I am unable to get a proper report if i schedule a performance report in SCOM 2007R2

Hi,
A very Good day to All.
I have created a Performance report in SCOM 200R2 to trace performance reports for specific counters. I also receive the report VIA email, But the problem is i get the same report all the time. I need the report on hourly basis but with the value of that
particular specific times.
Example:
=========
When i schedule a report for data needed for CPU utilisation from a group of servers from  1/1/2014 9AM - 10AM i get the report for that and in every 1 hr (As per the time what is set in SCOM). I get the same report every hour for 1/1/2014 9AM
- 10AM only i want an email to triger for every one Hour with its current value.
Eg: 1/1/2014 10AM - 11AM,  11AM - 12PM's CPU Report etc. 
Can any one plz help me on this.

there is  no option to doing this.
Roger

Similar Messages

  • Not able to get proper report from PBAQ Tr. Code

    Hi HR experts!!
                               I was trying to get the report of technical skilled resumes which is already stored in the SAP System, but I am not getting the proper report if I change the status of the position  to other than "in-process" . Could any one help me out.
    Thanks and regards,
    Sunil

    when you query for failed instance make sure you retrieev SI_STATUSINFO,you should then be able to retrieve the actual message using getErrorMessage(). Check this thread:
    Scheduled Job Error Message

  • Unable to get the java system reports

    Hi all
    In portal we are unable to get java system reports
    Thanks in advance

    It seems that your WAS installation is not fully configured and / or can you check the domain name in the IGS url? Please follow these links.
    Re: Graphics Rendering Problem
    Re: Error connection IGS
    Regards,
    Nitin

  • Unable to get the selection value of OAMessageChoiceBean

    Hi,
    From our 11i to R12 upgrade, in Customer Advance Search page, we are unable to get the proper handle for OAMessageChoiceBean (in extendedCO).
    The code snippet for handling the bean is as follows:
    OAMessageChoiceBean PartyStatusFilter = (OAMessageChoiceBean)vOAPageContext.getRootWebBean().findChildRecursive("xxfeF426PartySearchStatus");
    String xxTest= PartyStatusFilter.getSelectionValue(vOAPageContext);
    The value for above xxTest (in R12 env.) is coming as null. Whereas, the same code is working in 11i enviroment and the output of xxTest="A".
    Hence, we are unable to get the selection value of the messagechoicebean in our R12 environment. Moreover, I've already looked into similar previous posts of this forum, also tried using getSelectionText(vOAPageContext) or getSelectedValue(), but it didn’t worked too.
    Any pointers please?
    Many Thanks,
    Zahid

    Hi Keerthi,
    I'm still unable to get the value using your provided code. The referenced snippet I used is as follows:
    String messageChoiceValue = null;
    vOAPageContext.writeDiagnostics(s, "Before the IF LOOP", 2);
    if(vOAPageContext.getParameter("xxfeF426PartySearchStatus")!= null ) {
    vOAPageContext.writeDiagnostics(s, "Inside the IF LOOP ", 2);
    messageChoiceValue = vOAPageContext.getParameter("MessageChoiceID");
    vOAPageContext.writeDiagnostics(s, "Value of MessageChoice... "+messageChoiceValue, 2);
    if( messageChoiceValue != null ) {
    l++;
    saveFilterRow(SSLineVO, HeaderId, new oracle.jbo.domain.Number(l), "C", "Status", messageChoiceValue);
    vOAPageContext.writeDiagnostics(s, "After the IF LOOP", 2);
    The resultant output is as follows:
    "Before the IF LOOP", "After the IF LOOP"
    It doesn't goes inside the IF condition as the valuie is null. Any other alternative?
    Regards,
    Zahid

  • Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.

    Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.

    Hi hanmant,
    You could find GL Line item report under General ledger WOC => Reports => List=> G/L Line Item Report, but this report does not have filter parameter "Approved by".
    May I know what was the use case behind "Approved by" field?
    BR, Rakesh

  • XL Reporter error"'Report initialize:unable to get document"

    Does excel 2010 compatible on XL Reporter? If yes, can some give me idea on how work on it?
    coz we install office 2010,I already enabled the macros and check the 'trust access to the vba project oblect model on the trust center of excel. When we tried to run the XL Reporter it gives error Ilike this
    "An error occured during the process:'Report Initialize: Error unable to get document. Cause:Automation error.XL Reporter start up failed.'".
    We're using SBO 2007 A SP01 PL13.
    Can some one help me to solve this?

    Hi Gordon, as for now I'm still trying to fix it with the solutions they gave on the other thread but still result to same error.
    To Manvendra, I got the error when trying to run a report. I can open XL Reporter but unable to generate any report
    Edited by: vissia on Jul 6, 2011 1:51 PM

  • XRL Unable to connect to XL Reporter. Cause:Enable to get Document!

    Hi all,
    I make one upgrade from SAP 2005 to SAP 2007 PL47. Now I have one issue with XL Reporter. When i try to run XLR i have the following error.
    Unable to connect to XL Reporter.
    Error! Server communication Failed!
    Cause! Enable to get Document!
    Type:36
    Cause:The XML document must have one upper level.
    Someone can tell me what should have the file MetaInfo.xml, since I do not have any information in that file.
    I Wanted to solve this problem without having to make the upgrade to PL49.
    Best Regard.
    Luis Duarte.

