I am unable to get program to recognize document feeder.

Creating, Editing & Exporting PDFs chose configure.  Last comment on this was to get it to use TWAIN driver.  After downloading updated file, adobe still shows printer as WIA.

Hey dianemcpa,
Could you please specify more on the same as what exact issue are you facing so that I can analyze it at my end.
Also, let me know what version of OS and Acrobat are you using.
Hope to hear from you.
Regards,
Anubha

Similar Messages

  • How can I get itunes to recognize my 7th gen. ipod nano

    My wife bought me an ipod nano the other day and I am unable to get itunes to recognize it in the device menu. I have spent over 2 hrs attempting differnt suggestions with no results. I down loaded the newest version of itunes and when I plugged in my ipod nothing popped up and I was never given a chance to set it up. When I open the side bar there is no device option to sync music to the ipod, so what can I do?

    Wile connected to your computer:
    Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
    That is a reset and your nano should show up.

  • I'm unable to get iTunes to show my iPod Touch when I connect. Help!

    Have connected and disconnected 4th gen Touch many times, rebooted pc, etc., and am unable to get iTunes to recognize the player. Help!

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I have been unable to get Photoshop Elements 11 to show in my Open With Programs

    I have been unable to get Photoshop Elements 11 to show in my Open With Programs list. The program is installed but will not show in Open With programs.

    Hi,
    You don't say which operating system you are using so I'll assume Windows 7 for now - try this.
    1) select the file that you want to open
    2) right click on it and go to the Open With option but select Choose default program at the bottom of the list - the following should open
    3) At the bottom of the list, there is Other Programs, you may need to scroll down. If PSE not in the list, continue with the following.
    4) Use the Browse button to browse to the following (omit x86 if on 32bit system)
    "C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
    I'm assuming that you want to open the image in the editor.
    5) Uncheck the Always use... option, otherwise double clicking on the file would cause the editor to open by default.
    6) Click on OK
    PSE should now appear on your open with list.
    Good luck
    Brian

  • HT4061 I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

    I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

    Hi, jsgladden. 
    Here is an article I would recommend when experiencing issues activating a device.  The step referring to recovery mode usually resolves the issue.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    To retrieve your data, you will need to restore from backup after processing these steps.  Here is the article that walks you through restoring from either your iCloud or iTunes backup.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Cheers,
    Jason H.

  • I am unable to get my decently new Imac to recognize or charge my brand new ipod nano.

    I am unable to get my decently new Imac to recognize or charge my brand new ipod nano.  I have tried to restart my computer and the ipod, neither have worked. Running itunes 10.7.  Please help.

    Can you see your device being connected to your iMac in the System Profiler?
    Although this is not an iPod touch, try these suggestions as well:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Suddenly started getting error: Unable to start program 'DTS' when try to execute SSIS Package

    Me and my team member suddenly started getting following error when try to execute SSIS Package in SSDT (VS 2010)
    I searched everywhere but virtually no information available about this Error. Anyone has suggestion on how to fix this error?
    NOTE: Tried to execute package from command line and it works...   
    Error starting debugging.
    ADDITIONAL INFORMATION:
    Unable to start program 'DTS'.
    Operation not supported. Unknown error: 0x80040038. (Microsoft Visual Studio Debugger)
    Thanks,
    Nayan
    <a href="http://binaryworld.net/blogs"> Visit My Blog</a>

    Hi Nayan,
    According to your description, the SSIS package works fine when you execute it with command line, when you execute it in SSDT, you got the error message: Unable to start program 'DTS'.
    To troubleshoot the problem, I would suggest you to upgrade SSDT to latest patch. Please refer to the following steps:
    Download and install the latest Microsoft SQL Server Service Pack.
    Cumulative Update package SQL Server Service Pack.
    Download and install Microsoft Visual Studio 2010 Feature Pack 2.
    For more information about Visual Studio 2010 Feature Packs, please refer to the following document:
    https://msdn.microsoft.com/en-us/vstudio/ff655021.aspx
    If the problem remain unresolved, i would appreciate it if you could give us detailed information about the error, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.
    Wendy Fu
    TechNet Community Support

  • Error while applying a patch "Unable to get the database connection"

