I am unable to establish a VPN connection. My certificates are installed, but I receive error : ssl_error_bad_mac_read

After installing SSL Certificates into the browser, I attempt to load the site and receive the following error: ssl_error_bad_mac_read

greg85740 wrote:
I just bought a new IBook Pro to replace an old unit.
I assume you mean a new MacBook Pro correct? From Apple, a brand new machine, not a recently bought older model Mac?
I loaded Microsoft 2008 office.
Some reports of issues "fresh installing" Office 2008 on a Lion (OS X 10.7) equipped Mac (all new ones have this)
http://roaringapps.com/app:2533
I am getting an error
“Unable to establish a secure connection to pop-sbc.mail.am0.yahoodns.net because the correct root certificate is not established”
Could be a issue with yahoo, or your ISP, or your new machine.
I would try again later and see if the issue clears itself up. Make sure your computer is updated via Software Update, this should give you the updated root system certificates.
Also head over to Keycahin Access>Preferences then Certificates and set Best Attempt, Best Attempt and Require Both for the three settings. This will make sure your certificates are well checked before using.
If your using a older machine, like 10.5, then there are no longer any root certificate updates from Apple.
I have all the same settings as my old Mac which worked fine but the new computer is giving me this error.
So it works fine on the older machine and not the newer.
Well it could be that becaue you installed Office 2008 (same license) on another machine that there are security issues at play to prevent a cloned machine from intercepting emails.

Similar Messages

Why can't I establish a VPN connection using my iPhone 4's personal hotspot?

Hello everybody,
I want to access our company's network with my Mac Book Pro using my iPhone 4's 3G connection, but unfortunately it simply won't work. Here is what I can do:
- I can establish a VPN connection from my MacBook Pro using my home (or some other) WiFi and access the company network.
- I can establish a VPN connection on my iPhone 4 using 3G and access the company network on my iPhone 4.
- I can use my iPhone 4's personal hotspot (sharing its 3G connection) with my MacBook Pro and surf the Web.
what I can't do is:
- establish a VPN connection on my MacBook Pro when connected to the internet via the iPhone's personal hotspot. (connection times out)
- access the company's network on my MacBook Pro using the personal hotspot, when the iPhone's VPN connection is ON.
The VPN is an encrypted PPTP connection, with username and password.
Is this a known issue, and, if so, is there any way to solve this?
Thanks in advance!
Cheers
Diego

what i forgot:
i'm connecting to the iPhone's hotspot using WiFi
and:
the answer provided here did not do the trick for me :/
https://discussions.apple.com/message/17729456#17729456

I can no longer access facebook from my macair and when i try the following error message appears "unable to establish a secure connection to the server.

I have had no issue accessing Facebook in the past using my MacAir. Last night each time I would try and access the page, an error message would appear, saying that unable to establish a secure connection to the server "www.facebook.com"". The problem continues this morning. I have not updated any software or made any changes. One minute it was working, the next it was not. I do not have any parental controls; I have deleted the cookies; and I have reset safari. I can access all other websites that I have tried. I am using Version 6.0.4.

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Now open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, restart your internet modem and router. Then quit and relaunch Safari and try Facebook.

Cannot establish a VPN connection in Lion

I have followed the instructions in this support article but cannot create a VPN connection:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/9010.html
I've tried the steps outlined in this article, and successfully completed everything but still cannot create a VPN connection:
http://anders.com/guides/native-cisco-vpn-on-mac-os-x/
I have all the correct credentials for my VPN network (vpn address, group name, shared secret). I always receive a server time out error.
I am able to successfully connect to my work VPN using the Cisco VPNClient. But unfortunately it only runs in 32-bit mode. I prefer to boot in 64-bit mode and would prefer not to reboot everytime I want to establish a VPN connection.
I have been working on this issues for three days straight and am getting nowhere. My work is an unsupported IT environment, and the IT support subscription service we use will not handle any Mac issues.

Hmm, no changes. Still the same issue. I deleted the files described, rebooted and reconfigured the network.
hmm, Finder still remembers his old server connection settings, maybe i should delete those, too. Any idea where finder stores his server connections?
In my perception the message that no secure connection can be established comes up immediately after sending the connect command. I don't think that there is network traffic, there is no noticeable latency...

Why am I getting an error "Unable to establish a secure connection with (mail server)"? And what can I do?

