I am unable to fill in info on a fillable PDF
I am unable to fill in info on a fillable PDF form. Do i need to down load anything???
If you're viewing that file with the Preview application that comes with OS X, I've found that it's not perfect at being able to read PDF files. You might try the free Adobe Reader. Once you install that it will take over viewing of PDF files in Safari. If you don't want that, open Adobe Reader's preferences and change that option in the "Internet" category.
Similar Messages
-
Can't see info typed into fillable pdf: See Below
I created pdf forms using adobe forms central.
) I have the pdf I created using FormsCentral on my desktop
) I do a file save as pdf, so I can change the name of the document while still saving my blank original pdf document.
) I write into my fillable saved as pdf doc and then email it to a coworker. The file size at this point is around 67 KB
) This coworker opens up file and does a save as so they can rename it and save it to their desktop.
) This coworker than adds information to the document by tying into the fillable pdf doc.
) They email the document back to me
) When I receive the document it is now 1 MB, Also I can only see what I wrote into the doc before I emailed it to her. However if I print the document everything she typed in shows up on the printed document. Or If I click in each field that you can type in the words or numbers she typed in show up but only in the field I’m clicking my mouse in
) My question is would you say this is a user issue or an issue with the form itself, perhaps a bug.Hey George, I emailed you the pdf docs. One using Windows Reader and One using Adobe Reader. It does appear that the fillable pdf docs do not work very well with windows reader. Windows Reader makes the file size much bigger and doesn't let people who don't use windows view info put into the file unless you print the doc or click in each space to view whats written. It does appear that the drop down menus and check boxes work in both adobe reader and windows reader.
Thanks,
kak09 -
Can i fill in and save downloaded fillable pdf files???
Does anyone know if I can fill in and save pdf forms that were downloaded from the internet without owning Adobe Acrobat 7.0???
I used to have Acrobat 5.0 on my Windows based system - however on the MAC system I have not installed the Acrobat software (did not get the MAC version yet)
Preview allows me to open it but can not enter values into the fields!!!!
Any help appreciated...............
PowerBookG4 Mac OS X (10.4.7)Thank you both of you for the ideas - just tried it yes I filled in part of the form in Preview then saved it as post script - then the program tries to convert it back to PDF and displays it in Preview - but the second time Preview did not let me continue to fill in the form. Since the forms need to be filled in partially first and then later either readjusted or additional info provided - this system will not work without too much hassle.
I am waiting now for Adobe to get back to me to see if they will allow me to purchase the upgrade package - although my previous version was for Windows. -
One computer unable to fill in information
We have a PDF that we use. For some reason, the supervisor is unable to fill-in any information on the pdf. The purple bar is at the top. When the rest of us open the pdf, we can fill in the information fine. The fill-in information isn't highlighted on their computer when they click the icon to do so. Any ideas as to why this would happen?
What is the Reader version on the user's machine?
Are you filling the form in a browser or standalone?
Try to fill the form using Adobe Acrobat, if available. Or read extend the form again using Acrobat. -
Unicode Export - unable to retrieve nametab info for logic table BSEG
Hi
We are performing a unicode export (CUUC from 4.6C upgrade to ECC 6.0) and we have incurred this error.
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
Our OS is HPUX11.31 & Database is 10.2.0.2
myCluster (63.21.Exp): 1610: inconsistent settings for table position validity detected.
myCluster (63.21.Exp): 1611: nametab says table positions are valid.
myCluster (63.21.Exp): 1614: alternate nametab says table positions are not valid.
myCluster (63.21.Exp): 1617: for field 310 of nametab displacement is 1877, yet dbtabpos shows 1885.
myCluster (63.21.Exp): 1621: character length is 1 (in) resp. 2 (out).
myCluster (63.21.Exp): 1257: unable to retrieve nametab info for logic table BSEG .
myCluster (63.21.Exp): 8358: unable to acquire nametab info for logic table BSEG .
myCluster (63.21.Exp): 2949: failed to convert cluster data of cluster item.
myCluster: RFBLG *400**AT10**0000100000**2004*
myCluster (63.21.Exp): 322: error during conversion of cluster item.
myCluster (63.21.Exp): 323: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/SBX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SBX/SYS/exe/run/R3load: END OF LOG: 20081102104452
We checked the note 913783 as per the CUUC guide but the correction only for package SAPKB70004 to 6. but we are in package SAPKB70011.