    Dear Experts,
    A patch which got successfully applied is failing Production and the error is kind of surprising to me.
    Apps version is 11.5.10.2
    db version is 10.2.0.4
    The worker log file shows
    Time when worker restarted job: Thu Nov 24 2011 22:14:52
    Start time for file is: Thu Nov 24 2011 22:14:52
    adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
      Temporarily resetting CLASSPATH to:
      "/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
      Calling /usr/java14/bin/java ...
    Exception occured
                  Copyright (c) 2003 Oracle Corporation
                     Redwood Shores, California, USA
             XDF(XML Object Description File) Comparison Utility
                            Version 1
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
    AD Run Java Command is complete.
                         Copyright (c) 2002 Oracle Corporation
                            Redwood Shores, California, USA
                                        AD Java
                                     Version 11.5.0
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    AD Worker error:
    The above program failed.  See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Thu Nov 24 2011 22:14:53
    {code}
    The error says database connection error.  I am able to connect to the database using sqlplus.  I tried to restart the failed worker, but the same error is repeating. 
    Any help would be appreciated.
    Thanks
    qARS
    Edited by: user7640966 on Nov 24, 2011 9:07 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hussein,
    One thing which I noticed now is in the apps Tier the
    tnsnames.ora under $TNS_ADMIN
    shows entry like this:
    PROD=
            (DESCRIPTION=
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
                (CONNECT_DATA=
                    (SID=PROD)
            )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
    I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
    Any clue how this can be fixed?
    Thanks
    qARS