I'm trying to set up email on my Firefox OS Flame (OS is Boot2Gecko 2.0.0.0-prerelease) and getting an error:
Unable to establish a secure connection with mail.velociraptor.info
I'm on Dreamhost, the certificate belongs to `*.dreamhost.com` but I'm not even sure this is a certificate error, and if it is, how I'd go about fixing it. I found the Certificate Manger, but I don't know how to download the certificate and add it, and I don't know if this is even the problem.

If this is a self-signed certificate or one where the CA is not trusted on FFOS, you will get this error.
There is currently no proper user interface for adding certificates. You could have a look at the method described at this page: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/
There are also several bugs open regarding this problem, e.g. https://bugzilla.mozilla.org/show_bug.cgi?id=874346. They have additional information that could help you to find out, if this is the problem you are seeing.

VPN connect via menu extra fails, but works via prefpane - anybody else?

Is anybody out there with the same symptom, getting an error message when trying to establish a VPN connection via VPN menu extra but being able to connect properly via networking prefpane? Would be interesting to know if this could be a bug worth sending a report to Apple...
PB G4, Mac OS X 10.5.5

Tim, you made it. Another example for that famous tricky problems after OS migration. I had the VPN prefs already on Mac OS X 10.4 and trusted them on Mac OS X 10.5 after their automatic
adoption too...
Thx mate!

I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help

TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.

Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock

Trying to install inDesign. Receiving error message: Unable to extract Temp Directory (EX11)

Trying to install inDesign. Receiving error message: Unable to extract Temp Directory (EX11)

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

OS X 10.6.1 Entourage (Unable to establish a secure connection to server)

I have Windows 2003 domain running Exchange, I have setup all my Apple clients n 10.6.1 on the domain using Directory Utility. Then I have installed Entourage 12.2.1. Once the account is setup and checks email it gives you that great error
"Unable to eatablish a secure connection to server-net.wan because the correct root vertificate is not installed"
Well silly me, I guess installing the root certificate that I created on the Server 2003 box and then installing the certificate with the OS X root account into the system keychain, the login keychain, and the MicrsoftIntermediateCertificates keychain was not enough. So after banging my head on this one and checking every where I figured it was time to post on Apple. So if someone has some great fix I will bow down to you and kiss your feet
Thanks,
Joey T.

Hello, since nobody else has replied...
You'll need to download a Certificate from someone, not sure who exzctly, or maybe self sign one? Some onfo on that here...
http://www.frontiernet.net/~beakmyn/vpn%20howto/Complete%20Home%20VPN%20Howto%20 Guide.html#mozTocId435619
http://forums.pcpitstop.com/index.php?/topic/198421-cant-login-to-frontiermyyaho o-mail/

Mac Pro refuses to establish a vpn connection

Hello out there...
I have a 6 month old Mac Pro. Unfortunately this computer refuses to establish a reliable vpn connection to my office. All the other gear I have (powerBook, iPad and iPhone) does it.
The Mac Pro is erratic. Sometimes he connects but then all of a sudden after two or three minutes the vpn connection is beeing closed. The other day it works for hours....
He did so before the system upgrade and does it now after the upgrade to 10.6.8
I am realy desperate to get a solution for that....
All the best
Peter

Hi Kris,
The ASA supports different kinds of VPN, i.e. SSL (aka SVC for Ssl Vpn Client), IPsec or L2TP/IPsec.
For IPsec it suports both IKEv1 and IKEv2 (as of version 8.4).
On the client side,
the legacy Cisco VPN client uses IPsec with IKEv1.
Anyconnect 2.x uses SSL.
Anyconnect 3.x can use either SSL or IPsec/IKEv2.
So the Cisco clients do not use L2TP, but L2TP functionality is built-in in some OS's, like Windows and Android.
Personally I have not had the opportunity yet to lay my hands on an Android device to try this out, so I hope Michael or the people in the other thread can help you out if you need more details.
As to what's different, that's a short question with a long answer
One important difference between SSL and IPsec is that at some places IPsec may not work because the network provider blocks UDP500, while SSL uses TCP443 which is usually not blocked because it's the standard port for HTTPS.
Another one is that for Anyconnect, you need a license on the ASA (it does include a free license for 2 concurrent users).
Just a few pointers:
And probably Wikipedia is a good place to start reading as well if you want the full picture
hth
Herbert