We had found two notes:
1. Note 1238351 - Hom./Het.System Copy SAP NW 7.0 incl. Enhancement Package 1
:Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to thisline.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is(re-)started.
search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines. "
I tried the above solution by editing the file DDL*.TPL but it is skipping the table and marks it as completed but its not the good solution as we will be miss the data from the table RFBLG.
2. Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion:
Solution
Activate the table.
Then call the RADCUCNT report. Do not change the selected parameters, but ensure that 'Overwrite Entries' is selected. Set the 'Unicode Length' to 2 and fill the last two fields 'Type' and 'Name' with TABL and TACOPAB respectively. Then select 'No Log' or specify a log name.
Execute the RADCUCNT report and restart the export.
We have not tried this solution, bcos SAP is still down and CDCLS job is still running.
We would like to know whether you have faced any issues like the above one and what is your suggested approach and solution.
Is it safe to start SAP now (when the CDCLS job runs) and then try to activate the table RFBLG?
Regards
Senthil
Edited by: J. Senthil Murugan on Nov 3, 2008 1:41 AM
Edited by: J. Senthil Murugan on Nov 3, 2008 3:36 AMHi Senthil,
If you have done your pre-conversion steps before upgrade and after upgrade successfully then you should not see the below errors. However changes to SPDD tables may some times also have some impact during conversion and throws nametab errors occurs. Program RADCUCNT runs in the end of upgrade to update nametab tables if any new changes happned during upgrade.
You can do any no of exports to complete jobs successfully.yeah When export running you shouldnt bring SAP up.
The tables you have mentioned all are cluster tables and CDCLS being the biggest table it will take hrs to complete depending on your size of the database.
Do not pay around with the .TSK file until if you are sure you want to re-execute it.Your first possiblility is skipped because there may be multiple same .TSK files present locally(where u r running distribution.monitor (or) sapinst ) and on the common directory. You may also look at the .TSK.bkp files because it get information and creates a new .TSK. This is not complicated but tricky.
secound possibility is to update the changed tables(eg: RFBLG...) to conversion tables.Follow the Note but make sure no R3load processes are running before you start SAP. If you dont want to wait long and sure to restart other processes which are running you can kill it and start SAP. Specify your error tables only and follow instructions given in the note.Once done bring down SAP app. and restart the export process using ur sapinst or distribution monitor.
Regards,
Vamshi. -
Unable to retrieve nametab info for logic table BSEG
Hi
We are performing a unicode export (CUUC from 4.6C upgrade to ECC 6.0) and we have incurred this error.
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
Our OS is HPUX11.31 & Database is 10.2.0.2
myCluster (63.21.Exp): 1610: inconsistent settings for table position validity detected.
myCluster (63.21.Exp): 1611: nametab says table positions are valid.
myCluster (63.21.Exp): 1614: alternate nametab says table positions are not valid.
myCluster (63.21.Exp): 1617: for field 310 of nametab displacement is 1877, yet dbtabpos shows 1885.
myCluster (63.21.Exp): 1621: character length is 1 (in) resp. 2 (out).
myCluster (63.21.Exp): 1257: unable to retrieve nametab info for logic table BSEG .
myCluster (63.21.Exp): 8358: unable to acquire nametab info for logic table BSEG .
myCluster (63.21.Exp): 2949: failed to convert cluster data of cluster item.
myCluster: RFBLG *400**AT10**0000100000**2004*
myCluster (63.21.Exp): 322: error during conversion of cluster item.
myCluster (63.21.Exp): 323: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/SBX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SBX/SYS/exe/run/R3load: END OF LOG: 20081102104452
We checked the note 913783 as per the CUUC guide but the correction only for package SAPKB70004 to 6. but we are in package SAPKB70011.
We had found two notes:
1. Note 1238351 - Hom./Het.System Copy SAP NW 7.0 incl. Enhancement Package 1
:Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to thisline.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is(re-)started.
search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines. "
I tried the above solution by editing the file DDL*.TPL but it is skipping the table and marks it as completed but its not the good solution as we will be miss the data from the table RFBLG.
2. Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion:
Solution
Activate the table.
Then call the RADCUCNT report. Do not change the selected parameters, but ensure that 'Overwrite Entries' is selected. Set the 'Unicode Length' to 2 and fill the last two fields 'Type' and 'Name' with TABL and TACOPAB respectively. Then select 'No Log' or specify a log name.
Execute the RADCUCNT report and restart the export.
We have not tried this solution, bcos SAP is still down and CDCLS job is still running.