  • Unable to get Material No and Description from VBAP

    Hi Gurus
    Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
    regards
    report ZCHGDOC_BY_SALES no standard page heading
                              line-size 132.
    type-pools:
      slis.                     " ALV types
    Tables
    tables:
      cdhdr,                    " Change documents: Header
      cdpos,                    " Change documents: Items
      vbak,                     " Sales order: Header
      mara,                     " Material No
      user_addr,                 " User Address
      vbap.                     " Contract order: Items
    Types
    types:
      begin of ty_cdhdr,
        objectclas like cdhdr-objectclas,     " Object class
        objectid   like cdhdr-objectid,       " Object value
        changenr   like cdhdr-changenr,       " Document change number
        username   like cdhdr-username,       " Changed by
        udate      like cdhdr-udate,          " Changed on
        utime      like cdhdr-utime,          " Changed at
        tcode      like cdhdr-tcode,          " Transaction code
      end of ty_cdhdr,
      ty_it_cdhdr type ty_cdhdr occurs 0,
      begin of ty_cdpos,
        objectclas like cdpos-objectclas,     " Object class
        objectid   like cdpos-objectid,       " Object value
        changenr   like cdpos-changenr,       " Document change number
        tabname    like cdpos-tabname,        " Table name
        tabkey     like cdpos-tabkey,         " Table key
        fname      like cdpos-fname,          " Field name
        chngind    like cdpos-chngind,        " Change indicator
        value_new  like cdpos-value_new,      " New value of field
        value_old  like cdpos-value_old,      " Old value of field
      end of ty_cdpos,
      ty_it_cdpos type ty_cdpos occurs 0,
      begin of ty_dd03l,
        tabname   like dd03l-tabname,
        fieldname like dd03l-fieldname,
        as4local  like dd03l-as4local,
        as4vers   like dd03l-as4vers,
        rollname  like dd03l-rollname,
      end of ty_dd03l,
      ty_it_dd03l type ty_dd03l occurs 0,
      begin of ty_dd04t,
        rollname   like dd04t-rollname,
        ddlanguage like dd04t-ddlanguage,
        as4local   like dd04t-as4local,
        as4vers    like dd04t-as4vers,
        scrtext_l  like dd04t-scrtext_l,
      end of ty_dd04t,
      ty_it_dd04t type ty_dd04t occurs 0,
      begin of ty_kna1,
        kunnr like kna1-kunnr,                 " Customer number
        name1 like kna1-name1,                 " Customer name
      end of ty_kna1,
      ty_it_kna1 type ty_kna1 occurs 0,
       begin of ty_user_addr,
        bname    like user_addr-bname,              " user no
        name_textc like user_addr-name_textc ,      " Username
      end of ty_user_addr,
      ty_it_user_addr type ty_user_addr occurs 0,
      begin of ty_vbap,
        matnr     like vbap-matnr,             " Material No
        arktx     like vbap-arktx,             " Production Description
      end of ty_vbap,
      ty_it_vbap type ty_vbap occurs 0,
      ty_text(500) type c,
      ty_lines type tline,
      ty_it_lines type ty_lines occurs 0,
      begin of ty_merged,
        vbeln     like vbak-vbeln,            " Sales order number
        erdat     like vbak-erdat,            " Created on
        auart     like vbak-auart,            " Order type
        faksk     like vbak-faksk,            " Billing block in SD document
        netwr     like vbak-netwr,            " Net value
        waerk     like vbak-waerk,            " Currency
        vkorg     like vbak-vkorg,            " Sales organisation
        vtweg     like vbak-vtweg,            " Distribution channel
        vkbur     like vbak-vkbur,            " Sales office
        fkara     like vbak-fkara,            " Proposed billing type
        kunnr     like vbak-kunnr,            " Sold-to party
        bname     like vbak-bname ,           " User No
        xblnr     like vbak-xblnr,            " Reference
        fbuda     like vbkd-fbuda,            " Date services rendered
        username  like cdhdr-username,        " Changed by
        udate     like cdhdr-udate,           " Changed on
        utime     like cdhdr-utime,           " Changed at
        tcode     like cdhdr-tcode,           " Transaction code
        tabname   like cdpos-tabname,         " Table name
        tabkey    like cdpos-tabkey,          " Table key
        fname     like cdpos-fname,           " Field name
        chngind   like cdpos-chngind,         " Change indicator
        value_new like cdpos-value_new,       " New value of field
        value_old like cdpos-value_old,       " Old value of field
        scrtext_l like dd04t-scrtext_l,       " Description of field
        intnote   type ty_text,               " Internal note
        hdrnote   type ty_text,               " Header note
        name1     like adrc-name1,            " Sold-to party name
        matnr     like vbap-matnr,            " Material No
        arktx     like vbap-arktx,            " Product Description
      end of ty_merged,
      ty_it_merged type ty_merged occurs 0,
      begin of ty_vbak,
        vbeln    like vbak-vbeln,             " Sales order number
        erdat    like vbak-erdat,             " Created on
        auart    like vbak-auart,             " Order type
        faksk    like vbak-faksk,             " Billing block in SD document
        netwr    like vbak-netwr,             " Net value
        waerk    like vbak-waerk,             " Currency
        vkorg    like vbak-vkorg,             " Sales organisation
        vtweg    like vbak-vtweg,             " Distribution channel
        vkbur    like vbak-vkbur,             " Sales office
        fkara    like vbak-fkara,             " Proposed billing type
        kunnr    like vbak-kunnr,             " Sold-to party
        xblnr    like vbak-xblnr,             " Reference
        objectid like cdhdr-objectid,         " Change document object
      end of ty_vbak,
      ty_it_vbak type ty_vbak occurs 0,
      begin of ty_vbkd,
        vbeln like vbkd-vbeln,                " Sales order number
        posnr like vbkd-posnr,                " Sales order item
        fbuda like vbkd-fbuda,                " Date services rendered
      end of ty_vbkd,
      ty_it_vbkd type ty_vbkd occurs 0.
    Internal tables
    data:
      it_cdhdr    type ty_it_cdhdr,
