I am unable to get Flash sites to run since moving to FF4 from Chrome

I have this issue on both my desktop and Notebook. Both are running Win7. When i go to a site like gizmodo.com it says im missing the plugin, but i download it and install it, restart firefox, and i get the same error.

I can't see Adobe Flash player in your list of plugins, only ''Shockwave Flash For Director'' which is a different app.
You can download the Shockwave Flash player from http://get.adobe.com/flashplayer/

Similar Messages

Unable to get Flash to install/run

For some reason, our youtube videos and many websites
suddenly stopped working. We have an imac (tiger) with intel-based
processor. We uninstalled flash, shut down and rebooted and then
installed flash according to instructions, which, when completed
directs us to Adobe's website showing different versions of flash.
Flash does not show up in applications (in spite of being installed
according to instruction) and videos/ websites still do not
function. I am mystified. Any help or suggestions would be greatly
appreciated. Thanks in advance.

HI joliev2831324
Can you Please attach a screenshot (How to post a screenshot in the forum ) and explain how you are installing flash player on you system?
In the meanwhile you can you try Uninstalling any remain of Flash Player on your system using - Uninstall Flash Player | Mac OS and Re-installing using - Installation problems | Flash Player | Mac - NPAPI for Safari or Firefox and PPAPI for Opera or Opera Dev.
Let us know if this helps.
Piyush

Unable to load flash sites in my tablet

unable to load flash site in my tablet . It shows an error message thath" please update adobe flash" our site requires latest version" when i m clicking to update button, it shows that this content requires adobe flash player , which is not supported by your device.

Most new tablets on android4+ has no flash support.
Hopefully Mozilla shumway made to tablet down the road to support flash, but nothing can help us for now.

I am using a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). How can I get a faster response?

I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.

andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie?

I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.

I restored my computer to factory and now I am unable to get flash player to work.

How do I get flash player to work. I have trouble shooted it. It appears to be there - passes test that indicates it is installed. however when I go to a site where I had crearted a special DVD that I need for cousin's funeral tomorrow, it says I need to update flash player. ???? I'm am stumped and frustrated.

What OS?
What browser?

Need help getting Flash site running after pointed to new nameservers

Can't get Gaia site working on a new server
« on: Today at 03:10:35 PM »
Quote Modify Remove
Hi. I recently switched from 1&1 shared hosting to a new webhost, Holistic.
My Flash site (based on the Gaia framework) doesn't work now.
Using the Flashplayer Debugger, I got the following error:
from Main: view.scaleX = 0.9041666666666667 and view.scaleY = 1.0129032258064516
from Main: view.x = 0 and view.y = 0
Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://www.yourgods.com/bin/main.swf has failed because the server cannot be reached.
*** Security Sandbox Violation ***
Connection to 127.0.0.1:5800 halted - not permitted from http://www.yourgods.com/bin/main.swf
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://www.yourgods.com/bin/main.swf has failed because the server cannot be reached.
Also got this note even though I've set allowscriptaccess to always in my index.html:
Warning: AllowScriptAccess='never' found in HTML. This setting is ineffective and deprecated. See http://www.adobe.com/go/allowscriptaccess for details.
Warning: 'com' has no property 'onEnterFrame'
Regarding the Security Sandbox violation, my old webhost was 1&1, and they are still the official Registrar of YourGods.com - but I now have YourGods.com pointed at the DomainNameServers for my new host, Holistic, which specializes in Drupal and has no experience with Flash - so I hope you'll bear with me and offer what guidance you can since they said I was basically on my own for troubleshooting any Flash related problems.
Is that likely to be the source of my problem (that I'm only 'pointing' to the nameservers and have only 'parked' my domain with the new host instead of transferring it completely?
And if so, do I just need to create a cross domain policy xml file like the one below and leave it on my Old Webhost?
<?xml version="1.0"?>
    <cross-domain-policy>
    <allow-access-from domain="MyNewDedicatedIPAddressHere" />
    </cross-domain-policy>
I've never dealt with this cross domain stuff before so any help would be much appreciated.

As a test, I uploaded my Flash/Gaia site into an existing site on my old host. And although the site actually works in this setting, when I run things in the FlashPlayerDebugger, I'm still getting Security Sandbox Violations - so (as adninjastrator suggested in earlier post), this may have nothing to do with the DNS changes - but perhaps with my setting things up wrong somewhere so that the Flashplayer is trying to access my local computer - maybe??
Debugger logs gives me this:
Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://recreationofthegods.com/bin/main.swf has failed because the server cannot be reached.
*** Security Sandbox Violation ***
So, I've now uploaded the identical bin (which contains all the files for my site) - but I'm getting different behaviors on the two hosts.
On the new holistic servers, the site won't go past the first page: www.yourgods.com
On the 1&1 servers, I still get runtime errors in FlashPlayerDebugger - but the site runs ok - http://www.RecreationOfTheGods.com/bin/index.html
Posting those links in hopes someone with more experience in these sandbox issues can help steer me in the right direction.

