I am unable to get the dots off of my calander.

I am still unable to remove the dots from my calander. Any other suggestions?

Having the same problem - dots on every day in iPhone calendar.
Mine are emanating from a "US Holidays" group that I believe is synched from Outlook - not 100% sure though.
If all other calendar groups I have are turned off on the iPhone, the dots are still there. With this group turned off, the dots disappear.
Nothing appears on the days on other computers this are synched to MobileMe, including a Mac and a PC - all show blank days on the calendar days when nothing is scheduled. Only the iPhone has dots on every day.
Help and TIA.

Similar Messages

  • I had to replace the hardrive on my laptop. I have over 2000 photos in an album on my iPod Touch but I am unable to get the pictures off the iPod and back onto my computer. Suggestions?

    I am in need of assistance with syncing photos on my iPod onto my laptop. Had to replace the hardrive on the laptop and I'm unable to get the photos synced from the iPod.     

    - If the photos were taken by or saved to the iPod just use the computer's camera/image capture software to get them from the iPod.
    - If the photos were synced to the iPod you need a third-party program such as PhoneView of TouchCopy.

  • Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

    I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off".  I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
    Can somebody advice.
    Thanks

    Can you please confirm me the following steps...
    Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
    Make sure your setting for that composite is not Off, keep inherit or production or development.
    Thanks,
    N

  • CUPS 8.5.2 and CUCPC 8.5.1.18771, unable to get the status of hard phone off / on hook

    Hi
    we have CUCM 8.5.1 , CUPS 8.5.2 and CUCPC  8.5.1.18771 , we are able to login to CUPC but we are unable to get the hardphone status on the  like , on phone.

    There is actually a whole section of the Cisco Unified Presence Deployment Guide dedicated to this topic. You need to create a SIP trunk with special permissions between CUCM and CUP. Have you read through this section and confirmed each part is correctly configured?
    If you have, do you see the PUBLISH events in the CCM SDI traces being sent to CUP? Does the CUP server receive this in the SIP Proxy log? If so, what does it say about it? Note that you would need to turn up trace levels on both products to see this level of detail.

  • Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

    We are attempting to use patch plan to apply PSU and one-offs to a new 12.1.0.2 database oracle home.  Our EM version is 12.1.0.4.
    We are experiencing the same issue described in ''Bug 20271609 : Unable to get the version of OPatch".   This bug is closed as 'duplicate bug to filer' but we do not appear to have visibility into what patch/bug fixes the issue.
    Description from the above mentioned bug is our same issue.  We do not have this issue when we use patch plans against an 11.2.x oracle_home target.  It is unique to 12.1.0.2 oracle_home target.
    Description from the bug:
    The Plan failed in step "Run Prerequisite Checks" with the following errors:
    PREREQ_NAME: Minimum Version of OPatch
    PREREQ_DESC: Check if the required version of OPatch is present on the target
    PREREQ_TYPE: PATCH_TOOL_CHECK
    PREREQ_STATUS: FAILED
    PREREQ_MESG: Unable to get the version of OPatch at
    /u01/app/oracle/product/12.1.0/dbhome_2/Opatch
    We have opened an SR to see if we can get more info on what was already identified as a bug.  Has anyone else experienced this issue?  If so, can you share any patches or workarounds (other than manually applying patches) that you found useful?
    Thanks.

    You'll probably get the same info from Support, but the workaround is to use the Patch Database (however that doesn't work if there's no DB target associated to that home).   If you were trying to do patchign out of place (clone home, patch, then move db's), EM can do this for you.   If you're just installing a new DB Home and trying to patch, then i don' think there's another workaround.  The base bug is marked fixed though, so a backport for the 12.1.0.6 plugin should be available very soon.  I would ask the support analyst to request the backport for your plugin/patch level...

  • In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

    In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

    Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
    Might try this...
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
    Then move these files to the Desktop for now...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    /Users/YourUserName/Library/Preferences/com.apple.Preview.plist
    /Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

  • I took a photo using burst mode on my 5S and can't get the picture off my phone

    I took a  photo using burst mode on my iPhone 5S.  The "burst" consists of 4 photos, originally.  I have picked my favorite and deleted the others.  Still, I am unable to get that photo off of my phone using Photo Stream, or e-mail.
    Normally, my photos end up in Photo Stream and I can access them from my computer, but this photo that used to be part of a burst, and even while it WAS a burst, doesn't appear in my Photo Stream nor can I email it to myself.  I was able to eventually SMS the photo to a colleague who then emailed it back to me, so now it's on my computer but why can't I get that image off of my iPhone using my usual and straight-forward methods??
    I was able to pull it off using iPhoto so that works.  My burst only had 4 photos but like I said, I picked my favorite and deleted the rest and I could never e-mail it to myself or access it on my computer using Photo Stream.
    Thanks.

    This happens every single time a new camera comes out from one of the two big camera makers. Nikon and Canon do not send preproduction units to Adobe, so Adobe has to go out and buy a D750 or whatever from the store to test and profile it before they can update Lightroom. They can't get one earlier than you and I can. The profiling is quite an extensive operation. Other camera makers do send preproduction units, use dng, or do the profiling in-house and there you often get support right from release. If camera makers would finally embrace an open raw format such as dng, this whole problem would be gone but both Canon and Nikon seem to think they live in an upside-down world where their clients only use their software.
    Usually the dead period only lasts a few weeks but it is frustrating nevertheless. My only advice is to not buy a new camera at the day of release and expect to have third parties to support it. You definitely should not be buying these cameras right away if your business depends on it. Aperture, Capture One, etc. have the exact same problem. No third party (read non-Nikon in this case) will support the camera from the release date. Some are quicker than other adding support. Adobe is somewhere in the middle of the pack in this respect. Nobody outside of Adobe knows when an update comes out. Could be tomorrow, could be a few more weeks or a month. They might jump straight to Lightroom 6 and never add direct support to LR 5. Sometimes they will first bring out a beta version of dng converter that will convert the new camera's nef files to dng, which will work fine in the current Lightroom before updating Lightroom itself.