      it_cdpos    type ty_it_cdpos,
      it_fieldcat type slis_t_fieldcat_alv,
      it_kna1     type ty_it_kna1,
      it_user_addr type ty_it_user_addr,
      it_merged   type ty_it_merged,
      it_vbak     type ty_it_vbak,
    Material No
      it_vbap     type ty_it_vbap,
      it_vbkd     type ty_it_vbkd.
    data:
      wa_vbak  type ty_vbak.
    data:
      st_tvariant  like disvariant,
      st_variant   like disvariant.
    constants:
      co_as4local_a           like dd03l-as4local     " Active version
                              value 'A',
      co_objectclas_verkbeleg like cdhdr-objectclas
                              value 'VERKBELEG',
      co_posnr_initial        like vbkd-posnr         " Initial item number
                              value is initial,
      co_posnr_initial_2        like vbap-posnr         " Initial item number
                              value is initial,
      co_save_u               type c                  " User display variant
                              value 'U',              " saving allowed.
      co_trvog_0              like vbak-trvog         " Sales order
                              value '0'.
    data:
      va_exit                 type c,                 " ALV display
      va_tabix                like sy-tabix.
    selection-screen: begin of block b1 with frame title text-001.
    select-options:
      s_vkorg  for vbak-vkorg OBLIGATORY,            " Sales organisation
      s_vkbur  for vbak-vkbur,            " Sales office
      s_vtweg  for vbak-vtweg,            " Distribution channel
      s_vbeln  for vbak-vbeln,            " Sales order number
      s_usrnme for cdhdr-username,        " Changed by
      s_udate  for cdhdr-udate.           " Changed on
    selection-screen: end of block b1,
                      begin of block b2 with frame title text-002.
    parameters:
      p_varint like disvariant-variant.   " Display variant.
    selection-screen: end of block b2.
    Initialization
    initialization.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    at selection-screen on value-request for p_varint.
    Provide display variant list for this program.
      call function 'REUSE_ALV_VARIANT_F4'
           exporting
                is_variant = st_variant
                i_save     = co_save_u
           importing
                e_exit     = va_exit
                es_variant = st_tvariant
           exceptions
                not_found  = 2.
      if sy-subrc eq 2.
        message id sy-msgid type 'S'
                number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else.
        if va_exit eq space.
          st_variant = st_tvariant.
          p_varint = st_tvariant-variant.
        endif.
      endif.
    At selection screen
    at selection-screen.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    Start of selection
    Extract order details from VBAK
      select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
             kunnr xblnr
             from  vbak
             into  table it_vbak
             where vkorg in s_vkorg
             and   vkbur in s_vkbur
             and   vbeln in s_vbeln.
      if sy-subrc ne 0.
      No data found for selection
        message s001(zgen).
        exit.
      endif.
      loop at it_vbak into wa_vbak.
        va_tabix = sy-tabix.
        wa_vbak-objectid = wa_vbak-vbeln.
        modify it_vbak from wa_vbak
                       index va_tabix
                       transporting objectid.
      endloop.
    if sy-subrc ne 0.
      No data found for selection
       message s001(zgen).
       exit.
    endif.
    loop at it_vbak into wa_vbak.
       va_tabix = sy-tabix.
       wa_vbak-objectid = wa_vbak-vbeln.
       modify it_vbak from wa_vbak
                      index va_tabix
                      transporting objectid.
    endloop.
    Extract  Change data
      select objectclas objectid changenr username udate utime tcode
             from  cdhdr
             into  table it_cdhdr
             for   all entries in it_vbak
             where objectclas eq co_objectclas_verkbeleg
             and   objectid   eq it_vbak-objectid
             and   username   in s_usrnme
             and   udate      in s_udate.
      if sy-subrc eq 0.
        select objectclas objectid changenr tabname tabkey fname chngind
               value_new value_old
               from  cdpos
               into  table it_cdpos
               for   all entries in it_cdhdr
               where fname NE 'CMPRE_FLT'
               and objectclas eq it_cdhdr-objectclas
               and   objectid   eq it_cdhdr-objectid
               and   changenr   eq it_cdhdr-changenr.
      endif.
    Extract customer details from KNA1
      select kunnr name1
             from  kna1
             into  table it_kna1
             for   all entries in it_vbak
             where kunnr eq it_vbak-kunnr.
    ---- Changes are made here -
    Extract Material details from vbap
      select matnr arktx
             from  vbap
             into  table it_vbap
             for   all entries in it_vbak
             where
             vbeln eq it_vbak-vbeln
              and   posnr eq co_posnr_initial.
    -----------------End of Change ----------------------*
    Extract Contract No from vbkd.
      select vbeln posnr fbuda
             from  vbkd
             into  table it_vbkd
             for   all entries in it_vbak
             where vbeln eq it_vbak-vbeln
             and   posnr eq co_posnr_initial.
      perform merge_data tables it_cdhdr
                                it_cdpos
                                it_kna1
                                it_user_addr
                                it_merged
                                it_vbak
                                it_vbap
                                it_vbkd.
      if it_merged[] is initial.
        message s001(zgen).
        exit.
      endif.
    Release memory no longer required.
      free: it_cdhdr,
            it_cdpos,
            it_kna1,
            it_user_addr,
            it_vbak,
            it_vbap,
            it_vbkd.
    Build field catalog for call to report function
      perform build_field_catalog tables it_fieldcat.
    Output report.
      perform output_report tables it_fieldcat
                                   it_merged.
    *&      Form  merge_data
          text
    form merge_data  tables   pa_it_cdhdr  type ty_it_cdhdr