I cannot get flash player to work since downloading windows 8.1

Am I missing something??

You're not missing anything. Windows 8.1 installs IE11 by default, and that's the problem. It's not recognized by thousands of pages on hundreds of sites all over the web. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Unable to Delete the Transport Request running since a long time - urgent

Hi all
I had a transport request of a DSO , which is running since a long time.
I had deleted it from STMS , & also from the tables TPSTAT, TRJOB, TRBAT; TMSTLOCKR;TMSTLOCKP
But still the entry is shown running
& because of this all my tranport work is pending , & not moving,
Can anyone help me out.
Regards,
ramesh

Hi
1. There are no more entries in TRBAT.
2. I have deleted the RDSEXCEL jobs also
3. I have restarted the Server as well. & tried to manually buffer the requests to the queue.
But still whevner i refresh the Import MOnitor, it gets hanged.
How do i unlock the queue ?

Unable to load flash site with Windows 8.1 and IE11

Hi,
I have spent days trying to get "mypaychex.com" website to load after logging in using Windows 8.1/IE11. The site loads fine in Windows 7 and other browsers but I need it to work with IE 11/8.1. I have tried using compatibility mode, lowered all
security settings, verified shockwave is enabled within the browser, tried various updates as well. I guess this can only be because flash is embedded now with 8.1. Is there a way to disable the Windows 8.1/IE11 embedded flash and have it use the player from
Adobe instead? Anyone have any other suggestions I can try? Or is this a problem with the website itself not compatible? Any help would be appreciated. TIA

KB956196's list of "products that this article applies to" includes IE6-10,
but not IE11,
and it also does not include Win8.1.
The last review of that KB was Oct 15, 2013.
Methinks MS should either
update the article to include IE11, if appropriate, or
create a new article that specifically applies to IE11.
And perhaps TechNet Support folks could refrain from applying aged boilerplate answers that reference outdated and perhaps irrelevant KB articles, or explain knowledgably in their responses that, while the article appears to reference older versions, its
steps are still appropriate to follow.
I only mention this because, while there is a wealth of info and useful support at this site, everytime I look and try to specify what I'm using, inevitably and invariably more than half the hits on my query are for either outdated or totally irrelevant
applications. Would that there were filter options (see Amazon searches, lefthand side of screen, where you can narrow things down considerably).
I'll shut up now.

Problem: Unable to get Flash Media Live Encoder output in AIR NativeProcess

I'm having an issue interacting with the command line Flash Media Live Encoder 3.1 (FMLECmd) via AIR NativeProcess. I'm not sure if the issue lies with FMLE or with AIR.
When starting the NativeProcess I am displaying the data from standard output to a text window and I get the Adobe copyright message and if I receive an error (for example loading a bad profile) I get all the data from standard output as you would expect.
However, when I successfully start encoding, all I get is the copyright message and nothing else. I don't receive any of the text afterwards with information about the stream, settings, and the NetConnection/NetStream status messages.
If I open a command window and then issue a FMLECmd.exe /s command to stop the stream, I then see all of the status messages sent to my AIR app and it displays everything properly, and also displays that the session is closed as expected. It's almost as if issuing another command flushes the standard output buffer.
I've tried issuing another command via NativeProcess in the AIR app (/h or /s in the example above just to see if that would flush the buffer to get the status messages), but that didn't seem to work.
So it appears either FMLE is not sending that data properly as it should to be recognized, perhaps holding it in the buffer, or AIR is not receiving it properly.

Santmali which Adobe software title is your inquiry in reference too?

Unable to get flash movie to work

Hi
Help - I'm stumped!
I've downloaded a flash template from the web and can't get
it to work (surprise). It gives an error when I try to run it
The template came with the already published swf file which
works fine - but has "your company name" in the banner. I want to
replace it with some other text.
The template also came with the .fla file with it, which I
can open and edit etc, but if I try to run it without even changing
anything it gives me the error
I've spent the last 2 days learning flash (no sleep) and no
joy
The flash movie and source .fla are at
http://70.87.170.2/~gdmt/flash/
Help!
Thanks :-)
The error is
**Error** Symbol=Symbol 41, layer=Layer 1, frame=5:Line 1:
Statement must appear within on/onClipEvent handler
stop();
**Error** Symbol=Symbol 45, layer=Layer 1, frame=5:Line 1:
Statement must appear within on/onClipEvent handler
stop();
Total ActionScript Errors: 2 Reported Errors: 2
Target not found: Target="/drag1" Base="_level0"
... and then repeats the above line forever