    I already try with new windows user but the problem remains.
    I have to change the database in the server?
    The message is: Unable to get Document!
    XML Document must have a upper level!
    The only XML file that i have in the folder (MetaInfo.XML) don´t have any information.
    I think this file have the connection string to SQL.

  • OBIEE web services: unable to get an html working report

    Hi all,
    I am trying to get an html report using the OBIEE webservices and I am facing some problems when I try display the report.
    I have browsed a lot of websites and my conlusion is thah I might have missed the setBridge method even if I haven't really understood what this method allows me to do (an explanation is appreciated).
    Anyhow, my issue is the following:
    once I build the html page I can see the clock gif image loading ("Searching... To cancel, click here."), but nothing happens.
    I have used the following code:
    +//Get Locale+
    SAWLocale sawlocale = new SAWLocale();
    sawlocale.setLanguage(Locale.getDefault().getLanguage());
    sawlocale.setCountry(Locale.getDefault().getCountry());
    +//Set session parameters+
    SAWSessionParameters sessionParameters = new SAWSessionParameters();
    sessionParameters.setUserAgent( "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)" );
    sessionParameters.setLocale( sawlocale );
    sessionParameters.setAsyncLogon( false );
    +//login+
    SAWSessionServiceSoapClient myPort = new SAWSessionServiceSoapClient();
    myPort.setMaintainSession(true);
    String sessionID = myPort.logonex("xxx","xxx",sessionParameters).getSessionID();
    +//Get report xml definition+
    WebCatalogServiceSoapClient catalogClient = new WebCatalogServiceSoapClient();
    String xmlrep = catalogClient.readObject("<reportPath>",true,sessionID).getCatalogObject();
    +//Set page params+
    StartPageParams pgp = new StartPageParams();
    pgp.setDontUseHttpCookies(true);
    pgp.setIdsPrefix("Pg");
    +//Set report+
    ReportRef rr = new ReportRef ();
    rr.setReportPath("<reportPath>");
    rr.setReportXml(xmlrep);
    +//create page+
    HtmlViewServiceClient htmlClient = new HtmlViewServiceClient();
    String pageID = htmlClient.startPage(pgp,sessionID);
    htmlClient.addReportToPage(pageID,"report1",rr,null,null, null,sessionID);
    +//create html from page+
    String header =  htmlClient.getHeadersHtml(pageID,sessionID);
    String report = htmlClient.getHtmlForReport(pageID, "report1",sessionID);
    String body = htmlClient.getCommonBodyHtml(pageID,sessionID);
    String html = "<html><head>"header+"</head><body>"+body+report+"</body></html>";+
    +//Print out the code+
    System.out.println(html);
    If I put the resulting html code in a .html file, I get no javascript or css errors, but the report does not load.
    Any suggestion would be appreciated.
    Thanks a lot,
    Giovanni

    Hi Ryo,
    Try using the following method instead:
    getHtmlForPageWithOneReport(reportID, reportRef, null, null, null, pageParams, sessionID);
    invoked on HTML Service Object and populate the string returned from the above method into
    a div using inner html.
    Also make sure that you are using IE not any other browser..
    Thanks
    Sai

  • Unable to get Report window

    Im a new user of ARD 2.2 and I try to get 2 compuerts report but the report window's has not allowed to select System Overview, does any body know what's happening...?

    Im a new user of ARD 2.2 and I try to get 2 compuerts report but the report window's has not allowed to select System Overview, does any body know what's happening...?

  • Unable to load the XML Report

    Hi,
    I am using TestStand 3.1. Someone before me has developped a lot of things in our application : specific steps, specific process model, ... . Now this person is not here anymore and I have a test report display problem.
    After an execution, the execution window cannot display the test report and displays the following message :
    "Unable to load the XML Report.
    At line 285 End tag 'NOBR' does not match the start tag 'BR'."
    Also with Internet Explorer, the test report cannot be displayed (and he locates the error at lign 287) .
    Needless to say that I am a poor guy in XML code that's why I am asking you some help.
    But, I opened the .xml with a text editor and that is the part of the code which causes the problem :
    284 </Prop>
    285 <BLOCKQUOTE>
    286 <H5><NOBR>Begin Sequence: MainSequence
    287 <BR>(X:\DATA_Utilisateur\Florian DENEVE\04_GENERIC\GenericTestMainSeq\GenericTestMainSeq.seq)<BR></BR></H5>
    288 <table BORDERCOLOR=#000000 FRAME=BOX RULES=ALL WIDTH=70%><TBODY>
    (please, be careful with the lines numbers, because i don't think that IE and TestStand have the same numbering)
    I don't know if it's a problem of basic TestStand or if it's due to the new process model and modifications realized by my previous colleague.
    Any ideas ?
    Thanks in advance for your help.