                              pa_it_cdpos  type ty_it_cdpos
                              pa_it_kna1   type ty_it_kna1
                              pa_it_user_addr type ty_it_user_addr
                              pa_it_merged type ty_it_merged
                              pa_it_vbak   type ty_it_vbak
                              pa_it_vbap   type ty_it_vbap
                              pa_it_vbkd   type ty_it_vbkd.
    Local internal tables
    data:
      lit_dd03l type ty_it_dd03l,
      lit_dd04t type ty_it_dd04t.
    Local work areas
    data:
      lwa_cdhdr  type ty_cdhdr,
      lwa_cdpos  type ty_cdpos,
      lwa_dd03l  type ty_dd03l,
      lwa_dd04t  type ty_dd04t,
      lwa_kna1   type ty_kna1,
      lwa_user_addr type ty_user_addr,
      lwa_merged type ty_merged,
      lwa_vbak   type ty_vbak,
      lwa_vbap   type ty_vbap,
      lwa_vbkd   type ty_vbkd.
    Local variables
    data:
      lva_dd03l_tabix like sy-tabix,
      lva_dd04t_tabix like sy-tabix.
    Sort Data
      sort pa_it_cdhdr by objectid changenr.
      sort pa_it_cdpos by objectid changenr tabname tabkey fname.
      sort pa_it_kna1  by kunnr.
      sort pa_it_user_addr by bname.
      sort pa_it_vbak  by vbeln.
       sort pa_it_vbkd  by vbeln.
      loop at pa_it_vbak into lwa_vbak.
        clear lwa_merged.
      Assign sales order fields to reporting work area
        lwa_merged-vbeln = lwa_vbak-vbeln.
        lwa_merged-erdat = lwa_vbak-erdat.
        lwa_merged-auart = lwa_vbak-auart.
        lwa_merged-faksk = lwa_vbak-faksk.
        lwa_merged-netwr = lwa_vbak-netwr.
        lwa_merged-waerk = lwa_vbak-waerk.
        lwa_merged-vkorg = lwa_vbak-vkorg.
        lwa_merged-vtweg = lwa_vbak-vtweg.
        lwa_merged-vkbur = lwa_vbak-vkbur.
        lwa_merged-fkara = lwa_vbak-fkara.
        lwa_merged-kunnr = lwa_vbak-kunnr.
       lwa_merged-bname = 1wa_user_addr-bname.
        lwa_merged-xblnr = lwa_vbak-xblnr.
    Assgin Material to reporting work area
       lwa_merged-matnr  = lwa_vbap-vbeln.
      Get name of sold-to party from PA_IT_KNA1
        clear lwa_kna1.
        read table pa_it_kna1 into lwa_kna1
                              with key kunnr = lwa_vbak-kunnr
                              binary search.
        lwa_merged-name1 = lwa_kna1-name1.
      Get name  from PA_it_user_addr
       clear lwa_user_addr.
       read table pa_it_user_addr into lwa_user_addr
                             with key  = lwa_user_addr-bname
                             binary search.
       lwa_merged-username = lwa_user_addr-name_textc.
      Get business data from PA_IT_VBKD.
        clear lwa_vbkd.
        read table pa_it_vbkd into lwa_vbkd
                              with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-fbuda = lwa_vbkd-fbuda.
    Get Material Data
      clear lwa_vbap.
        read table pa_it_vbap into lwa_vbap
                             with key matnr = lwa_vbap-matnr
                                with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-arktx = lwa_vbap-arktx.
      Get internal note text for sales order
        perform read_text using '0002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-intnote.
      Get header note 1 text for sales order
        perform read_text using 'Z002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-hdrnote.
      Determine if change documents exist for sales order.
        clear lwa_cdhdr.
        read table pa_it_cdhdr into lwa_cdhdr
                               with key objectid = lwa_vbak-objectid.
        if sy-subrc ne 0.
          continue.
        endif.
        loop at pa_it_cdhdr into lwa_cdhdr
                            from sy-tabix.
          lwa_merged-username = lwa_cdhdr-username.
          lwa_merged-udate    = lwa_cdhdr-udate.
          lwa_merged-utime    = lwa_cdhdr-utime.
          lwa_merged-tcode    = lwa_cdhdr-tcode.
          clear lwa_cdpos.
          read table pa_it_cdpos into lwa_cdpos
                                 with key objectid = lwa_cdhdr-objectid
                                          changenr = lwa_cdhdr-changenr
                                 binary search.
          loop at pa_it_cdpos into lwa_cdpos
                              from sy-tabix.
            lwa_merged-tabname   = lwa_cdpos-tabname.
            lwa_merged-tabkey    = lwa_cdpos-tabkey.
            lwa_merged-fname     = lwa_cdpos-fname.
            lwa_merged-chngind   = lwa_cdpos-chngind.
            lwa_merged-value_new = lwa_cdpos-value_new.
            lwa_merged-value_old = lwa_cdpos-value_old.
          Get description for field - determine date element
            clear lwa_dd03l.
            read table lit_dd03l into lwa_dd03l
                                 with key tabname   = lwa_cdpos-tabname
                                          fieldname = lwa_cdpos-fname
                                 binary search.
            lva_dd03l_tabix = sy-tabix.
            if sy-subrc ne 0.
              select single tabname fieldname as4local as4vers rollname
                     from   dd03l
                     into   lwa_dd03l
                     where  tabname   eq lwa_cdpos-tabname
                     and    fieldname eq lwa_cdpos-fname
                     and    as4local  eq co_as4local_a.
              if sy-subrc eq 0.
                insert lwa_dd03l into lit_dd03l
                                 index lva_dd03l_tabix.
              endif.
            endif.
          If data element was found, get description
            if not lwa_dd03l is initial.
              clear lwa_dd04t.
              read table lit_dd04t into lwa_dd04t
                                   with key rollname   = lwa_dd03l-rollname
                                            ddlanguage = sy-langu
                                   binary search.
              lva_dd04t_tabix = sy-tabix.
              if sy-subrc ne 0.
                select single rollname ddlanguage as4local as4vers scrtext_l
                       from  dd04t
                       into  lwa_dd04t
                       where rollname   eq lwa_dd03l-rollname
                       and   ddlanguage eq sy-langu.
                if sy-subrc eq 0.
                  insert lwa_dd04t into lit_dd04t
                                   index lva_dd04t_tabix.
                else.
                  lwa_dd04t-scrtext_l = 'Description for field not found'.
                endif.
              endif.
