email protected]> (jxdoe) [xxxxxxxxx]
Credentials gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
Time 1236877947
Signature 42ccef92a3298684a7a09eed45adb6b788a700c01645b8b423d33ace120650b0
Analysis
The destination string is valid and the corresponding destination item was found.
The identity string is valid and provides the following information:
Display Name Jane X Doe
Email Address [email protected]
Username jxdoe
User Identifier xxxxxxxxx
The credential string is valid and contains the following 4 recognized credentials:
1. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
2. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
3. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
4. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
The time string is valid and corresponds to 2009-03-12 17:12:27Z.
The signature string is valid.
Access
Because the received signature and time were valid, the received identity and credentials were accepted by iTunes U.
In addition, the following 2 credentials were automatically added by iTunes U:
1. All@urn:mace:itunesu.com:sites:illinois.edu
2. Authenticated@urn:mace:itunesu.com:sites:illinois.edu
With these credentials, you have browsing and downloading access to the requested destination.
(In case you think to check the sums, be aware I've actually changed the student's name for this example.)
So, as expected, I have access, in fact the student DOES have access, visiting the Division page directly (specifiying its handle as part of the desired location).
*IT'S ONLY CLICKING THE THUMBNAIL ON THE MAIN PAGE THAT BREAKS*
Because the problem is only apparent when clicking the icon for the Division on the main Site page, I have no way (that I know of) to get any information about precisely WHAT is going on, what possibly differs in the GUI-click situation from the "generate me a URL that takes me right there" situation.
At that point I'm fully in the GUI, I'm not sending anything via web services, so I have no idea how I can proceed to debug this from here.
I'm also quite confused at the sudden appearance of this behavior, and the disappearance of this behavior from RobotCourses:PYSC, another Division that was broken in this same way all last week but which magically resumed allowing me access yesterday.
Any suggestions, hints, or advice would be very welcome. Has anyone else even seen behavior similar to this?
Thanks for any information you might have.Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.
Maybe you are looking for
-
I have a HP PSC all-in-one 1315 that I want to install on my new netbook running on Windows XP. As the netbook has no DVD drive I downloaded the full feature software and driver pack. When I double clicked it the files were extracted but the install
-
Hi, all. "shared pool free memory" from v$sgastat include "SHARED_POOL_RESERVED_SIZE" ?? For example, select * from v$sgastat where pool ='shared pool' and name like 'free memory' assuming that the result of the above query is about 100Megabytes and
-
LSMW datamigration material master with multiple distribution channels
Hi, We plan on using the LSMW to migrate our customer's material master to a ECC 6.0 system. Currently we use the BMM00 and BMMH1 structures, but there I can specify only one distribution channel. Does anyone know how to include multiple distribution
-
Clicking on a doc file link uses a path to a corrupted Open Office executable
In a response to my original question, the Tools/Options/Applications window was suggested for handling content type. However, for me, no content types or actions are shown, so I cannot specify a path to the valid version of Open Office.
-
Flash10e.ocx version 10.0.45.2 or 10.0.42.34?
First I had used the flash uninstal tool from adobe and successfully removed the older version of flash player I thought I downloaded flash player 10 version 10.0.45.2, but when I go into my browser IE7 and look at the manage add ons, I see Shockwave