under the layer folder "logo", layer "logo", frame 25, you
have a movieclip instance of "Symbol 3",
inside Symbol 3, you have a company logo in Layer 1, company
name in Layer 4, & a slogan in Layer 5. You can either go into
Symbol 3 to modify it, or delete Symbol 3 and design your own logo
with company name to place at the layer.
I believe the original FLA created by older version of flash,
may be it can works properly in Flash 5 / below.
I believe there is no free lunch in this world, no shortcut
to produce a great work, find more references & resources, get
some tutorials, or join training if you can affort, if facing
scripting problem you can come to us, many people here willing to
help.
Good luck

SP2013 Unable to get Cross Site Publishing working

Hi folks,
I am wondering if anyone has a set of instructions for implementing Cross Site publishing in SharePoint 2013
that actually work and are up-to-date.
I'm trying to implement CSP using a simple document library in a product catalog site collection to a publishing site. Created a term set, enabled the library under catalog settings for anonymous, uploaded content, full crawled the library, connected
to the catalog from the publishing site, updated the navigation properties on the publishing site - When I test clicking on the navigation link gives a 'The page you are looking for doesn't exist' so it appears not to be creating the appropriate page.
I've examined a dozen different sets of instructions that are either incomplete or just wouldn't work to see if I am missing a step but cannot identify why I don't see the page with a list of document.
One [potential] issue that I have noticed is that the term I am using has a 'memberof' field. However some times the permissions get correctly updated and sometimes they do not - there appears no way to update or remove values here.
Regards
Andy
Update: I've managed to get a little further (by chance) - after waiting a little longer, I now get the catalogue page displayed, however, there is a warning 'Checked out to you'. I cannot find any documentation around why this
occurs and how to prevent it.
Also, if I click the link of the document, it does not open the document but instead displays the fields from the document properties (name, version, date etc.).

At the moment the best I can get to happen is a list of documents (with large grey boxes above the names) to appear when the navigation link (the term) is selected on the publishing site. Clicking on the links results in a 'page not found' error.
The URL that is generated when I hover the mouse over the document name on the publishing site is in the format of http:server/sites/sitename/term-name/documentname/term-name/15/1.0 I am not sure how that would resolve aback to any
document.
The first reference to term-name appears to be the value in the term-driven-pages tab, Friendly URL for term field out of the term store on the publishing site.
The second reference to term-name appears to be the value in the Navigation tab for the same term.
Edit: I am finally able to open a document successfully. I had to make a couple of changes, the first was to remove the catalog connection and re-create it. The Catalog Item URL Behaviour needed to be set to 'Make URLS point to source
catalog', the second was as above - to edit the content search webpart on the category-xyz page so that it was set to OriginalPath (and remember to check in and publish the page).
Whenever the catalog connection is modified one needs to re-crawl the server - I found that continuous crawl often didn't seem to pick up changes, so for testing I used a full manual crawl.
Also, when re-creating the catalog connection an error about duplicate terms can be ignored (it still creates the catalog connection), but you have to run a full search crawl afterwards.
Now that I know it works, I need to re-do everything from scratch to ensure that it can be replicated. If I get time, I will post up some instructions with all of the issues I encountered listed.

Safari unable to get Flash Player going??

Hi
In Safari Yahoo I am unable to see Videos it says to update /install Flash Player.
I have downloaded but i'm unable to se movies.
All works ok In Chrome.
Thanks for any help
Wilf

Hi Matt
I did re-install Safari and then re-installed Adobe Flash Player, but I can't activate any Movies in Yahoo 7 News ? I did read somewhere that Lions is not suporting Adobe Flash Player??
Sorry
Happy New Year
Wilf

How do I get Flash on Firefox running on 64 bit Windows 7

I have a 64 bit version of Windows 7, but flash does not work on Firefox. I understand that Flash isn't compatible with 64 bit OS's, but supposedly it does work on 32 bit browsers, but I can't seem to get it to install and work.

Your above posted plugins list shows two Flash plugins:
# Shockwave Flash 5.0 r41
# Shockwave Flash 10.0 r45
You need to remove the old Flash 5.0 r41 version, probably installed in the plugins folder in the Firefox program folder.
C:\Program Files\Mozilla Firefox\plugins\NPSWF32.DLL
See also [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You also have an old Shockwave for Director plugin that you also need to update.
# Macromedia Shockwave for Director Netscape plug-in, version 8.5
http://www.adobe.com/shockwave/welcome/

I am unable to get Flash sites to run since moving to FF4 from Chrome

Similar Messages

Maybe you are looking for