    Ok, here they are.
    There is a file called Addons.cfg.sources but I had to rename it to get it to attach
    Attachments:
    Addons.cfg.sources.txt ‏1 KB
    Addons.cfg ‏53 KB
    ResultProcessing.cfg ‏189 KB

  • Unable to get Material No and Description from VBAP

    Hi Gurus
    Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
    regards
    report ZCHGDOC_BY_SALES no standard page heading
                              line-size 132.
    type-pools:
      slis.                     " ALV types
    Tables
    tables:
      cdhdr,                    " Change documents: Header
      cdpos,                    " Change documents: Items
      vbak,                     " Sales order: Header
      mara,                     " Material No
      user_addr,                 " User Address
      vbap.                     " Contract order: Items
    Types
    types:
      begin of ty_cdhdr,
        objectclas like cdhdr-objectclas,     " Object class
        objectid   like cdhdr-objectid,       " Object value
        changenr   like cdhdr-changenr,       " Document change number
        username   like cdhdr-username,       " Changed by
        udate      like cdhdr-udate,          " Changed on
        utime      like cdhdr-utime,          " Changed at
        tcode      like cdhdr-tcode,          " Transaction code
      end of ty_cdhdr,
      ty_it_cdhdr type ty_cdhdr occurs 0,
      begin of ty_cdpos,
        objectclas like cdpos-objectclas,     " Object class
        objectid   like cdpos-objectid,       " Object value
        changenr   like cdpos-changenr,       " Document change number
        tabname    like cdpos-tabname,        " Table name
        tabkey     like cdpos-tabkey,         " Table key
        fname      like cdpos-fname,          " Field name
        chngind    like cdpos-chngind,        " Change indicator
        value_new  like cdpos-value_new,      " New value of field
        value_old  like cdpos-value_old,      " Old value of field
      end of ty_cdpos,
      ty_it_cdpos type ty_cdpos occurs 0,
      begin of ty_dd03l,
        tabname   like dd03l-tabname,
        fieldname like dd03l-fieldname,
        as4local  like dd03l-as4local,
        as4vers   like dd03l-as4vers,
        rollname  like dd03l-rollname,
      end of ty_dd03l,
      ty_it_dd03l type ty_dd03l occurs 0,
      begin of ty_dd04t,
        rollname   like dd04t-rollname,
        ddlanguage like dd04t-ddlanguage,
        as4local   like dd04t-as4local,
        as4vers    like dd04t-as4vers,
        scrtext_l  like dd04t-scrtext_l,
      end of ty_dd04t,
      ty_it_dd04t type ty_dd04t occurs 0,
      begin of ty_kna1,
        kunnr like kna1-kunnr,                 " Customer number
        name1 like kna1-name1,                 " Customer name
      end of ty_kna1,
      ty_it_kna1 type ty_kna1 occurs 0,
       begin of ty_user_addr,
        bname    like user_addr-bname,              " user no
        name_textc like user_addr-name_textc ,      " Username
      end of ty_user_addr,
      ty_it_user_addr type ty_user_addr occurs 0,
      begin of ty_vbap,
        matnr     like vbap-matnr,             " Material No
        arktx     like vbap-arktx,             " Production Description
      end of ty_vbap,
      ty_it_vbap type ty_vbap occurs 0,
      ty_text(500) type c,
      ty_lines type tline,
      ty_it_lines type ty_lines occurs 0,
      begin of ty_merged,
        vbeln     like vbak-vbeln,            " Sales order number
        erdat     like vbak-erdat,            " Created on
        auart     like vbak-auart,            " Order type
        faksk     like vbak-faksk,            " Billing block in SD document
        netwr     like vbak-netwr,            " Net value
        waerk     like vbak-waerk,            " Currency
        vkorg     like vbak-vkorg,            " Sales organisation
        vtweg     like vbak-vtweg,            " Distribution channel
        vkbur     like vbak-vkbur,            " Sales office
        fkara     like vbak-fkara,            " Proposed billing type
        kunnr     like vbak-kunnr,            " Sold-to party
        bname     like vbak-bname ,           " User No
        xblnr     like vbak-xblnr,            " Reference
        fbuda     like vbkd-fbuda,            " Date services rendered
        username  like cdhdr-username,        " Changed by
        udate     like cdhdr-udate,           " Changed on
        utime     like cdhdr-utime,           " Changed at
        tcode     like cdhdr-tcode,           " Transaction code
        tabname   like cdpos-tabname,         " Table name
        tabkey    like cdpos-tabkey,          " Table key
        fname     like cdpos-fname,           " Field name
        chngind   like cdpos-chngind,         " Change indicator
        value_new like cdpos-value_new,       " New value of field
        value_old like cdpos-value_old,       " Old value of field
        scrtext_l like dd04t-scrtext_l,       " Description of field
        intnote   type ty_text,               " Internal note
        hdrnote   type ty_text,               " Header note
        name1     like adrc-name1,            " Sold-to party name
        matnr     like vbap-matnr,            " Material No
        arktx     like vbap-arktx,            " Product Description
      end of ty_merged,
      ty_it_merged type ty_merged occurs 0,
      begin of ty_vbak,
        vbeln    like vbak-vbeln,             " Sales order number
        erdat    like vbak-erdat,             " Created on
        auart    like vbak-auart,             " Order type
        faksk    like vbak-faksk,             " Billing block in SD document
        netwr    like vbak-netwr,             " Net value
        waerk    like vbak-waerk,             " Currency
        vkorg    like vbak-vkorg,             " Sales organisation
        vtweg    like vbak-vtweg,             " Distribution channel
        vkbur    like vbak-vkbur,             " Sales office
        fkara    like vbak-fkara,             " Proposed billing type
        kunnr    like vbak-kunnr,             " Sold-to party
        xblnr    like vbak-xblnr,             " Reference
        objectid like cdhdr-objectid,         " Change document object
      end of ty_vbak,
      ty_it_vbak type ty_vbak occurs 0,
      begin of ty_vbkd,
        vbeln like vbkd-vbeln,                " Sales order number
        posnr like vbkd-posnr,                " Sales order item
