I am unable to go beyond 15 minutes of Snow Leopard installation?

Mine Late 2009 Mac Book Air 13.3/2.13GHZ/2GB/128SSD. Came with Snow Leopard. But I migrated to the latest OS as they become available and was running
on Maveric until few days back
Form two weeks ago mine started to have lock up screen... Initially while I was on Safari three weeks ago.
Forced quit the screen but would not boot. On every attempt a single bleep at regular intervel. Tried all suggested Safe start, Command D , ect with no luck.
Left it for a day and pressed the start button the computer worked for until yesterday.
Yesterday on my attempt to install the latest updates from apple for the iWork & OS update for RAW files..Safari,the screen developed lock up.
Put in the Disk 2 of my Snow Leopard to run the Apple Hardware \Test by pressing "D" at the start.. Performed the extended test "No Trouble found" as suggested the restart went into that bleep at regular intervel...
Forced quit and when tried to start up the same single bleep at regular intervel....
Left it for 24 hours, started this evening it but the apple logo and a bar appeared below with filling upto third and switches it self off. This happened fro few times.
So I decided to connect my MacAir Superdrive and managed to put in my Snow Leopard Disk 1.. Start with "C"... It took after few attempt come up to the screen to select the language, agree apple's aggrement.then clicks in the superdrive with spinning and the bar reaches 28 minutes to go shuts down.
While in DIsk 1 went to see utility.. no error on the Mac HD.
I have tried thie few times and no further progress possible..
I have tried Command+Shift+P+R and attempted the install,failed after reaching third of the way with 28 minutes to go.
Can I some how get this working?
Regards

No,Mine was not shipped with USB OSX. I had two disks came with this computer.
I placed my order for the Mac BookAir in the second week of August 2009-The period when the OS Snow Leopard is to be released. My computer was dispatched in the 2nd Week of Sept 2009 and I was lucky the the Snow Leapoard was installed with 2 diskets in the box.
Is it possible if I sign into my account to download my Snow Leopard in a USB? How could I obtain OSX on a USB?
Regards

Similar Messages

Snow Leopard installation freezes at 25 minutes remaining

Hello,
I am trying to upgrade my software from Tiger to Snow Leopard on my 13 inch MacBook currently operating with Mac OSX 10.4.11. I put the installation CD into the computer, and began the installation process. However, at 25 minutes remaining, the installation froze and the little color wheel kept spinning on my screen. The installation disk in the disk drive kept making a sound like it was trying to continue with the process, but then the noise would die down, and then it would get louder, and die down (and repeat) for three hours. I turned my computer off last night, and am not sure how to move forward today. What should I expect when I turn it back on? What should I do to I install this new software successfully? Any assistance is greatly appreciated. Thank you!

When I select Disk Utility from the menu, will there be an option to select Repair Disk?
After choosing Language then click the Utilities Menu - Disk Utility - Click your internal HD on the left - Select *First Aid* tab and then you will see Repair Disk.
What does this process do?
It will repair the disk if it can be repaired. This may take several passes, so run Repair Disk several times. If the disk cannot be repaired it will continue to get error messages, at that point you will need to replace the internal HD.
Should the Snow Leopard disk remain in my MB while I run the Repair Disk process?
Yes!
If so, how can I start the installation process - do I need to hit a specific key or command?
After Repair Disk has successfully repaired the internal HD quit Disk Utility and continue with the installation per the on-screen instructions.
BTW I sure hope you backed up your internal HD prior to doing the upgrade, if not you have lost all of your data, settings and applications!
I don't know if this has an impact on the problem, but I did not erase or unistall anything on my hard drive before starting the SL installation process.
That's fine

Unable to boot from bootcamp to macosx snow leopard in bootcamp ctrl panel

update to bootcamp 3.2 for win 32
winxp home sp2 bootcamp,
open bootcamp ctrl pnl> select macosx to reboot> press enter> dialogue to restart now?> yes
desktop freezes, i press ctrl alt del, .. nothing get the busy/working cursor
this happened on the last update also.
so i do a hard shutdown,
is there a patch to fix this / changing registry key / editing bootloader ?
tl;dr
trying to reboot from xp to macosx in BOOTCAMP CTRL PANEL (bootcamp 3.2)
ty,
-r

trying to reboot...in BOOTCAMP CTRL PANEL (bootcamp 3.2)
I've been noticing that Boot Camp 3 is a bit more finicky when rebooting back to OSX. I'm suspecting that the desired partition is not set correctly in the PRAM/NVRAM, so the Mac is looking for a non-existent partition to boot from. Nothing that happens consistently for me; happens maybe one out of every 40-50 reboots.
The workaround is instead of using the control panel in Windows to reboot to OSX, just shut down Windows as normal, then start the Mac holding down the Option key. OSX's Startup Disk System Preference seems to set the startup disk correctly, but Boot Camp's seems to have issues. Once I stopped using the control panel in Windows to reboot, I haven't had the hanging reboot issue so far. YMMV, but something to try that's different than what you're doing now.
...i'm getting stuck at bootcamp ctrl panel > choose which os to restart to, > i select macosx in the ctrl panel, after i click yes to restart it freezes after 20 secs and it stays that way for more than 10 mins, so i hard shutdown(holding down power button)
If my suspicion is correct and the contents of the PRAM/NVRAM are corrupt (i.e.: Boot Camp Control Panel not setting startup disk correctly,) you should to [reset the PRAM|http://support.apple.com/kb/ht1379].