  • Re: Satellite C855-1GQ - Health Monitor is unable to get the disk information

    On my new C855-1GQ the 'Health Monitor' states that it is unable to get the disk information and so cannot use the alert function.
    Is this normal?
    I can turn this bubble off but just thought that I would ask anyway.
    Thanks - Joe

    This is just an notification so you can turn it off if you want.

  • Error while applying a patch "Unable to get the database connection"

    Dear Experts,
    A patch which got successfully applied is failing Production and the error is kind of surprising to me.
    Apps version is 11.5.10.2
    db version is 10.2.0.4
    The worker log file shows
    Time when worker restarted job: Thu Nov 24 2011 22:14:52
    Start time for file is: Thu Nov 24 2011 22:14:52
    adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
      Temporarily resetting CLASSPATH to:
      "/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
      Calling /usr/java14/bin/java ...
    Exception occured
                  Copyright (c) 2003 Oracle Corporation
                     Redwood Shores, California, USA
             XDF(XML Object Description File) Comparison Utility
                            Version 1
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
    AD Run Java Command is complete.
                         Copyright (c) 2002 Oracle Corporation
                            Redwood Shores, California, USA
                                        AD Java
                                     Version 11.5.0
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    AD Worker error:
    The above program failed.  See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Thu Nov 24 2011 22:14:53
    {code}
    The error says database connection error.  I am able to connect to the database using sqlplus.  I tried to restart the failed worker, but the same error is repeating. 
    Any help would be appreciated.
    Thanks
    qARS
    Edited by: user7640966 on Nov 24, 2011 9:07 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hussein,
    One thing which I noticed now is in the apps Tier the
    tnsnames.ora under $TNS_ADMIN
    shows entry like this:
    PROD=
            (DESCRIPTION=
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
                (CONNECT_DATA=
                    (SID=PROD)
            )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
    I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
    Any clue how this can be fixed?
    Thanks
    qARS

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • I need to get the music off my Ipod Nano 2nd GEN onto either ITunes or in a music foldes on my new computer. Not all the music was purchased from Apple Itunes HOW DO I DO THIS WITHOUT LOOSING ALL MY MUSIC??

    I have not had a computer for several years and I just got a new one. My old computer got a virus and when that happened all my music was lost. Thank goodness I had it all on my Ipod Nano 2nd GEN. Now my problem is that I don't know how to get the music off my Ipod Nano onto my new computer!!! I was able to get the songs that I purchased thru ITunes by just authorizing my new computer. But I have alot more music that is on my Ipod nano that I can't put into my ITunes library. In fact, I can't even get my music into a file folder on my computer!! I really need help. I don't have any copies of the music anywhere else and some of it is hard to get. How do I get my music either into ITunes or into a file folder on my new computer or even if I could get my computer to recognize my Ipod and sync all the music into windows media or something like that. Every time I connect my IPod all that happens is that it tells me if I sync the IPod that it will replace all the music from my ITunes library on to my IPod. And I am guessing that means all my music on the IPod will be erased. PLEASE HELP ME!!!! Thanks from the bottom of my songsters heart

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • Unable to get the values from PAYLOAD

    Hi,
    i'm unable to get the values of payload. When i use
    currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
    Element payload = (Element)currentTask.getPayloadAsElement();
    node = (Element)payload.getFirstChild();
    System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
    I get null but i instantiate the bpel process with a value and i have
    - <payload>
    - <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
    <ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
    <ns1:documentName>bvnbvnvn</ns1:documentName>
    <ns1:URI>http://www.first.pt</ns1:URI>
    <ns1:assignees>gestdoc</ns1:assignees>
    <ns1:groups />
    </ns1:DocumentReviewProcessRequest>
    </payload>
    if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
    I get a normal erro 'cause this variable don't exist...
    Can someone please help me?
    Thanks!!

    I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
    Like this:
    com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
    Please reward the points if this helps.

  • Unable to get the response from dynamic partnerlink

    Hi
    I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
    <binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="onResult">
    <soap:operation soapAction="onResult" style="document"/>
    <input>
    <soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
    <soap:body use="literal"/>
    </input>
    </operation>
    </binding>
    <service name="LoanServiceCallbackService">
    <port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
    <soap:address location="http://openuri.org"/>
    </port>
    </service>
    please help me on this
    thanks
    Srikanth

    Hi, thanks for the input
    Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
    With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

  • Unable to get the media from the Endeca Experience manager version 11.0.0

    Hi.,
    Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
    I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
    I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
    ThankYou!!!
    C:\>cd Endeca\apps\CRS\control
    C:\Endeca\apps\CRS\control>get_media.bat
    [07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
    [07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
    [07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
    [07.04.14 11:48:10] INFO: Definition updated.
    [07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
    [07.04.14 11:48:11] INFO: Finished exporting resource.

    What media are you trying to import?  There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd.  However, it's preferable to use the media MDEX rather than storing media in the ECR.

Maybe you are looking for