        fbuda like vbkd-fbuda,                " Date services rendered
      end of ty_vbkd,
      ty_it_vbkd type ty_vbkd occurs 0.
    Internal tables
    data:
      it_cdhdr    type ty_it_cdhdr,
      it_cdpos    type ty_it_cdpos,
      it_fieldcat type slis_t_fieldcat_alv,
      it_kna1     type ty_it_kna1,
      it_user_addr type ty_it_user_addr,
      it_merged   type ty_it_merged,
      it_vbak     type ty_it_vbak,
    Material No
      it_vbap     type ty_it_vbap,
      it_vbkd     type ty_it_vbkd.
    data:
      wa_vbak  type ty_vbak.
    data:
      st_tvariant  like disvariant,
      st_variant   like disvariant.
    constants:
      co_as4local_a           like dd03l-as4local     " Active version
                              value 'A',
      co_objectclas_verkbeleg like cdhdr-objectclas
                              value 'VERKBELEG',
      co_posnr_initial        like vbkd-posnr         " Initial item number
                              value is initial,
      co_posnr_initial_2        like vbap-posnr         " Initial item number
                              value is initial,
      co_save_u               type c                  " User display variant
                              value 'U',              " saving allowed.
      co_trvog_0              like vbak-trvog         " Sales order
                              value '0'.
    data:
      va_exit                 type c,                 " ALV display
      va_tabix                like sy-tabix.
    selection-screen: begin of block b1 with frame title text-001.
    select-options:
      s_vkorg  for vbak-vkorg OBLIGATORY,            " Sales organisation
      s_vkbur  for vbak-vkbur,            " Sales office
      s_vtweg  for vbak-vtweg,            " Distribution channel
      s_vbeln  for vbak-vbeln,            " Sales order number
      s_usrnme for cdhdr-username,        " Changed by
      s_udate  for cdhdr-udate.           " Changed on
    selection-screen: end of block b1,
                      begin of block b2 with frame title text-002.
    parameters:
      p_varint like disvariant-variant.   " Display variant.
    selection-screen: end of block b2.
    Initialization
    initialization.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    at selection-screen on value-request for p_varint.
    Provide display variant list for this program.
      call function 'REUSE_ALV_VARIANT_F4'
           exporting
                is_variant = st_variant
                i_save     = co_save_u
           importing
                e_exit     = va_exit
                es_variant = st_tvariant
           exceptions
                not_found  = 2.
      if sy-subrc eq 2.
        message id sy-msgid type 'S'
                number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else.
        if va_exit eq space.
          st_variant = st_tvariant.
          p_varint = st_tvariant-variant.
        endif.
      endif.
    At selection screen
    at selection-screen.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    Start of selection
    Extract order details from VBAK
      select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
             kunnr xblnr
             from  vbak
             into  table it_vbak
             where vkorg in s_vkorg
             and   vkbur in s_vkbur
             and   vbeln in s_vbeln.
      if sy-subrc ne 0.
      No data found for selection
        message s001(zgen).
        exit.
      endif.
      loop at it_vbak into wa_vbak.
        va_tabix = sy-tabix.
        wa_vbak-objectid = wa_vbak-vbeln.
        modify it_vbak from wa_vbak
                       index va_tabix
                       transporting objectid.
      endloop.
    if sy-subrc ne 0.
      No data found for selection
       message s001(zgen).
       exit.
    endif.
    loop at it_vbak into wa_vbak.
       va_tabix = sy-tabix.
       wa_vbak-objectid = wa_vbak-vbeln.
       modify it_vbak from wa_vbak
                      index va_tabix
                      transporting objectid.
    endloop.
    Extract  Change data
      select objectclas objectid changenr username udate utime tcode
             from  cdhdr
             into  table it_cdhdr
             for   all entries in it_vbak
             where objectclas eq co_objectclas_verkbeleg
             and   objectid   eq it_vbak-objectid
             and   username   in s_usrnme
             and   udate      in s_udate.
      if sy-subrc eq 0.
        select objectclas objectid changenr tabname tabkey fname chngind
               value_new value_old
               from  cdpos
               into  table it_cdpos
               for   all entries in it_cdhdr
               where fname NE 'CMPRE_FLT'
               and objectclas eq it_cdhdr-objectclas
               and   objectid   eq it_cdhdr-objectid
               and   changenr   eq it_cdhdr-changenr.
      endif.
    Extract customer details from KNA1
      select kunnr name1
             from  kna1
             into  table it_kna1
             for   all entries in it_vbak
             where kunnr eq it_vbak-kunnr.
    ---- Changes are made here -
    Extract Material details from vbap
      select matnr arktx
             from  vbap
             into  table it_vbap
             for   all entries in it_vbak
             where
             vbeln eq it_vbak-vbeln
              and   posnr eq co_posnr_initial.
    -----------------End of Change ----------------------*
    Extract Contract No from vbkd.
      select vbeln posnr fbuda
             from  vbkd
             into  table it_vbkd
             for   all entries in it_vbak
             where vbeln eq it_vbak-vbeln
             and   posnr eq co_posnr_initial.
      perform merge_data tables it_cdhdr
                                it_cdpos
                                it_kna1
                                it_user_addr
                                it_merged
                                it_vbak
                                it_vbap
                                it_vbkd.
      if it_merged[] is initial.
        message s001(zgen).
        exit.
      endif.
    Release memory no longer required.
      free: it_cdhdr,
            it_cdpos,
            it_kna1,
            it_user_addr,
            it_vbak,
            it_vbap,
            it_vbkd.
    Build field catalog for call to report function
      perform build_field_catalog tables it_fieldcat.
    Output report.
      perform output_report tables it_fieldcat
                                   it_merged.