Boot Camp 3.0, unable to select Default startup disk in snow leopard

I've installed Snow Leopard On my black Macbook, actually upgraded on 10.5, and then installed Bootcamp 3.0 on my Boot Camp partition which is on Vista Ultimate, everything is fine but this little annoying detail! I can't select default Startup Disk when I'm in Snow Leopard. I can select default Operating system from Vista but no chance to select it from SL! Just wonder did this happen to anyone else?! and any suggestion to solve it?

Rather than use a 3rd party product to enable writing to ntfs drive you can enable native ntfs read/write support. The method is described in Mac World OS X Hints.
Use this link to the article
http://www.macosxhints.com/article.php?story=20090913140023382
You get read/write privilege and all the partitions show up in the "Startup Disk" window.

I'm unable to install anything after upgrading to Snow Leopard

I've upgraded to Snow Leopard and after that anything I try to install stops at the Install button. No error messages. No crashing. Just don't install. Even the system upgrade didn't install...
Any ideas?

this may happen if you are using a custom keyboard layout. delete the file /Users/username/Library/Preferences/ByHost/com.apple.HIToolbox.* and log out/in. then try installing something.

I am unable to download from safari, I use Snow Leopard

Hi,
I tried downloading MY WOT for Safari, it starts to do so but then just disappears, I tried several times to no avail. I do not use Safari all the time, I mainly use Firefox latest version. My version of Safari is 5.1.9, I keep all software up-to-date, why is this problem happening, can someone help please.
rachealfromva

Have you tried here:
http://www.mywot.com/en/faq/add-on/safari

I am unable to install Snow Leopard on a MacBook Pro

Hi
I am unable to update to Snow Leopard on my MacBook Pro. I have 2 GB of RAM. When I boot from the install disc I get an error message that this OS cannot be installed on this machine. Sorry, I don't have the error verbatim.
Am I missing something in the system requirements?
Is there another OS I need to install prior to installing SL?
Thanks
Andrew

Not impossible, but not likely, either.
I don't know why people keep telling me that what I saw couldn't have happened or is very unlikely. Whatever.
There are not many third party applications that can interfere with this, although maybe there are a few hacks & system 'enhancers' that could.
Little Snitch is not something that most people would call a "hack", and lots of people use it. I meant to quit it, and any other third-party background processes, but forgot. Shortly after I started the Snow Leopard installation, I _saw it block a connection attempt_ by the installer. I allowed the connection, but nonetheless something went wrong. When everything completed and my machine restarted, I still had 10.5.8... absolutely nothing had changed. (I'm not complaining about the "nothing changed" part... I could have ended up with a destroyed system and I didn't.)
I rebooted from the SL disk, repeated the installation and everything went fine.
Moral of the story? Do your system installs in the most controlled environment possible, which means rebooting from the disk.

TS3626 Mac os x 10.4.11 unable to install snow leopard

I couldn't install osx snow leopard family pack in to my Mac osx 10.4.11?? I've tried many times. It's start installing aswell but after 10 to 15 minutes it's stops with the error says couldn't install on your computer.. The installer could not copy the necessary files.click restart to restart your computer and try installing again.
I have a intel core 2 duo processor, speed 2ghz memory 1 gb..
Please help me solve this problem.

I suggest the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Boot From The Snow Leopard Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
Quit DU and return to the installer. Install Snow Leopard.
E. For updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GS - VRAM: 512 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
    Hitachi HDS721010KLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.warmd_agent.plist
    11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    org.cups.cupsd.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    ChronoSyncBackgrounder    Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Google Drive    Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    WebEx: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    VIA PrefPane [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         3%    Mail
         2%    com.apple.iCloudHelper
         1%    Creative Cloud
         1%    Google Chrome
Top Processes by Memory: ℹ️
    223 MB    Google Chrome
    150 MB    Finder
    129 MB    Google Chrome Helper
    112 MB    Mail
    69 MB    Google Drive
Virtual Memory Information: ℹ️
    35 MB    Free RAM
    1.45 GB    Active RAM
    1.45 GB    Inactive RAM
    888 MB    Wired RAM
    27.01 GB    Page-ins
    851 MB    Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I am unable to get beyond the "sync with iTunes" splash page after connecting my iPhone; every tab is grey. What gives?

I am unable to get beyond the "sync with iTunes" splash page after connecting my iPhone; every tab is grey. What gives?

Is the computer the one the device normally syncs with?
If not, sync with the computer it normally syncs with.
If it is, place the device in DFU mode (google it) and restore.

After updating ios 7.0.6, unable to go beyond opening page.

