I am unable to get the HUD display to appear...help

My first use of my new CS5 is was to try the new HUD color picker. I picked a brush tool...held down shift+alt+right-click and went of the image and held it. Nothing happened. I just get a cursor with the eye-dropper and a plus sign onder it and a little circle above it. I watched it on Lynda.com. but was unable to replicate what I saw. I tried it on my laptop and my desktop. Both...nothing. I set it to both wheel and strip in preferences.
Need help with this...thanks.

I tried to set this in preferences...but it will not allow me to with the laptop. I upgraded the drivers to the desktop and it works there...but the Fujitsu T5010 does not have the openGL capabilities needed.
Thanks for the input. Sure appreicate that.

Similar Messages

Unable to get the graphical display of Business process in BPMon

Hi,
I am working on solution manager 7.1. I have set up a business process for monitoring in the BPMon session. But i am not getting the graphical display in the business process operations workcenter in the graphical view tab.
Can anyone tell me how can i get that.
Regards
Vishal

Hi,
Please run run report RTCCTOOL and see if any addon is not up-to-date.
Please run this repport and follow the recommendations to update those
components to the latest status.
Afterwards please also intall the latest version of following note: 1570282 - Advance Corr. BPMon ST-A/PI 01N
Finally please deactivate BPMon, regenerate and re-activate agin.
Also check BPM troubleshooting guide:
https://websmp102.sap-ag.de/~sapdownload/011000358700001186112010E/
Troubleshooting_for_BPMon.pdf
Thanks
Vikram

I am unable to get the resize pointer to appear.

I often use the resize pointer to adjust Excel column sizes and Desktop window sizes. In perhaps the past month or so, I haven't been able to get this cursor even to appear. If I hold the arrow pointer to a column edge or a window edge, it appears to flash very rapidly between the arrow pointer and the resize pointer, but I can't get the resize pointer to remain and be used.
My apologies for opening a new issues, but I have not been able to find this issue clearly described, or any significant solution to cursor problems. It took a lot of searching just to learn the term "resize pointer".
I have a 2009-ish MBP and OS X 10.8.4. I also have a Magic Mouse connected, but the problem occurs on either the mouse or the trackpad, and whether or not the mouse is connected.
Thanks.

Wow! All fixed. I ran defaults delete -g which did not show immediate improvement, but then I rebooted. I must admit I did a Safe Boot, just to throw in one other solution I had seen. However, everything is back to normal. Thanks very much.

Unable to get the form displayed in Working Time

Hi,
We are implementing ESS with ECC5.0 on EP6. When I go for Working time and click on Time Statement for a Chosen period .. below it doesn't display me the form needed.
I have checked from the Tx : HRFORMS, the Form Name :SAP_TIM_99_0001 & 0002 are active.
Is there anything else i need to configure at the r/3 end to get that display on portal?
Need help on this ..
Thnks in advance.
Vijay

Hi Aniket,
To the Clusters .. do you mean at the j2ee engine side?can you please give me info in detail
Thnx for valuable inputs
Vijay
Message was edited by:
NR

HT204291 I have downloaded latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

I have downloaded the latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

Can we assume you are bringing up the "Control Center" and the Airplay icon is not there?
http://www.apple.com/ios/whats-new/
Do you have the "AirDrop" icon?