    *&      Form  merge_data
          text
    form merge_data  tables   pa_it_cdhdr  type ty_it_cdhdr
                              pa_it_cdpos  type ty_it_cdpos
                              pa_it_kna1   type ty_it_kna1
                              pa_it_user_addr type ty_it_user_addr
                              pa_it_merged type ty_it_merged
                              pa_it_vbak   type ty_it_vbak
                              pa_it_vbap   type ty_it_vbap
                              pa_it_vbkd   type ty_it_vbkd.
    Local internal tables
    data:
      lit_dd03l type ty_it_dd03l,
      lit_dd04t type ty_it_dd04t.
    Local work areas
    data:
      lwa_cdhdr  type ty_cdhdr,
      lwa_cdpos  type ty_cdpos,
      lwa_dd03l  type ty_dd03l,
      lwa_dd04t  type ty_dd04t,
      lwa_kna1   type ty_kna1,
      lwa_user_addr type ty_user_addr,
      lwa_merged type ty_merged,
      lwa_vbak   type ty_vbak,
      lwa_vbap   type ty_vbap,
      lwa_vbkd   type ty_vbkd.
    Local variables
    data:
      lva_dd03l_tabix like sy-tabix,
      lva_dd04t_tabix like sy-tabix.
    Sort Data
      sort pa_it_cdhdr by objectid changenr.
      sort pa_it_cdpos by objectid changenr tabname tabkey fname.
      sort pa_it_kna1  by kunnr.
      sort pa_it_user_addr by bname.
      sort pa_it_vbak  by vbeln.
       sort pa_it_vbkd  by vbeln.
      loop at pa_it_vbak into lwa_vbak.
        clear lwa_merged.
      Assign sales order fields to reporting work area
        lwa_merged-vbeln = lwa_vbak-vbeln.
        lwa_merged-erdat = lwa_vbak-erdat.
        lwa_merged-auart = lwa_vbak-auart.
        lwa_merged-faksk = lwa_vbak-faksk.
        lwa_merged-netwr = lwa_vbak-netwr.
        lwa_merged-waerk = lwa_vbak-waerk.
        lwa_merged-vkorg = lwa_vbak-vkorg.
        lwa_merged-vtweg = lwa_vbak-vtweg.
        lwa_merged-vkbur = lwa_vbak-vkbur.
        lwa_merged-fkara = lwa_vbak-fkara.
        lwa_merged-kunnr = lwa_vbak-kunnr.
       lwa_merged-bname = 1wa_user_addr-bname.
        lwa_merged-xblnr = lwa_vbak-xblnr.
    Assgin Material to reporting work area
       lwa_merged-matnr  = lwa_vbap-vbeln.
      Get name of sold-to party from PA_IT_KNA1
        clear lwa_kna1.
        read table pa_it_kna1 into lwa_kna1
                              with key kunnr = lwa_vbak-kunnr
                              binary search.
        lwa_merged-name1 = lwa_kna1-name1.
      Get name  from PA_it_user_addr
       clear lwa_user_addr.
       read table pa_it_user_addr into lwa_user_addr
                             with key  = lwa_user_addr-bname
                             binary search.
       lwa_merged-username = lwa_user_addr-name_textc.
      Get business data from PA_IT_VBKD.
        clear lwa_vbkd.
        read table pa_it_vbkd into lwa_vbkd
                              with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-fbuda = lwa_vbkd-fbuda.
    Get Material Data
      clear lwa_vbap.
        read table pa_it_vbap into lwa_vbap
                             with key matnr = lwa_vbap-matnr
                                with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-arktx = lwa_vbap-arktx.
      Get internal note text for sales order
        perform read_text using '0002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-intnote.
      Get header note 1 text for sales order
        perform read_text using 'Z002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-hdrnote.
      Determine if change documents exist for sales order.
        clear lwa_cdhdr.
        read table pa_it_cdhdr into lwa_cdhdr
                               with key objectid = lwa_vbak-objectid.
        if sy-subrc ne 0.
          continue.
        endif.
        loop at pa_it_cdhdr into lwa_cdhdr
                            from sy-tabix.
          lwa_merged-username = lwa_cdhdr-username.
          lwa_merged-udate    = lwa_cdhdr-udate.
          lwa_merged-utime    = lwa_cdhdr-utime.
          lwa_merged-tcode    = lwa_cdhdr-tcode.
          clear lwa_cdpos.
          read table pa_it_cdpos into lwa_cdpos
                                 with key objectid = lwa_cdhdr-objectid
                                          changenr = lwa_cdhdr-changenr
                                 binary search.
          loop at pa_it_cdpos into lwa_cdpos
                              from sy-tabix.
            lwa_merged-tabname   = lwa_cdpos-tabname.
            lwa_merged-tabkey    = lwa_cdpos-tabkey.
            lwa_merged-fname     = lwa_cdpos-fname.
            lwa_merged-chngind   = lwa_cdpos-chngind.
            lwa_merged-value_new = lwa_cdpos-value_new.
            lwa_merged-value_old = lwa_cdpos-value_old.
          Get description for field - determine date element
            clear lwa_dd03l.
            read table lit_dd03l into lwa_dd03l
                                 with key tabname   = lwa_cdpos-tabname
                                          fieldname = lwa_cdpos-fname
                                 binary search.
            lva_dd03l_tabix = sy-tabix.
            if sy-subrc ne 0.
              select single tabname fieldname as4local as4vers rollname
                     from   dd03l
                     into   lwa_dd03l
                     where  tabname   eq lwa_cdpos-tabname
                     and    fieldname eq lwa_cdpos-fname
                     and    as4local  eq co_as4local_a.
              if sy-subrc eq 0.
                insert lwa_dd03l into lit_dd03l
                                 index lva_dd03l_tabix.
              endif.
            endif.
          If data element was found, get description
            if not lwa_dd03l is initial.
              clear lwa_dd04t.
              read table lit_dd04t into lwa_dd04t
                                   with key rollname   = lwa_dd03l-rollname
                                            ddlanguage = sy-langu
                                   binary search.
              lva_dd04t_tabix = sy-tabix.
              if sy-subrc ne 0.
                select single rollname ddlanguage as4local as4vers scrtext_l
                       from  dd04t
                       into  lwa_dd04t
                       where rollname   eq lwa_dd03l-rollname
                       and   ddlanguage eq sy-langu.
                if sy-subrc eq 0.
                  insert lwa_dd04t into lit_dd04t
                                   index lva_dd04t_tabix.
                else.
                  lwa_dd04t-scrtext_l = 'Description for field not found'.
