I am unable to hear my callers. the vloume is to low how do I fix this?
My volume is turned up but I can barely hear my callers when I receive calls. How do I fix this?
My volume is turned up but I can barely hear my callers when I receive calls. How do I fix this?
Similar Messages
-
Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,
I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed) -
My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?
Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i -
My headphone jack is a little screwy i have to hold or put my headphones a certain way for me to hear what ever i am listening to. How do i fix this? if apple fixes this how much will it be?
Hello mr_sillypants,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot this issue:
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Take care,
Alex H. -
I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anywayOn Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/ -
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
when i use imessage it just shows me as a blank bubble but the reciever can see it. how do i fix this?
Hi there jordzee,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help
http://support.apple.com/kb/HT1808
-
iTunes is saying that I have over 4.78 GB under the category of "other", making it so my iPhone 4 can't add any data (music, apps, pictures, etc.). I'm currently using only 1.3 GB of storage on my iPhone, and the rest is "other". How do I fix this?
Not if you sync your contact to itunes using the program provide i.e outlook..etc
-
Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??
== I DOWNLOADED UPDATE 3.6.8Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading... -
I have a bar of disrupted bar across the top of my screen, How can I fix this?
I have a bar of disrupted bar across the top of my screen, How can I fix this? I have a Macbook air, and this appeared yesterday, and didn't go away when I powered off. It looks liek little verticle multicolored lines about 1cm in length.
Thanks!
TanyaReset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
When I move a shape or text in Photoshop, the dimensions/size changes. How do I fix this?
It's always a decimal point too.
ex 1) moved a 20px x 40px rectangle, and rectangle's dimensions changed to 20px x 40.16px.
ex 2) moved a 124pt text to the right (Shift + arrow right a few times) and text changed to 14.06pt.When I move a shape or text in Photoshop, the dimensions/size changes. How do I fix this?
It's always a decimal point too.
ex 1) moved a 20px x 40px rectangle, and rectangle's dimensions changed to 20px x 40.16px.
ex 2) moved a 124pt text to the right (Shift + arrow right a few times) and text changed to 14.06pt. -
It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?
Hello Whitney262,
Thanks for using Apple Support Communities.
I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases. The article below will walk you through the entire process:
Download past purchases
http://support.apple.com/kb/ht2519
Take care,
Alex H.
Maybe you are looking for
-
How to set a New Tab as the start page in Firefox and lock in my choice of web sites
You may set the New Tab page Firefox shows when opening a new tab as its start page, and you can lock in the web sites you want displayed there. I set my browser to open a New Tab as its start page and have locked in six destinations from which to ch
-
How do you change the setting to open the pdf instead of automatically saving it somewhere?
-
Query elements while collecting objects
HI, I have a query ,when i have changed some objects(means properties of chars and added some chars to rows )and save in a request .if i check in a SE09 particular request . i'm not able to understand those elements of technical names. can anyone he
-
I recently bought myself a new digital camera. But for some reason this camera needs software to load. I plug the camera into my ibook and no disk shows on the desktop. However when I use their garbage easy share software it works. I do not want to u
-
Search Help for classification chars. based on external tbl within E.DMS
Search Help for classification chars. based on external table or function moudle are not supported from E.DMS Gui. We would like to get F4 functionality like standard SAP Gui (select a value from a dynamic list of an existing SAP table). I have follo