Unable to get the item value in cursor

I have function which returns organization_id for each item selected in Sales Order window.
From this function I will populate warehouse value in shipping tab whenever i am tabbing out from ordered item in Sales Order Form.
But my cursor is unable to get the item id value (Ex: FOR cur_rec IN cus_l (l_item_id)). It is directly going to last return statement and displaying default value.
Please help me out.
FUNCTION custom_default_rule (
p_database_object_name IN VARCHAR2,
p_attribute_code IN VARCHAR2
RETURN NUMBER
AS
l_line_type_rec oe_order_cache.line_type_rec_type;
l_item_id NUMBER;
p_org_id NUMBER;
CURSOR cus_l (p_item_id IN NUMBER)
IS
SELECT a.organization_id, b.element_name, b.element_value
FROM mtl_parameters a,
mtl_descr_element_values b,
mtl_system_items_b c
WHERE b.inventory_item_id = c.inventory_item_id
AND a.organization_id = c.organization_id
AND a.organization_id = c.organization_id
AND c.inventory_item_id = p_item_id
AND a.organization_id <> a.master_organization_id
ORDER BY a.organization_id;
CURSOR cur_org (p_org_id IN NUMBER)
IS
SELECT organization_code
FROM mtl_parameters
WHERE organization_id = p_org_id;
BEGIN
l_line_type_rec :=
oe_order_cache.load_line_type
(ont_line_def_hdlr.g_record.line_type_id);
l_item_id := ont_line_def_hdlr.g_record.inventory_item_id;
FOR cur_rec IN cus_l (l_item_id)
LOOP
IF cur_rec.element_name IN
('Frequency',
'Emission Norms',
'Voltage',
'Duty Rating',
'Phase',
'Product Family'
AND cur_rec.element_value IN
('50',
'Dual',
'Euro',
'210',
'230',
'440',
'Low',
'Medium',
'Heavy',
'Three',
'QSK60',
'QSK15',
'QSK10',
'DQK50'
THEN
RETURN cur_rec.organization_id;
If u want more info. abt function refer: Refer "PL/SQL API + Defaulting Rules in OM" in Forums.oracle.com
(OR)
PL/SQL API + Defaulting Rules in OM
Please help me out. This is very urgent.
Thanks & Regards,
Sateesh Kumar

Hi Suresh,
I tried like below:
create or replace FUNCTION custom_default_rule (
p_database_object_name IN VARCHAR2,
p_attribute_code IN VARCHAR2
RETURN NUMBER
AS
l_line_type_rec oe_order_cache.line_type_rec_type;
     l_line_rec OE_AK_ORDER_LINES_V%ROWTYPE;
l_item_id NUMBER;
p_org_id NUMBER;
CURSOR cus_l (p_item_id IN NUMBER)
IS
SELECT a.organization_id, b.element_name, b.element_value
FROM mtl_parameters a,
mtl_descr_element_values b,
mtl_system_items_b c
WHERE b.inventory_item_id = c.inventory_item_id
AND a.organization_id = c.organization_id
AND a.organization_id = c.organization_id
AND c.inventory_item_id = p_item_id
AND a.organization_id <> a.master_organization_id
ORDER BY a.organization_id;
CURSOR cur_org (p_org_id IN NUMBER)
IS
SELECT organization_code
FROM mtl_parameters
WHERE organization_id = p_org_id;
BEGIN
l_line_type_rec :=
oe_order_cache.load_line_type(ont_line_def_hdlr.g_record.line_type_id);
     l_line_rec := ONT_line_Def_Hdlr.g_record;
--      l_item_id := l_line_rec.inventory_item_id;
-- FOR cur_rec IN cus_l (l_item_id)
     FOR cur_rec IN cus_l(l_line_rec.inventory_item_id)
LOOP
IF cur_rec.element_name IN
('Frequency',
'Emission Norms',
'Voltage',
'Duty Rating',
'Phase',
'Product Family'
AND cur_rec.element_value IN
('50',
'Dual',
'Euro',
'210',
'230',
'440',
'Low',
'Medium',
'Heavy',
'Three',
'QSK60',
'QSK15',
'QSK10',
'DQK50'
THEN
RETURN cur_rec.organization_id;
FOR cur_rec_org IN cur_org (p_org_id)
LOOP
RETURN cur_rec_org.organization_code;
END LOOP;
END IF;
END LOOP;
RETURN '204';
EXCEPTION
WHEN OTHERS
THEN
IF oe_msg_pub.check_msg_level (oe_msg_pub.g_msg_lvl_unexp_error)
THEN
oe_msg_pub.add_exc_msg ('OE_Default_PVT', 'CUSTOM_DEFAULT_RULE');
END IF;
RAISE fnd_api.g_exc_unexpected_error;
END custom_default_rule;
This function executed without errors. But it is displaying final return statement value (i.e., 204).
I am not getting inventory_item_id value to my cursor.
Please help me out...It is very urgent.
Thanks & Regards,
Sateesh Kumar S
Message was edited by:
user610830