                endif.
              endif.
            endif.
            lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
            append lwa_merged to pa_it_merged.
            at end of changenr.
            Only process field changes for this change document.
              exit.
            endat.
          endloop.
          at end of objectid.
          Initialise work area so we know change document for order has
          been processed.
            clear lwa_merged.
          Only process change documents for this sales order.
            exit.
          endat.
        endloop.
      endloop.
    endform.                    " merge_data
    *&      Form  build_field_catalog
          text
    form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
    data:
    Local variable
      lva_col_pos   type slis_fieldcat_alv-col_pos,
    Local structure
      st_fieldcat   type slis_fieldcat_alv.
      lva_col_pos = 0.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VBELN'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VBELN'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKBUR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKBUR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKORG'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKORG'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'KUNNR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'KUNNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'NAME1'.
      st_fieldcat-ref_tabname   = 'KNA1'.
      st_fieldcat-ref_fieldname = 'NAME1'.
      st_fieldcat-row_pos       = '1'.
        st_fieldcat-outputlen = '15'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'MATNR'.
      st_fieldcat-ref_tabname   = 'VBAP'.
      st_fieldcat-ref_fieldname = 'MATNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'SCRTEXT_L'.
      st_fieldcat-ref_tabname   = 'DD04T'.
      st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
      st_fieldcat-row_pos       = '1'.
       st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'UDATE'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'UDATE'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '10'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'USERNAME'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'USERNAME'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'FNAME'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'FNAME'.
      st_fieldcat-row_pos       = '4'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'CHNGIND'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'CHNGIND'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'WAERK'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'WAERK'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '5'.
      st_fieldcat-col_pos       = lva_col_pos..
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_NEW'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_NEW'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_OLD'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_OLD'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    endform.                    " build_field_catalog
    *&      Form  output_report
          text
    form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
                              pa_it_merged   type ty_it_merged.
    Local variables
    data:
      lva_formname type slis_formname,
      lva_repid    like sy-repid.
      lva_repid = sy-repid.
      lva_formname = 'ALV_USER_COMMAND'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program = lva_repid
          i_callback_user_command = lva_formname
          i_save             = 'A'
          is_variant         = st_variant
          it_fieldcat        = pa_it_fieldcat[]
        tables
          t_outtab           = pa_it_merged
        exceptions
          program_error      = 1
          others             = 2.
    endform.                    " output_report
    *&      Form  alv_user_command
          text
    form alv_user_command using pa_ucomm    like sy-ucomm
                                pa_selfield type slis_selfield.
    Local work areas
    data:
      lwa_merged type ty_merged.
      clear lwa_merged.
      read table it_merged into lwa_merged
                           index pa_selfield-tabindex.
      case pa_selfield-fieldname.
        when 'VBELN'.
        Contract Number
          set parameter id 'AUN' field lwa_merged-vbeln.
         call transaction 'VA03' and skip first screen.
    S_BCE_68001393
    when 'USERNAME'.
        Username
          set parameter id 'username' field lwa_merged-username.
          call transaction 'S_BCE_68001393' and skip first screen.
        when 'KUNNR'.
        Customer number
          set parameter id 'KUN' field lwa_merged-kunnr.
          set parameter id 'VKO' field space.
          set parameter id 'VTW' field space.
          set parameter id 'SPA' field space.
          call transaction 'XD03' and skip first screen.
      endcase.
    endform.                    " alv_user_command
    *&      Form  read_text
          text
    form read_text  using    pa_id
                             pa_inline_count
                             pa_name
                             pa_object
                             pa_text.
    Local internal tables
    data:
      lit_inlines type ty_it_lines,
      lit_lines   type ty_it_lines.
    Local work areas
    data:
      lwa_lines   type ty_lines.
    Local variables
    data:
      lva_tdname    like thead-tdname.
      refresh: lit_inlines,
               lit_lines.
      lva_tdname = pa_name.
      call function 'READ_TEXT_INLINE'
        exporting
          id                    = pa_id
          inline_count          = pa_inline_count
          language              = sy-langu
          name                  = lva_tdname
          object                = pa_object
        tables
          inlines               = lit_inlines
          lines                 = lit_lines
        exceptions
          id                    = 1
          language              = 2
          name                  = 3
          not_found             = 4
          object                = 5
          reference_check       = 6
          others                = 7.
      loop at lit_lines into lwa_lines.
        concatenate pa_text
                    lwa_lines-tdline
                    into pa_text separated by space.
      endloop.
    endform.                    " read_text ENDLOOP.