After updating ios 7.0.6, unable to go beyond opening page. For manually restoring backup, it asks to turn off Find My Ipad, but cannot access beyond opening page to do the same. Itunes shows there is data in the ipad.
My options are 1. Set up as new ipad 2. Restore from iclodbackup ( not backed up to icloud)3. restore from itunes backup.
Plese help.

1. Turn router off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings.

Unable to read beyond end of the stream

I am coding a Training log for a college project and I am getting this error:
An unhandled exception of type 'System.IO.EndOfStreamException' occurred in Microsoft.VisualBasic.dll
Additional information: Unable to read beyond the end of the stream.
I have no idea where I have went wrong, could anybody please help and explain how what I have done wrong here is my code for the error:
Private Sub drpRunner_SelectedIndexChanged(sender As Object, e As EventArgs) Handles drpRunner.SelectedIndexChanged
FileOpen(2, "Training.dat", OpenMode.Random)
Dim Runner As RunnerRecord
Dim Value As Integer
Value = drpRunner.SelectedIndex + 1
FileGet(2, Runner, Value) 'This is where I get the error
If drpType.SelectedItem = "Swimming" Then
txtMilesInput.Text = Runner.MetresSwam
txtTimeInput.Text = Runner.TimeSwam
txtSpeedInput.Text = Runner.SpeedSwam
txtCaloriesInput.Text = Runner.CaloriesSwam
txtWeightInput.Text = Runner.WeightSwam
ElseIf drpType.SelectedItem = "Running" Then
txtMilesInput.Text = Runner.MilesRan
txtTimeInput.Text = Runner.TimeRan
txtSpeedInput.Text = Runner.SpeedRan
txtCaloriesInput.Text = Runner.CaloriesRan
txtWeightInput.Text = Runner.WeightRan
ElseIf drpType.SelectedItem = "Cycling" Then
txtMilesInput.Text = Runner.MilesCycle
txtTimeInput.Text = Runner.TimeCycle
txtSpeedInput.Text = Runner.SpeedCycle
txtCaloriesInput.Text = Runner.CaloriesCycle
txtWeightInput.Text = Runner.WeightCycle
Else : MsgBox("Please select your type of training")
End If
FileClose(2)
End Sub
End Class

The Training.dat file is empty, if that is what you mean it needs to be to start off with because in my program you need to enter the training information and save it, here is the code to save and it is all used on the same form:
Private Sub btnSave_Click(sender As Object, e As EventArgs) Handles btnSave.Click
Dim RR As RunnerRecord
FileOpen(2, "Training.dat", OpenMode.Random)
If drpType.SelectedItem = "Running" Then
RR.MilesRan = txtMilesInput.Text
RR.TimeRan = txtTimeInput.Text
RR.SpeedRan = txtSpeedInput.Text
RR.CaloriesRan = txtCaloriesInput.Text
RR.WeightRan = txtWeightInput.Text
ElseIf drpType.SelectedItem = "Swimming" Then
RR.MetresSwam = txtMilesInput.Text
RR.TimeSwam = txtTimeInput.Text
RR.SpeedSwam = txtSpeedInput.Text
RR.CaloriesSwam = txtCaloriesInput.Text
RR.WeightSwam = txtWeightInput.Text
ElseIf drpType.SelectedItem = "Cycling" Then
RR.MilesCycle = txtMilesInput.Text
RR.TimeCycle = txtTimeInput.Text
RR.SpeedCycle = txtSpeedInput.Text
RR.CaloriesCycle = txtCaloriesInput.Text
RR.WeightCycle = txtWeightInput.Text
End If
Dim RecordNumber As Integer
RecordNumber = drpRunner.SelectedIndex + 1
FilePut(2, RR, RecordNumber)
FileClose(2)
MsgBox("Your information has been successfully saved")
End Sub
P.S I don't know why I saved the Structure as a different name from the last I just decided to leave it as it is since it was quicker

I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

Hi
Trying to get a picture of it.
• Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
• Any other hard disks connected ?
• If so - Formatted as ?
Yours Bengt W

Unable to download beyond 50%, what to do?

unable to download beyond 50% what to do?

Not my site.
So, which is it that you want to download?
Adobe Acrobat Pro (not free, but a 30 day trial)?
Or Adobe Reader (free)?

Password Lock - How do I extend the lock device beyond 30 minutes?

It is very annoying that after 30 minutes the Q10 automatically locks itself and the password has to be re-entered. During a working day can be frustrated. In settings there seems to be no way of extending it beyond 30 minutes.
With my old bold it wasn't necessary to keep doing this.
any ideas?

If you are connected to a Blackberry Enterprise Server at your employer this might be a setting they enforce and you can't change this.
If you only use your Q10 privately you can switch off the password completely.
BTW, this is a security feature. If someone finds or steals your phone and if it never locks, everything can be read out.
We have a company policy to lock the device after 15 minutes.
Blackberry Engineering in Switzerland - Dexion Services AG

I am unable to go beyond 15 minutes of Snow Leopard installation?

Similar Messages

Maybe you are looking for