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Unable to get the values from PAYLOAD

Hi,
i'm unable to get the values of payload. When i use
currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
Element payload = (Element)currentTask.getPayloadAsElement();
node = (Element)payload.getFirstChild();
System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
I get null but i instantiate the bpel process with a value and i have
- <payload>
- <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
<ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
<ns1:documentName>bvnbvnvn</ns1:documentName>
<ns1:URI>http://www.first.pt</ns1:URI>
<ns1:assignees>gestdoc</ns1:assignees>
<ns1:groups />
</ns1:DocumentReviewProcessRequest>
</payload>
if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
I get a normal erro 'cause this variable don't exist...
Can someone please help me?
Thanks!!

I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps.

Unable to get the response from dynamic partnerlink

Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
Srikanth

Hi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

Unable to get the media from the Endeca Experience manager version 11.0.0

Hi.,
Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
ThankYou!!!
C:\>cd Endeca\apps\CRS\control
C:\Endeca\apps\CRS\control>get_media.bat
[07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
[07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
[07.04.14 11:48:10] INFO: Definition updated.
[07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
[07.04.14 11:48:11] INFO: Finished exporting resource.

What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

Why iam unable to get the valu from combobox

when i run this code
everytime iam getting blank alert
y iam unable to get the selected item from combo box
thank u
<%@ page import="java.util.Date"%>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%><%@page import="java.sql.*,java.util.*,java.text.*,java.util.ArrayList, java.util.List,org.joda.time.DateTimeConstants,org.joda.time.LocalDate,
org.joda.time.Weeks"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <TITLE>Reading Data From Text Fields</TITLE>
</HEAD><BODY onload=Datevalue()>
     <form name="form1" action ="" method="post" onSubmit="update();">
    <img src="nendrasys_logo.gif" align="right"></img>
<b><font color="669900"><h4 align="left">UserName:</font>
<jsp:useBean id="user" scope="session" class="nendrasys.User" />
<jsp:getProperty name="user" property= "name"/>
&nbsp&nbsp&nbsp&nbsp
<b><font color="90be00"><h4 align="left">Designation:</font>
<jsp:getProperty name="user" property= "designation"/>
<br><font color="669900"><h4 align="right">Project:</font>
    <select name="Projects">
     <option>Project:1</option>
     <option>Project:2</option>
     <option>Project:3</option>
     <option>Project:4</option>
     <option>Project:5</option>
</select>
<%! String s; %>
<% DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd");
        Date date = new Date();
        //out.println(dateFormat.format(date));
            s= dateFormat.format(date);
%>
<select name="Dates" sizes=1 id="dates" onchange="Datevalue(this.value)">
<script type="text/javascript">