    Hi
    As per your code here:
    "-------------- Changes are made here ----------------
    *Extract Material details from vbap
    select matnr arktx
    from vbap
    into table it_vbap
    for all entries in it_vbak
    where
    vbeln eq it_vbak-vbeln
    and posnr eq co_posnr_initial.   " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
    " -----------------End of Change ----------------------
    Try as below by commenting the Item Number is INITIAL condition:
    select matnr arktx
       from vbap
       into table it_vbap
       for all entries in it_vbak
       where
       vbeln eq it_vbak-vbeln.
    "and posnr eq co_posnr_initial.
    Regards
    Eswar

  • Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

    Hello Folks,
    Can anyone throw some light into what action is required on my scenario.
    I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
    The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
    I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
    It's asking me for a value to enter for seed at command prompt. "Enter the seed":
    what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
    Please Assit
    Steps Details from Release Notes:
    UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
    Component: Server Infrastructure
    Subcomponent: SWSE
    Product Version: Siebel 8.0.0.12
    Base Bug ID: 11938270
    **Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
    **Use the following workaround to address this issue:
    Navigate to the eappweb/bin directory from the command line on the SWSE installation.
    Run the following command:
    seedgeneratorutil myseed.dat abcdef
    NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
    The myseed.dat file is generated in the eappweb/bin directory.
    Edit eapps.cfg to include the following parameters under the SWE section:
    seedfile = < complete path for myseed.dat >
    Bounce the web server.
    (For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
    Thanks
    Kumar

    Wilson,
    Thanks for your reply.I have repeated the steps and regenerated the error messages.
    Browser
    Message:
    An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
    Initialization error:
    Unable to get the seed from binary file.
    Log
    2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
    ProcessPluginState     ProcessPluginStateError     1     000000024e781b9c:0     2011-09-20 23:23:01     7852: [SWSE] Unable to get the seed from binary file.
    Eapps.cfg
    [swe]
    Language = enu
    Log = errors
    LogDirectory = $(SWSERoot)\log
    ClientRootDir = $(SWSERoot)
    SessionMonitor = False
    AllowStats = true
    LogSegmentSize = 0
    LogMaxSegments = 0
    DisableNagle = False
    seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
    Thanks
    Kumar

  • PerformancePoint in SharePoint 2010 - Unable to get filter values from... Error 10828

    I currently am using PPT to expose data from a Microsoft Analysis Server cube. The cube is wide open and requires no permissions to access.
    The behavior of my filters is odd as sometimes they work perfectly fine, and other times I receive the following error upon report run:
    Unable to get filter values.
    An unexpected error occurred. Error 10828. Additional details have been logged for your administrator.
    I have looked at the ULS logs and found the following:
    An unexpected error occurred.  Error 10828.  Exception details: System.NullReferenceException: Object reference not set to an instance of an object.    
     at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligenceInternal(DataSource dataSource, DateTime currentTime, String formula)    
     at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligence(RepositoryLocation dataSourceLocation, DateTime currentTime, String formula)
    An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:  Microsoft.PerformancePoint.Scorecards.BpmException: Unable to get filter values.  PerformancePoint Services
    error code 20700.
    This is odd to me, as I can trick the report to run by changing the date filters to another day, then back to the original days that error'ed out and everything is fine. Some guidance would be appreciated.

    Hi,
    Do you mean that you have Office 2007 and Office 2010 both installed in you computer?
    Based on my test, I copy a Access 2010 database into a computer only installed Offic 2007, then using Excel 2007 to import Access database data, no error occurred.
    So double click the Access database to see whether the databased is opened with Access 2007 or Access 2010. If it is opened with Access 2010, then try to save it as Access 2007 to
    check the issue.
    Jaynet Zhang
    TechNet Community Support

  • Unable to print xml publisher report in excel format in R12

    Hi All,
    We are unable to print xml publisher report in excel format in R12. We were able to see the excel output but it's printing junk characters while printing and it's printing without any issue with PDF format.
    Please let me know how to fix this issue.
    Thanks,
    Raja

