I am unable to get into my Mahjong Solitare game at the code entry page

I am unable to get into my Mahjong Solitaire game at the point of the code page. It used to but now is stopping at a support page.

what game? where? what's the relationship between your game and adobe?

Similar Messages

I am unable to get into my IPhone. My 4 digit code is not working and my cell is disabled. I've tried connecting to iTunes to do a reset to factory default however I need the password (my 4 digit code) help!! I've been without my iPhone for 2 days.

I'm locked out of my iPhone. My 4 digit security code is not working. I've tried to connect to iTunes to do a recovery however I. Order to do this it asks me for the 4 digit code. I need to reset it but unable to get into reset as well. Help!!t can I reset it using my iPad which is registered to the same account

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps..

HT4061 I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

Hi, jsgladden.
Here is an article I would recommend when experiencing issues activating a device. The step referring to recovery mode usually resolves the issue.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
To retrieve your data, you will need to restore from backup after processing these steps. Here is the article that walks you through restoring from either your iCloud or iTunes backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Jason H.

Unable to get into config mode in ASA5540

hi,
after issueing the command "aaa authorization command LOCAL" , iam unable to get into the config mode. is there any way to recover without doing password recovery?

Hi,
This link may help you resolve the lockout situation because of AAA settings.
http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/trouble.html#wp1049302

TS3899 I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any sugges

I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any suggestions?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

When I got my ipod I made an account with iTunes from my ipod.yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered. HELP!!

When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.

If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore

ORA-30926: unable to get a stable set of rows in the source tables

hi,
I am loading data from source table to target table in a interface.
Using LKM incremental update .
In the merge rows step , getting the below error.
30926 : 99999 : java.sql.SQLException: ORA-30926: unable to get a stable set of rows in the source tables
please help as what should be done to resolve this.

Below is the query in the merge step...
when i run from SQL also, same error
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause:    A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action:   Remove any non-deterministic where clauses and reissue the dml.
merge into     TFR.INVENTORIES T
using     TFR.I$_INVENTORIES S
on     (
          T.ORGANIZATION_ID=S.ORGANIZATION_ID
     and          T.ITEM_ID=S.ITEM_ID
when matched
then update set
     T.ITEM_TYPE     = S.ITEM_TYPE,
     T.SEGMENT1     = S.SEGMENT1,
     T.DESCRIPTION     = S.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT     = S.LIST_PRICE_PER_UNIT,
     T.CREATED_BY     = S.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE     = S.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG     = S.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY     = S.LAST_UPDATED_BY
     ,T.ID     = TFR.INVENTORIES_SEQ.NEXTVAL,
     T.CREATION_DATE     = CURRENT_DATE,
     T.LAST_UPDATE_DATE     = CURRENT_DATE
when not matched
then insert
     T.ORGANIZATION_ID,
     T.ITEM_ID,
     T.ITEM_TYPE,
     T.SEGMENT1,
     T.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT,
     T.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY
     ,T.ID,
     T.CREATION_DATE,
     T.LAST_UPDATE_DATE
values
     S.ORGANIZATION_ID,
     S.ITEM_ID,
     S.ITEM_TYPE,
     S.SEGMENT1,
     S.DESCRIPTION,
     S.LIST_PRICE_PER_UNIT,
     S.CREATED_BY,
     S.DEFAULT_SO_SOURCE_TYPE,
     S.MATERIAL_BILLABLE_FLAG,
     S.LAST_UPDATED_BY
     ,TFR.INVENTORIES_SEQ.NEXTVAL,
     CURRENT_DATE,
     CURRENT_DATE
     )

MERGE error : unable to get a stable set of rows in the source tables

Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
Annie

Annie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
    select columns_you_need
    from (
        select ftp.columns -- whatever they are
               , int2.columns
               , row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
        from   ftp
        left join int int2
        on (the condition you used in your query)
    where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel

MERGE Statement - unable to get a stable set of rows in the source tables

OWB Client: 10.1.0.2.0
OWB Repository: 10.1.0.1.0
I am trying to create a MERGE in OWB.
I get the following error:
ORA-12801: error signaled in parallel query server P004 ORA-30926: unable to get a stable set of rows in the source tables
I have read the other posts regarding this and can't seem to get a fix.
The target table has a unique index on the field that I am matching on.
The "incoming" data doesn't have a unique index, but I have checked and confirmed that it is unique on the appropriate key.
The "incoming" data is created by a join and filter in the mapping and I'd rather avoid having to load this data into a new table and add a unique index on this.
Any help would be great.
Thanks
Laura

Hello Laura,
The MERGE statement does not require any constraints on its target table or source table. The only requirement is that two input rows cannot update the same target row, meaning that all existing target rows can be matched by at most one input row (otherwise the MERGE would be undeterministic since you don't know which of the input rows you would end up with in the target).
If a table takes ages to load (and is not really big) I suspect that your mapping is not running in set mode and that it performs a full table scan on source data for each target row it produces.
If you ARE running in set mode you should run explain plan to get a hint on what is wrong.
Regarding your original mapping, try to set the target operator property:
Match by constraint=no constraints
and then check the Loading properties on each target column.
Regards, Hans Henrik

My ipod was stolen and i finnaly was able to get into my account after they changed the password is there a way i can fid the locaition of my ipod even if it has died ?

my ipod was stolen and i finnaly was able to get into my account after they changed the password is there a way i can fid the locaition of my ipod even if it has died ?

No. The only way is if the FindMyiPod feature was already set up and wifi is on. However, that can be defeted by turning the iPod off or restoring it. If they have access to the iPod then can just turn the feature off.
If the iPod off/battery drained how would you expect there t be a way of finding it?
Apple will not help.

ORA-30926: unable to get a stable set of rows in the source table

When user are trying to open a form getting below error.
com.retek.platform.exception.RetekUnknownSystemException:ORA-30926: unable to get a stable set of rows in the source tables
Please advice
Edited by: user13382934 on Jul 9, 2011 1:32 PM

Please try this
create table UPDTE_DEFERRED_MAILING_RECORDS nologging as
SELECT distinct a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
a.drank,
c.CONTACT_CD,
c.NEW_CUST_CD,
a.DM_ROW_ID
FROM (SELECT a.ROWID AS DM_ROW_ID,
a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
dense_rank() over(PARTITION BY a.CUST_ID, a.EMP_ID ORDER
BY a.PURCHASE_DATE DESC, a.ROWID) DRANK
FROM deferred_mailing a) a,
customer c
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
and a.drank=1;
The query you've posted is behaving according to the expectations. The inner select is returning one row and the outer is returning two as the
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
conditions are seeing two rows in the table customer.
I've added the a.drank=1 clause to skip the duplicates from the inner table and distinct in the final result to remove duplicates from the overall query result.
For eg, if you have one more row in the deferred_mailing like this
SQL> select * from DEFERRED_MAILING;
CUST_ID EMP_ID PURCHASE_
444 10 11-JAN-11
444 10 11-JAN-11
then the query without "a.drank=1" will return 4 rows like this by the outer query.
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
It'll return the below even if we use distinct on the same query(i.e. without a.drank=1)
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
which contains duplicates again.
So, we need a combination of distinct and dense here.
btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
Regards,
CSM

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported.

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported."

Where is the Library? It needs to be on a disk formatted Mac OS Extended (Journaled)

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?m

I experience similar problem with working in internet. Also use Safari.

HT201365 i downloaded ios 7 and when it asked my passcode to get into my phone I typed in the passcode I was using and it won't let me in.

i downloaded ios 7 and when it asked my passcode to get into my phone I typed in the passcode I was using and it won't let me in.

Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I don't have my phone anymore and need to get access to my contact list. Is there a way to get into my backed up info from the PC I'm using right now?

I don't have my phone anymore and need to get access to my contact list. Is there a way to get into my backed up info from the PC I'm using right now?

You can use another iPhone (or iPad) to restore it too, or you can login to www.icloud.com (assumng you weer using iCloud) and export your contacts from there.

I am unable to get into my Mahjong Solitare game at the code entry page

Similar Messages

Maybe you are looking for