</script>
<br><br>
<TABLE BORDER="2" BORDERCOLOR="#336699" CELLPADDING="2" CELLSPACING="2" WIDTH="100%">
<TR>
<TD>&nbsp&nbsp&nbsp</TD>
<TD bgcolor="669900"><label id="sun"></label></TD>
<TD bgcolor="90be00"><label for="mon" id="Mon">Mon</label></TD>
<TD bgcolor="669900"><label for="tue" id="tue">Tue</label></TD>
<TD bgcolor="90be00"><label for="wed" id="wed">Wed</label></TD>
<TD bgcolor="669900"><label for="thu" id="thu">Thu</label></TD>
<TD bgcolor="90be00"><label for="fri" id="fri">Fri</label></TD>
<TD bgcolor="669900"><label for="sat" id="sat">Sat</label></TD>
<TD bgcolor="90be00"><label for="tot" id="tot">Total</label></TD>
</TR>
<tr>
<th>Project Work</th>
<td bgcolor="669900"><input type="text" name="c11" size="2" value="7" onBlur="javascript:document.frm.c12.value = document.frm.c11.value"></td>
<td bgcolor="90be00"><input type="text" name="c12" size="2" value="3"></td>
<td bgcolor="669900"><input type="text" name="c13" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c14" size="2"></td>
<td bgcolor="669900"><input type="text" name="c15" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c16" size="2"></td>
<td bgcolor="669900"><input type="text" name="c17" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c18" size="4"></td>
</tr>
<tr>
<th>Internal N/C</th>
<td bgcolor="669900"><input type="text" name="c21" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c22" size="2"></td>
<td bgcolor="669900"><input type="text" name="c23" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c24" size="2"></td>
<td bgcolor="669900"><input type="text" name="c25" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c26" size="2"></td>
<td bgcolor="669900"><input type="text" name="c27" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c28" size="4"></td>
</tr>
<tr>
<th>Public Holidays</th>
<td bgcolor="669900"><input type="text" name="c31" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c32" size="2"></td>
<td bgcolor="669900"><input type="text" name="c33" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c34" size="2"></td>
<td bgcolor="669900"><input type="text" name="c35" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c36" size="2" ></td>
<td bgcolor="669900"><input type="text" name="c37" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c38" size="4"></td>
</tr>
<tr>
<th>Holidays Taken</th>
<td bgcolor="669900"><input type="text" name="c41" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c42" size="2"></td>
<td bgcolor="669900"><input type="text" name="c43" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c44" size="2"></td>
<td bgcolor="669900"><input type="text" name="c45" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c46" size="2"></td>
<td bgcolor="669900"><input type="text" name="c47" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c48" size="4"></td>
</tr>
</TABLE>
<br>
<center><input type="submit" value="Submit" /> </center>
<%
String username   = request.getParameter("userid");
String pwd = request.getParameter("pwd");
String connectionURL = "jdbc:mysql://localhost:3306/timestamp";
Connection connection = null;
Statement statement = null;
ResultSet rs = null;
String sql=null;
Class.forName("com.mysql.jdbc.Driver").newInstance();
connection = DriverManager.getConnection(connectionURL, "root","nendrasys");
statement = connection.createStatement();
//rs=statement.executeQuery(sql); %>
</form>
<SCRIPT language='Javascript'>
function update()
    alert("ciaoooooo");
    <%
        try
            String value=request.getParameter("c11");
            String value1=request.getParameter("c12");
         //   if(value!=null)
          // System.out.println(value);
           // System.out.println(value1);
        catch(NullPointerException n)
    %>
</script>
<SCRIPT language='Javascript'>
function Datevalue(date)
       // document.getElementById("dates").innerHTML=document.getElementById("sun").value;
alert(date);
         // alert( document.getElementById("dates"))
            <% System.out.println("bye");%>
</SCRIPT>
</BODY>
</HTML>

You mixed Java and Javascript in the expectation that they runs simultaneously.
You are Wrong.
You need to distinguish between the server side languages and client side languages. Java/JSP runs at the server side and produces a HTML page with other client side stuff in it like CSS and Javascript. When the HTML page is finished, it will be sent to the client and then Java/JSP stops. Once the HTML page is arrived at the client, there is no one line Java code in it, only its output/result. Do a View Source in your favourite web browser to see it. Only from that moment on, Javascript runs and/or can be invoked.
Whenever you want to use Java variables in Javascript, you need to print them out as a Javascript variable. Whenever you want to use Javascript variables in Java, you need to invoke a request to the server and pass them as parameters. The request can be either synchronous (a link or a form submit) or asynchronous (ajaxical).

Am unable to get the data from Sys.databases when i use where condition for column owner_sid

Hi all,
Help me here when i try am unable to get a data,Can some one help me with a query to get.
If it cant be done can i know why..
select * from Sys.databases
where owner_sid='0x01'
What am trying is to get a login
names from syslogin
table with respect to Sid.
Select a.name,b.name,a.owner_sid from Sys.databases a
Join Syslogins b
on a.owner_sid = b.sid
where owner_sid like '0x01'
Thanks all in Advance.....

Below are a couple of examples of how to accomplish the task. Note that SID is varbinary so the literal should not be enclosed in quotes.
SELECT
a.name AS DatabaseName
,b.name AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
JOIN sys.server_principals b ON
a.owner_sid = b.sid
WHERE owner_sid = 0x01;
SELECT
a.name AS DatabaseName
,SUSER_SNAME(owner_sid) AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
WHERE a.owner_sid = 0x01;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

I am unable to get the HUD display to appear...help

Similar Messages

Maybe you are looking for