LIBWSC_CAT:1055: ERROR: Unable to establish WSH & WSL connection

Hello Tuxedo Experts,
My tpinit call to the Tuxedo server is failing. ULOG content is pasted below:
===========================================
153100.DevnonAOMapp!?proc.8585396.1.0: 06-22-2011: Tuxedo Version 11.1.1.2.0, 32-bit
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1064: ERROR: Unable to establish WSH connection 0x0002a8e10afea683
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
===========================================
Would you please guide how to resolve this issue.
Thanks & Regards,
Ahsan

Hi Todd,
Please find below the WSL entry of the ubbconfig file:
=================================
*GROUPS
GROUP1
LMID=serverNo1 GRPNO=1 OPENINFO=NONE
GROUPsys
LMID=serverNo1 GRPNO=2 OPENINFO=NONE
DMADMGRP LMID=serverNo1 GRPNO=4
GROUPROLE LMID=serverNo1 GRPNO=9 OPENINFO=NONE
GROUPQUERY LMID=serverNo1 GRPNO=10 OPENINFO=NONE
GROUPCCS LMID=serverNo1 GRPNO=12 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
getserial SRVGRP=GROUP1 SRVID=1 MIN=1 MAX=1
cashsrv SRVGRP=GROUP1 SRVID=10 RESTART=Y MIN=40 MAX=40 MAXGEN=6
# RQADDR="cashsrv1" REPLYQ=Y
dosql SRVGRP=GROUP1 SRVID=300 MIN=5 MAX=10 RESTART = Y MAXGEN=5
rolesrv SRVGRP=GROUPROLE SRVID=10 RESTART=Y MIN=3 MAX=3 MAXGEN=6
querysrv SRVGRP=GROUPQUERY SRVID=1 RESTART=Y MIN=10 MAX=10 MAXGEN=6
WSL SRVGRP=GROUPsys SRVID=1
CLOPT="-A -- -n//10.126.212.124:7015 -m40 -M40 -x15 -c 1024"
=================================
I just noticed in the ubbconfig snippet above that WSL refers to GROUPsys group and SRVID 1, but Server with SRVID = 1 is not in GROUPsys, it is in GROUP1. Anyhow, that probably doesn't even matter. does it?
I have updated the WSNADDR variable accordingly:
=================================
$ echo $WSNADDR
//10.126.212.124:7015
=================================
But I am still getting the same error in client side ULOG:
=================================
180523.DevnonAOMapp!?proc.8257760.1.0: 06-23-2011: Tuxedo Version 11.1.1.2.0, 32-bit
180523.DevnonAOMapp!?proc.8257760.1.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
180523.DevnonAOMapp!?proc.8257760.1.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
180523.DevnonAOMapp!?proc.8257760.1.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
=================================
Would you please guide what could be the issue.
Thanks & Regards,
Ahsan Asghar
Edited by: Ahsan Asghar on 23-Jun-2011 12:17

"Safari is unable to establish a secure connection"

When I try to log in to bank or credit card accounts Safari will frequently display the above error. It resolves when I restart my computer, but only temporarily. Sometimes the error displays after I'm already logged in to an account and trying to make transfers/payments/etc.
Has anyone else had this problem and/or found a solution?

Hello B Noir,
Thank you for your suggestion. I did check the date, time and time zone and they are correct. I also was able to open the iTunes Store without any trouble. I actually had trouble getting back to this page, because I was getting the error message trying to open it, and had to reboot to reply to you. I realize that I didn't give any detail except to say it sounded like exactly the same problem that timiteo was having.
I installed updates to Safari 5.05, and OS security updates to 10.5.8 two days ago. Since then, Safari keeps getting hung up and/or giving me this error message:
"Safari can’t open the page.
Safari can’t open the page “https://intuit.com/login/” because Safari can’t establish a secure connection to the server “intuit.com”."
This happens on numerous websites and does not happen consistently. In other words, I just received the error message when I tried to open my gmail calendar from within gmail. Other times, it has opened without trouble, and after rebooting, I am now able to open it again (this is adding up to a lot of rebooting today).
I then installed Google Chrome (so I could get some work done), but after a short time, it started doing the same thing with this error message:
"SSL connection error
Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have.
Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error."
Once I get the message, then I can't do anything with the particular browser until I reboot, which solves the problem for a short while. Actually, once I see the message in one browser, it is sure to happen in the other browser right away as well. I had none of these problems before I installed the updates, so I'm wondering if there is some conflict in the 10.5.8 OS security updates, since it doesn't seem limited to Safari.
I'm not running any virus software on the Mac. I do have Parallels running a virtual Windows machine on the same laptop and I have Norton Antivirus running on Windows, but I don't even have Windows started up. I used to have Norton Antivirus running on the Mac "side" - but I uninstalled that months ago, because it was bogging everything down.
I appreciate any ideas you may have.
Susan