            endif.
            lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
            append lwa_merged to pa_it_merged.
            at end of changenr.
            Only process field changes for this change document.
              exit.
            endat.
          endloop.
          at end of objectid.
          Initialise work area so we know change document for order has
          been processed.
            clear lwa_merged.
          Only process change documents for this sales order.
            exit.
          endat.
        endloop.
      endloop.
    endform.                    " merge_data
    *&      Form  build_field_catalog
          text
    form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
    data:
    Local variable
      lva_col_pos   type slis_fieldcat_alv-col_pos,
    Local structure
      st_fieldcat   type slis_fieldcat_alv.
      lva_col_pos = 0.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VBELN'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VBELN'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKBUR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKBUR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKORG'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKORG'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'KUNNR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'KUNNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'NAME1'.
      st_fieldcat-ref_tabname   = 'KNA1'.
      st_fieldcat-ref_fieldname = 'NAME1'.
      st_fieldcat-row_pos       = '1'.
        st_fieldcat-outputlen = '15'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'MATNR'.
      st_fieldcat-ref_tabname   = 'VBAP'.
      st_fieldcat-ref_fieldname = 'MATNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'SCRTEXT_L'.
      st_fieldcat-ref_tabname   = 'DD04T'.
      st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
      st_fieldcat-row_pos       = '1'.
       st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'UDATE'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'UDATE'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '10'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'USERNAME'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'USERNAME'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'FNAME'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'FNAME'.
      st_fieldcat-row_pos       = '4'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'CHNGIND'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'CHNGIND'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'WAERK'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'WAERK'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '5'.
      st_fieldcat-col_pos       = lva_col_pos..
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_NEW'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_NEW'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_OLD'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_OLD'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    endform.                    " build_field_catalog
    *&      Form  output_report
          text
    form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
                              pa_it_merged   type ty_it_merged.
    Local variables
    data:
      lva_formname type slis_formname,
      lva_repid    like sy-repid.
      lva_repid = sy-repid.
      lva_formname = 'ALV_USER_COMMAND'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program = lva_repid
          i_callback_user_command = lva_formname
          i_save             = 'A'
          is_variant         = st_variant
          it_fieldcat        = pa_it_fieldcat[]
        tables
          t_outtab           = pa_it_merged
        exceptions
          program_error      = 1
          others             = 2.
    endform.                    " output_report
    *&      Form  alv_user_command
          text
    form alv_user_command using pa_ucomm    like sy-ucomm
                                pa_selfield type slis_selfield.
    Local work areas
    data:
      lwa_merged type ty_merged.
      clear lwa_merged.
      read table it_merged into lwa_merged
                           index pa_selfield-tabindex.
      case pa_selfield-fieldname.
        when 'VBELN'.
        Contract Number
          set parameter id 'AUN' field lwa_merged-vbeln.
         call transaction 'VA03' and skip first screen.
    S_BCE_68001393
    when 'USERNAME'.
        Username
          set parameter id 'username' field lwa_merged-username.
          call transaction 'S_BCE_68001393' and skip first screen.
        when 'KUNNR'.
        Customer number
          set parameter id 'KUN' field lwa_merged-kunnr.
          set parameter id 'VKO' field space.
          set parameter id 'VTW' field space.
          set parameter id 'SPA' field space.
          call transaction 'XD03' and skip first screen.
      endcase.
    endform.                    " alv_user_command
    *&      Form  read_text
          text
    form read_text  using    pa_id
                             pa_inline_count
                             pa_name
                             pa_object
                             pa_text.
    Local internal tables
    data:
      lit_inlines type ty_it_lines,
      lit_lines   type ty_it_lines.
    Local work areas
    data:
      lwa_lines   type ty_lines.
    Local variables
    data:
      lva_tdname    like thead-tdname.
      refresh: lit_inlines,
               lit_lines.
      lva_tdname = pa_name.
      call function 'READ_TEXT_INLINE'
        exporting
          id                    = pa_id
          inline_count          = pa_inline_count
          language              = sy-langu
          name                  = lva_tdname
          object                = pa_object
        tables
          inlines               = lit_inlines
          lines                 = lit_lines
        exceptions
          id                    = 1
          language              = 2
          name                  = 3
          not_found             = 4
          object                = 5
          reference_check       = 6
          others                = 7.
      loop at lit_lines into lwa_lines.
        concatenate pa_text
                    lwa_lines-tdline
                    into pa_text separated by space.
      endloop.
    endform.                    " read_text ENDLOOP.