We would like to know whether you have faced any issues like the above one and what is your suggested approach and solution.
Is it safe to start SAP now (when the CDCLS job runs) and then try to activate the table RFBLG?
Regards
Senthil
Edited by: J. Senthil Murugan on Nov 3, 2008 1:40 AM
Edited by: J. Senthil Murugan on Nov 3, 2008 3:37 AMDear Senthil
I had faced this issue earlier.
Table BSEG Requires activity in the ACT phase, like activation etc.
If we do the ACT phase using the transports and not perform manual activation of this table, this issue arrives.
Please share the relevant information--- seems some steps are missed out or not carried properly in the CU&UC phase.
Otherways, we had applied the solution Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion and it worked well..
But you need to be sure, that this table was changed(activated etc) during the Upgrade till export phase.
Issue is Nametab info is created during the Upgrade phase in CU&UC and if this table is touched, that nametab info is not getting it right as the runtime object is changed.
With RADCUCNT the nametab info will be created again.
All the Best
Best Regards
Deepak Dhawan -
Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, AzHi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az -
Unable to retrieve nametab info for logic table BSEG during Database Export
Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "BIA20071101021156
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "BIA20071101021156
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
SunilHello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael -
I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing! Help!
Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
tt2 -
Hi I have trouble returning a completed PDF form to sender - it looses my filled in info - how do I solve this?
Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem. -
Unable to fill out interactive form fields in the pdf form.
I'm unable to fill out interactive form fields in the pdf tax form in Reader 11.0.06 with purple bar inviting to do so.
The only Flash Player that is remotely connected to Adobe Reader is the plugin.
Can you temporarily uninstall the plugin (or both ActiveX and plugin using http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html and see if the problem disappears?
Reinstall both using these installers http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_text_4 -
Unable to fill out forms in my PDF document. Please help!!!!
Hello,
I have been unable to fill out the form to my password protected pdf document on either my mobile phone or my Nook HD+. I read the "Getting Started with Adobe Reader" which states I would be able to do this. What am I not doing that will allow me to do this. I have been able to open the document on my laptop just not the other two (mobile phone, Nook HD+) I really need to be able to access this document.
Thanks for all the assistance in advance.Hi,
The current Mobile Reader cannot modify password protected forms. This is a popular request, and is something that may be incorporated into a future release.
The Mobile Reader supports editing of non protected interactive forms in the AcroForm format that were authored by Adobe Acrobat Pro.
Thanks,
Adobe Reader Team -
Unable to load console info in SUNMC 4.0
hi all
Unable to load console info in SUNMC 4.0 in alarm it is giving error info ie.Agent on host (.....),1161 port not responding.
plz try to solve the problem
Regards
spandhanDear Kumar,
Please, you delete the statement by program RFEBKA96, however before run this program look the documentation.
Regards,
Paulo -
i recieved a housing application as an email, i am able to view and download the document but am unable to fill it out
If you can't fill it in in Preview, try downloading Adobe Reader and fill it in that way.
Also, it may not be electronically fillable. You may have to print it and fill it out by hand. -
How do I auto fill "file info" in photoshop cc ?
How do I auto fill "file info" in photoshop cc ?
If it's repeating information such as your contact and copyright information, you may wish to create a Template.
Auto-complete is available in Photoshop CC, which is a time saver. This feature has been left out of CC 2014.
How can I set in ps the "file info" autofill option?
Creating Metadata Templates | Photometadata.org
Maybe you are looking for
-
How to set up loopback# as source fro NTP and/or built-in DNS server ?
I have created a loopback# interface which I would like to be used as the router source interface for the NTP client and/or built-in DNS server so everything originating whithin the router has only one and unique IP address (such as: logging source-i
-
Iphone died and wont start up/detect in itunes
Hey there! Over the weekend, my iphone 4's battery died. just before that, it showed a notification that is hould connect it to the computer to update its software. While the power was working then, i couldnt slide to unlock the phone. When i got hom
-
My trackpad was not working correctly and now when i use a mouse it wont work eather.
I have a Mac Book Pro 13" and for months now my track pad was acting up. When i was watching youtube it would randomly pause and zoom in and other things like that. I am going away and me and my sister have to share it and because her computer is fin
-
Is it possible to listen to streaming audio from a website on the Palm Pixi? I tried to listen to live audio from a radio station website and it wouldn't play. Do I need to download a player?
-
I got a macbook pro i want to wath it on my hdtv
my macbook don't display anything on my hd tv