Unable to establish a secure connection

I have a Time Capsule that we use as a wireless router. After my ISP changed out my cable modem, I now have faster Internet service, but none of my devices (Macbooks, iPads, iPhones) can access SOME secure sites. All other activity works fine. These sites ARE available using my mobile provider, so I know it isn't the sites. I have used both Safari and Firefox with the same result. The error message in Safari is that it "cannot establish a secure connection." No settings were changed with the Time Capsule -- only a new modem was connected. I have rebooted and run diagnostics to no avail.
Any suggestions?

The problem has been solved. It was a defective modem -- not the router!

Unable to establish an SMTP connection

The exact message I get is:
Sorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm not going to try again; this message has been in the queue too long.
This is only happening on emails to a certain domain. A few months ago I was sending emails there with no problems. I am using Mail Version 6.3 (1503) on OS X Version 10.8.3. This happened both before and after I updated from 10.8.2 to 10.8.3. Unless there were other version changes of either Mail or OS X, I no of no changes in the system from the time of the sucessful sends to the problem sends.
The only other outgoing mail rejections I've had is one where I had an incorrect address for the recepient. Of course the error message was different on that situation.
What would cause the failure to establish an SMTP connection?
If you need more info, ask and I'll try to supply it.

Thanks, I wanted to know what else you needed to help me.
I have an account through my webpage (deedon.us). It is a plesk server. All of my emails go out through the same account, obviously with the same settings. Only emails sent to this one domain (craigslist) kick back with the message. My ISP is Frontier but I am not using the email address provided though them.
My server name (incoming and outgoing) is mail.deedon.us. This is a POP account (at least the incoming is).
In the advanced section of "Edit SMTP Server List" I have "Use default ports (25, 465, 587)" marked.
I also have "Use Secure Sockets Layer (SSL)" checked.
The Authentication option is "Password."
What part of the configuration would I change and would it affect the outgoing emails that are not problematic?
Thanks

Unable to establish network endpoint connectivity from an executable using localhost - error: -314350

Hi,
We have two executables, one a sender and another a receiver. The receiver initiates a connection using the IP address of the sender's computer. They use the network endpoint connectivity mechanism to establish connection and transfer data. Everything (connectivity establishment, data transfer etc) works when the sender and receiver run on separate computers. If they run on the same computer the connection cannot be established and we get error message -314350 from 'Create Network Stream Reader Endpoint' VI on the receiver side. We tried using the IP address explicitly as well using localhost as the IP address. None of the options work.
Now if we run the sender and receiver VIs from within the Labview environment, on the same computer, everything works fine. Everythng works whether we explicitly use the IP address of the computer or just use localhost.
If one of the two runs as an executable and other runs in the environment, we get the same error message (-314350)
Does anybody know what seems to be the problem ?

In case anybody else runs into this problem, you might want to check out the Endpoint URLs section in the following tutorial. To elaborate further on the issue, when creating an endpoint, you must supply a unique endpoint name that doesn't already exist in the system or an error will be generated. This is fairly straight forward when dealing with a single application instance on a given machine. However, if you have multiple application instances running on the same machine, things become more challenging. If you have two applications App1 and App2 that both contain a reader endpoint named MyReader, we need to ensure the data received from the network is properly routed to each application. To facilitate this, each endpoint is registered in a named context, and only one application can create endpoints in that named context. If a second application tries to create an endpoint in a named context already being used by another application on that machine, you'll receive error -314350. This is analagous to how applications on the same machine can't use the same port number when using TCP/IP to communicate. If you don't explicitly specify a context when naming the endpoint, we'll attempt to create the endpoint in the default context (which is equivalent to the empty string). This means things will work fine when running both VIs from the development environment since both VIs are in the same application instance. However, if you create a built app for each VI and run both applications on the same machine, you'll receive error -314350 unless you've gone to the effort to make sure your endpoint names are unique across contexts. The same thing would happen if you ran one VI in the 2010 dev environment and the second in the 2011 dev environment on the same machine. I hope this helps clarify things.

I am unable to establish a VPN connection. My certificates are installed, but I receive error : ssl_error_bad_mac_read

Similar Messages

Maybe you are looking for