    Hi Raja,
    I presume you have gone through the debugging process of testing your template locally first to get the expected result.....
    If yes, this note might probably be helpful "Changing Output Format to RTF or Excel in XML Publisher Request Does Not Display Output Correctly (Doc ID 404512.1)"
    Good Luck,
    Lamine Balde

  • Table are not prefixed with Schema in  SQL request - Unable to get Data

    I began this new thread because I closed the [previous one|Unable to get data (DSN connection); a little bit early, I believed it was OK but no the problem still here.
    First my architecture :
    Oracle 9g
    +500 Reports made under CR developper 8.5 or 9.0
    Report opened in VB .net application, framework 2.0 using CR runtime 8.5 and 9.0
    We want to upgrade CR version to 2008, so modification of reports will be done with CR 2008 Developper, and we want to
    use only CR 2008 runtime.
    The problem :
    Everything works fine in CR Developer, but the same report with the same parameters failed when called inside .net.
    The error is "Unable to get data", the database connection is OK but the queries mades from inside the report are wrong :
    The tables/views in the from statement are not prefixed with the Schema, so Oracle don't find them.
    Example (SQL monitoring done with TOAD)
    Execution of postes.rpt report directly in CR :
    Timestamp: 10:30:03.881
    Successful logon attempt (session tag: 0x6464CB8)
    username: 'APPLI_HUET'; database: 'DEV'
    SELECT ...
    FROM  "COMMUN"."ETAB" "ETAB" INNER JOIN "GESTION_DES_TEMPS"."POSTES" "POSTES"
    ON "ETAB"."N_ETAB"="POSTES"."N_ETAB"
    WHERE  "POSTES"."N_ETAB"=2 ORDER BY "POSTES"."N_POSTE"
    Timestamp: 10:50:29.178
    Logoff (session tag: 0x6464CB8).
    Same report, same authentication but throught .net program :
    Timestamp: 11:01:24.569
    Successful logon attempt (session tag: 0xA93FC38)
    username: 'APPLI_HUET'; database: 'DEV'
    SELECT ...
    FROM   "ETAB" "ETAB" INNER JOIN "POSTES" "POSTES"
    ON "ETAB"."N_ETAB"="POSTES"."N_ETAB" WHERE  "POSTES"."N_ETAB"=2 ORDER
    BY "POSTES"."N_POSTE"
    Runtime error occurred: 942 (ORA-00942: Table ou vue inexistante)
    The .net code :
    Dim _report As New ReportDocument()
    _report.Load("report.rpt", OpenReportMethod.OpenReportByDefault)
    Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
    myConnectionInfo.ServerName = "DSN_file"
    myConnectionInfo.UserID = p_Userid
    myConnectionInfo.Password = p_Password
    ' to see code in this method se my original post
    SetDBLogonForReport(myConnectionInfo, _report)
    SetDBLogonForSubreports(myConnectionInfo, _report)
    Dim frmViewer As New CrystalReportViewer
    frmViewer.CrystalReportViewer1.ReportSource = _report
    frmViewer.Show()
    Any ideas ?

    Thanks for the and sorry but I don't understand.
    I've made a research of Location on this forum the more intersting thread I've found is rpt-files do not function anymore after deploying to a different database, but I still don't understand.
    I take a look at all code sample and I can't found anything.
    You say that .Location need to be set, indeed Location property of CrystalDecisions.CrystalReports.Engine.Table object only contains table name.
    I tried to overrides this value by the fully qualified table name (ie Schema.Table, for example GESTION_DES_TEMPS.POSTES), and it work  BUT it wouldn't be the solution, my code is designed to be generic, I can't have a database to know wich schema add before differents table name.
    Why when we execute the report directly in CR 2008 developper we don't have to redefine the table location ?
    Another test :
    I've made a new report directly in CR 2008 with a DSN, launch it in .net with the same DSN (server) : OK
    Then I launch it in .net with another DSN, it work also.
    Why report done with Crystal 8.5 or 9.0 have this problem ?
    I'me gonna be mad....
    Edited by: Yoann DAVID on Jan 8, 2010 3:32 PM

Maybe you are looking for

  • Triggering a workflow when the payment proposal F110 is confirmed/finished.

    Hi All, Please kindly give me your good advices that how can I start to create a workflow for payment proposal F100. The requirement is that after the payment proposal has been confirmed and completed. It needs to be triggered and automatically send

  • Quality degradation with the ColorSync Utility?

    Is there any quality loss when one uses Apple's ColorSync Utility to match a new sRGB profile to an image previously colored with Adobe RGB? Since it's having to re-compress the image, is there a risk of significant quality degradation? Here's why I'

  • "Disk not ejected" message appears randomly

    The "disk was not ejected properly" message is continuously coming up on my screen. When "eject" has been highlighted I have clicked on it, but the message still appears from time to time apparently randomly? can anyone help please?

  • Upgrading Soalris8 release 02/02 to Solaris 8 02/04

    Transition of Solaris 8 02/02 from Sunfire V480 to V490. The server is currently on Hardware : V480 Operating system : Solaris 8 Release 02/02 Kernel version: SunOS 5.8 Generic_117350-24 The minimum requirement for V490 is Solaris 8 02/04. The Upgrad

  • Extending network on both sides of Time Capsule

    I need to extend network on both side of Time Capsule. One one side, there is a airport express "n" working great. I have an extra "g" airport express which I'd like to plug in on the other side, but a good distance away (about 125 feet). I could als