    Hi
    As per your code here:
    "-------------- Changes are made here ----------------
    *Extract Material details from vbap
    select matnr arktx
    from vbap
    into table it_vbap
    for all entries in it_vbak
    where
    vbeln eq it_vbak-vbeln
    and posnr eq co_posnr_initial.   " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
    " -----------------End of Change ----------------------
    Try as below by commenting the Item Number is INITIAL condition:
    select matnr arktx
       from vbap
       into table it_vbap
       for all entries in it_vbak
       where
       vbeln eq it_vbak-vbeln.
    "and posnr eq co_posnr_initial.
    Regards
    Eswar

  • Sony DCR-DVD505 Handycam: Unable to get video clips, audio

    Evaluating Adobe Premier.  Hopefully helpful for other Sony DCR-DVD505 users.
    Objectives:
    1) Get videos from Sony DCR-DVD505 handycam into Premier Elements
    2) Drag and drop various clips into Sceneline
    3) Insert menu markers
    4) Burn DVD
    Stuck in Step 1, getting video from handycam, unable to get video clips (with audio)
    First Try: NO AUDIO.
    The Sony DCR-DVD505 burns a mini-DVD (1.4 GB) while recording.  After "finalizing" the disk, the media may be imported into the computer.  Streaming was supported by Windows XP driver but is no longer supported in Windows Vista.   In fact, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD drive!  So downgraded to Vista SP1 and used the Sony Picture Motion Browser to import media into computer as MPG files.  Each MPG file is a clip (corresponding exactly to camera record on-off sequence while shooting).  Then opened up Adobe Premier Elements 8.  Used get media to import all the MPG clips into "Organize".  Dragged and dropped various clips...inserted a menu or two and...burned the DVD.  PROBLEM: VIDEO OK, BUT NO AUDIO(?!).  The MPG files on computer play fine (with audio) inside Windows Media Players.  Read all sorts of nonsense about why Adobe Premier (probably old versions) cannot work with "low-quality/compressed" MPG and needs to be a particular type AVI soo....
    Second Try: Capture VOB directly
    Forget the camera.  Insert the mini-DVD directly into computer DVD drive, create a new project and followed directions from  "Lowdown on VOB" http://forums.adobe.com/message/2117743 and "tools to convert to DVI" http://forums.adobe.com/thread/415317.  I loaded the VOB directly and dropped them into  Timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and is neither needed).
    However, File > Export is always GREYED out (unusable).  And the status at bottom right seems to be looping on "Background Rendering".  DO I WAIT?  In any case, the whole video is showing up as a single continuous stream and what I want are the clips from the camera?! 
    Then I tried Prism (again as per the second forum post mentioned above).  It simply did something to process 30 minutes of video and crashed in the end without explanation - saying there was an error in conversion.
    Is this AVI conversion even a good idea?  How would I get my clips back??
    Bottomline.  My mini-DVD and imported MPGs plays fine in Windows Media Player.  However unable to extract the camera clips (with audio).

    Dawg, I have the Sony DCR-DVD305, and have been using it successfully for quite a while with PE7, with few issues, once I had a workflow nailed down.
    I believe the 505 is basically the same camera, with some additional features.
    This workflow worked for me in the past so I'll pass that along:
    Sony Browser to PC as Mpeg.
    Mpeg to Windows Movie Maker, output to DV-AVI, taking default settings.
    DV-AVI imported into PE7.
    This should also work for PE8.
    Upon getting Cyberlinks PowerDirector v7, my new workflow changed to this:
    I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
    PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
    I then load this DV-AVI into PE7.
    (PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
    Other options to try:
    Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
    Or load the VOB or Mpeg into PE, then use that to convert to AVI.
    (Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
    I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
    So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
    Post results, if any of this works for you...
    Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
    http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

  • Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

    I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
    Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
    Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
    Error: 17750, Severity: 16, State: 0.
    Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

    Hi JFriedley,
    According to your error message, there might three reasons for this issue.
    xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
     edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
    Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
    files.
    There is a similar issue about error 17750, you can review the following article.
    http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • How can I get Lion to recognize my boot camp partition.

    Yesterday morning I found my mac suffered from a b-tree failure and was unable to access OS X 10.6. I ended up booting into my Boot camp partition of Windows XP and backed it up then reinstalled Snow leopard. Then I upgraded to Lion, saw it fail due to a partitioning issue, created a 2gb partition called Mac HD 2 (by shrinking mac hd), saw i could install but not full install. So I created another partition and installed Lion successfully. Got into Lion and shrunk my 2x 2GB partitions into one 4GB partition. My Windows XP hard drive boot camp partition was still on my desktop. I can access all the files but I can not boot into it. When I hold down the option key there is only Mac HD or Recovery partition.
    Is there any way to get the boot camp partition to work?
    I did notice that when I was looking through the settings I could choose which HD was the default boot option. Mac hd with 10.7 and a folder called Windows XP were both available.

    We also cannot get Robohelp to recognize our FrameMaker installation. 
    We are using Robohelp 9  and Framemaker 11.
    We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so.  So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
    The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
    "This operation cannot be completed without FrameMaker.  Install FrameMaker and try again."
    I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error.  Buying a set of new Robohelp 10 licenses probably isn't an option.
    Any other suggestions?
    Thanks,
    Sue

  • ERROR: 'Sky Go unable to load program information as there is no Internet connection'

    I was using Sky Go via my iPad and a T-Mobile hot spot generator (Hauwei) to watch programs whilst in my caravan in Devon. Suddenly it stopped working and I now whenever I try and use Sky Go I get the message 'Sky Go unable to load program information as there is no Internet connection'. Obviously I am connected. I have tried reinstalling Sky Go and have completely rebooted the iPad but to no effect. Why has it suddenly stopped working???
    Having returned home I have tried to connect again when the ipad is connected via my BTHomeHub2 but I still get the same message, I have also tried to use BBC iPlayer and I am getting the same error message. What has happened????

    nikhildhoot wrote:
    When the router has an internet connection, the phones automatically connect to the router flawlessly. When there is no internet connection, we get a notification saying "Wi-Fi Connection Limited"
    The limited WiFi Connection issue when there is a good internet connection, is a known issue in the OS releases in the past six months, and has been corrected as far as I can tell on the most recent 10.2.1.3xxx or higher OS.
    But, I would note that when your router has no internet connection, you should expect to get that notification... no internet connection > limited wifi connection.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I open InDesign files from our design team, the fonts don't show up even though I have them installed on my computer. How do I get it to recognize fonts I have installed?

    I use my Adobe programs from the Creative Cloud. When our design agency sends me files, I open them and fonts I have on my computer aren't showing up when I open the file. Everywhere online it says I need to add the fonts to InDesign's font file, but since I'm working out of the Creative Cloud, I don't have that option. How do I get InDesign to recognize these fonts when I'm opening files from our agency?

    ID sees fonts installed on your computer and contained in a Document Fonts folder in the same folder as the document, if one exists.
    I don't really understand what you are saying about fonts you have installed not showing up. And cloud makes no difference -- all the applications and support files are installed on your hard drive.

  • Table are not prefixed with Schema in  SQL request - Unable to get Data

    I began this new thread because I closed the [previous one|Unable to get data (DSN connection); a little bit early, I believed it was OK but no the problem still here.
    First my architecture :
    Oracle 9g
    +500 Reports made under CR developper 8.5 or 9.0
    Report opened in VB .net application, framework 2.0 using CR runtime 8.5 and 9.0
    We want to upgrade CR version to 2008, so modification of reports will be done with CR 2008 Developper, and we want to
    use only CR 2008 runtime.
    The problem :
    Everything works fine in CR Developer, but the same report with the same parameters failed when called inside .net.
    The error is "Unable to get data", the database connection is OK but the queries mades from inside the report are wrong :
    The tables/views in the from statement are not prefixed with the Schema, so Oracle don't find them.
    Example (SQL monitoring done with TOAD)
    Execution of postes.rpt report directly in CR :
    Timestamp: 10:30:03.881
    Successful logon attempt (session tag: 0x6464CB8)
    username: 'APPLI_HUET'; database: 'DEV'
    SELECT ...
    FROM  "COMMUN"."ETAB" "ETAB" INNER JOIN "GESTION_DES_TEMPS"."POSTES" "POSTES"
    ON "ETAB"."N_ETAB"="POSTES"."N_ETAB"
    WHERE  "POSTES"."N_ETAB"=2 ORDER BY "POSTES"."N_POSTE"
    Timestamp: 10:50:29.178
    Logoff (session tag: 0x6464CB8).
    Same report, same authentication but throught .net program :
    Timestamp: 11:01:24.569
    Successful logon attempt (session tag: 0xA93FC38)
    username: 'APPLI_HUET'; database: 'DEV'
    SELECT ...
    FROM   "ETAB" "ETAB" INNER JOIN "POSTES" "POSTES"
    ON "ETAB"."N_ETAB"="POSTES"."N_ETAB" WHERE  "POSTES"."N_ETAB"=2 ORDER
    BY "POSTES"."N_POSTE"
    Runtime error occurred: 942 (ORA-00942: Table ou vue inexistante)
    The .net code :
    Dim _report As New ReportDocument()
    _report.Load("report.rpt", OpenReportMethod.OpenReportByDefault)
    Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
    myConnectionInfo.ServerName = "DSN_file"
    myConnectionInfo.UserID = p_Userid
    myConnectionInfo.Password = p_Password
    ' to see code in this method se my original post
    SetDBLogonForReport(myConnectionInfo, _report)
    SetDBLogonForSubreports(myConnectionInfo, _report)
    Dim frmViewer As New CrystalReportViewer
    frmViewer.CrystalReportViewer1.ReportSource = _report
    frmViewer.Show()
    Any ideas ?

    Thanks for the and sorry but I don't understand.
    I've made a research of Location on this forum the more intersting thread I've found is rpt-files do not function anymore after deploying to a different database, but I still don't understand.
    I take a look at all code sample and I can't found anything.
    You say that .Location need to be set, indeed Location property of CrystalDecisions.CrystalReports.Engine.Table object only contains table name.
    I tried to overrides this value by the fully qualified table name (ie Schema.Table, for example GESTION_DES_TEMPS.POSTES), and it work  BUT it wouldn't be the solution, my code is designed to be generic, I can't have a database to know wich schema add before differents table name.
    Why when we execute the report directly in CR 2008 developper we don't have to redefine the table location ?
    Another test :
    I've made a new report directly in CR 2008 with a DSN, launch it in .net with the same DSN (server) : OK
    Then I launch it in .net with another DSN, it work also.
    Why report done with Crystal 8.5 or 9.0 have this problem ?
    I'me gonna be mad....
    Edited by: Yoann DAVID on Jan 8, 2010 3:32 PM

Maybe you are looking for